Cannot access TSetup on my Tecra 8200

Similar Questions

• I can connect to the WLan, but cannot access the internet on Tecra A8

  There is no problem when I use the LAN port.
  When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet.

  I've updated my access point with the latest firmware (D-link DWL-2000AP +).
  I do not get a new IP address.

  My OS is Vista.

  Hello

  You have set up the WLan router with the right data from your ISP (internet service provider)?

  Further, I would recommend to disable all security on the router option and try to access the internet.
  I mean, you must disable the encryption (WEP, WPA), Mac filtering address, etc.
  In addition, check if, in settings TCP/IP, the option as "obtain an IP address automatically' has been set.

  Have you tried the WiFi connection using the customer like Intel ProSet utility or Atheros configuration tool?
  These tools can be used instead of own WLan connection option of Windows.

  Reset you the WLan router? This!

  Pleas check al these proposals

• Cannot connect Tecra 8200 wireless network

  I have an old laptop Tecra 8200, I recently bought a wireless router but I can't get the laptop to connect to it.
  He sees the network and attempts to connect to it, but after a few minutes it stops and returns looking for available wireless networks.
  The laptop uses windows XP with service pack 2.
  Everything on the laptop is standard and I did no improvement to him so there the standard network card. I don't know if this is the problem and that is that I'm not sure what network card enough.

  What card Wlan do you use?
  Check Wlan card details in the Device Manager.

  Looks a bit a problem of compatibility between the wireless network card and router.
  Please make sure that your wireless network card uses the same Wlan standard IE. 802 11 B G etc. as the Wlan router.

  What you could do is update the Wlan driver too.

• WiFi on Tecra 8200 after installing XP SP2

  I am running XP service pack 2 on a Tecra 8200.
  The problem is that the wireless card cannot detect any wireless router.
  I use a belkin G wireless router and it works, checked with another pc with a wireless card.

  However the toshiba wireless client shows no wireless network, the router or another computer.

  I have the antenna turn on and how to configure a wireless connection.

  I tried the old drivers and tried a number of drivers out of this site and others.

  But I had still not everything yet, does anyone else have this problem or a solution to this problem

  Hello

  If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.

  There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).

  Good bye

• Tecra 8200: flicker of brightness of the screen on the use of the battery

  I have a Tecra 8200 running Windows 2000 Pro. The problem is with the brightness of the screen flashes intermittently, all a few minutes when it's on battery. The Toshiba power saver utility seems to work OK. his answer seems to depend on remaining battery life, that is to say less than 50% there is no difference between 'normal' and 'long life' with regard to the brightness of the screen.
  Superior to 50% there is no difference between 'normal' and 'high power '. There is no problem at all when running on the current.

  Recently, I changed the battery; the original was a PA3062U-1 bar, but the news is a PA3062U-1BAT. Can that be a problem?

  Hello

  The new battery is the right specification for this model of computer Tecra laptop and on I think that the battery cannot be responsible for this.

  If you try what Tom suggested it please let us know about the results.

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• Tecra 8200 built in WiFi Lucent

  I have a Tecra 8200 running Windows 2000. I ran all the latest news from the BONE. I put the built in Wifi Lucent card and can communicate Ad Hoc with an another toshiba laptop with a wireless Belkin 54 g card. After a few minutes of inactivity, the Tecra 8200 can no longer access the remote computer. The only way to regain access is to the computer remote ping of the IP address of the 8200.I have had the same problem with several remote machines and several cards from Belkin, so I suspect now that the problem lies in the Tecra 8200.Can someone help?

  Hello

  Do you use the Toshiba Toshiba Wireless LAN Client Manager and Wireless LAN Client Manager to set up peer-to-peer connection?

• Installing OS on Tecra 8200

  Hello world

  I really appreciate the help with installing OS on HD on Tecra 8200. The original HD crashed so I bought replacement HD to an add-in in the local newspaper. This disk should be formatted but otherwise empty. After I drag the drive into the Bay and put the power, "GRUB loading stage 1.5" appears on the screen and then any time the word "UBUNTU" and then a long message beginning with: "cannot start X server...". "etc. (probably something to do with Unix).

  My Tecra has no floppy drive, just DVD player and I can't find a way to make the machine begins to read the Windows 2000 installation CD in the DVD player (or perhaps the HD should be reformatted first but where to start?).

  Thanks a lot for any help or suggestion.
  [email protected]

  Hello

  to install Windows 2000 simply press the 'C' button when you see the Toshiba logo at startup. This button causes to boot from the cd and you will be able to install windows.

  Good weekend and if you have any questions...

  Welcome them

• Tecra 8200: After SP2 computer laptop installation keeps rebooting

  Hello.

  I am running Windows XP Pro in my Tecra 8200 and decided to install SP2 (oh error) now, whenever I turn it on I go as far as a blue screen with the following message
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  After my laptop keeps restarting - boots - blue screen again. I have tried everything to connect to windows to uninstall SP2, but I can not connect.
  I tried to change the boot sequence (some ppl said that it was starting in LAN), I disabled the CPU Cache and L2 in the BIOS and still nothing. If I turn off reset on the failure of the system (as some other guy suggested) I just can't not anywhere either.

  Unfortunately, I do not have the boot floppies so I can not format the laptop.

  Now I know why that is happening, but the answers I get is to uninstall SP2, update the Bios, or to download patches, but I can't make one any of them because I can't get into windows, even in safe mode.

  Someone at - it ideas?

  Hi Hector.

  If you cannot start in safe mode, and then unfortunately mode your only real option is to reinstall your operating system to the original recovery disks.

  I think something went wrong during the installation of SP2 and this has led to the corruption of one or more of your system files.

  I also recommend that you take a full backup of your system before attempting to do a re-installation of SP2 so that you do not have to depend on start-up in Windows to regulate if necessary.

  Personally I take a picture full backup to an external hard drive using Norton Ghost before applying any big maintenance work on my own laptop.

  HTH

• Tecra 8200 docking station

  Hello @ all!

  I have a Tecra 8200 laptop computer and want to install a Docking Station.

  I built everything in.

  But I had a big problem:

  When I take the laptop in docking station that has contact with the Docking Station, the laptop can not find a PCI driver. I can't find this driver Notebook searches. I had installed all the drivers that was available on the Toshiba site.
  But I got the same research memoire.esolutionle Nooteboom PCI card unknown that AIDA can not find.
  And the Nooteboom cannot find the Epansion Station

  The next problem is when I take an E-station IDE cable in a drive hard or on a cdrom drive, it curbs the power for this hardwareparts.

  Could someone help me?
  Thank you

  PS: Excuse my bad English

  Hello

  you have the 1DST PA3018E? It won't be back with the PA3017E Docking Station/Port Replicator.

  Stefan

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• Tecra 8200: How to get the WPA encryption?

  How can I get wpa running on my tecra 8200. I installed Windows XP SP2, but it still doesn't work.

  Where can I download an update of the firmware of WLAN card because it's my last hope...

  Hello

  It depends on the properties of material WLan if you use WPA encryption option.
  You cannot enable this feature by updating the BIOS or the installation of SP2.
  As far as I know, this wireless network card supports only WEP, but not a WPA encryption.

• Tecra 8200: Wifi and LAN Manager client problem Win2k Pro

  Hello

  I just install win 2000 pro on an old Tecra 8200.

  The "LAN client manager" says that I'm connected to the wireless access point but windows icon indicate that the wire is cut.
  Is there anyone know how to fix this?

  Thank you.

  PS: I get the latest software and driver on Toshiba website and the wifi switch power switch is turned on.

  Wait a minute: you can use WLAN or not? You are just irritated because of this icon of windows or what?

• Cannot access page Plugin-based PDB (protein Data Base)

  OS: MacOS Yosemite 10.10.3. Cannot access the http://www.callutheran.edu/Academic_P.../lzipmast.htm Web page that uses a plugin of the PDB. I don't know if there are plugins for this format (s?), in FireFox, or anything else besides. Safari reports that "the sype file not specified", so maybe there is a mistake in the Web page itself (humor: "these biologists are sloppy with their microscopes to $5 million and more, but they don't know much about computers..")

  This page has not been modified since before that Firefox is a browser. There is probably a plugin for Internet Explorer v6 that will display that content. But you'll need a computer with Windows XP SP1 which is never updated Internet Explorer, and then find and install the plugin to make it work.

  You can download the file directly, if you want to try to find a program that will open its doors this: http://www.callutheran.edu/Academic_Programs/Departments/BioDev/omm/lzipper/pdbs/lzipdna1.pdb

• Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

  Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}