cannot access wireless internet every time I start up computer... do it manually
whenever I start my computer I have to click on start then run and type "services.msc" then press ok, and then click wireless zero configuration and start it. then make a right click on the little computer with waves on the bottom right of my view select tray of wireless networks and then select change the order of preferred networks, and then under the networkes wireless tab check use windows to configure my wireless network then go back and view wireless to connect to the internet...
is there a way to correct so I don't have to do that every time I start my computer?
Thank you
Noelle,
You can go to Device Manager and remove the wireless network adapter. Then go to the website for the manufacturer of PC and download the downloaded current drivers. Then restart your PC, and after that he finds the card even once use the new drivers with it and see if that helps.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
SQLite3.dll error every time I start my computer...
I have Windows 7 and I get this message every time I start my computer...The program cannot start because sqlite3.dll is missing on your computer. Try reinstalling the program to fix the problem.
How can I get rid of him?SQLite3.dll means SQLite, a lightweight SQL database engine.
SQLite is used by several popular software - and I think some software need to use SQlite is installed on your computer and is set to start when the system starts.
Press the Windows key + R, type in msconfig and press the Enter key. Select the tab "start". Now, uncheck an entry, click OK and restart your computer. If you still receive the error message, open msconfig again, check the entry you previously unchecked and uncheck another entry, click OK and restart.
Continue to do so until you discover unchecking what entry causes the sqlite3.dll lack error disappears. Post here some details on this boot entry.
Furthermore, according to the http://sqlite.org/mostdeployed.html McAfee products using SQLite. If your computer came with preinstalled McAfee and you uninstalled, it is possible that some parts of it were left after uninstalling. Try using the McAfee removal tool , and then restart your computer. If you are currently using any McAfee product and face problems with components such as the antivirus, try using McAfee Removal Tool, and then reinstall McAfee product.
-
Windows firewall stops every time I start my computer.
OT: I have to pass Windows Firewall, every time I start my computer. What is this caused by a virus or a bad setting in Windows?
Whenever I turn on my computer, I check that the Windows Firewall is enabled. It is still off and I have to turn it on.Hi Tony McLaughlin,.
1. what operating system is installed on the computer?
2. are you aware of any hardware or software changes, prior to the beginning of the question?
3. you have any third-party firewall installed on the computer?Method 1
The Windows Firewall will close if you have any third-party firewall is running on the computer. I suggest you try the steps from the following link:Windows Firewall is turned off every time I start my computer
http://TechNet.Microsoft.com/en-us/library/cc749262 (v = ws.10) .aspxMethod 2
To start the Windows Firewall service.
a. Click Start and all programs and type services.msc in the run window and press ENTER.
b. find Windows Firewall services and put him automatically and rstart services and verification.Additional information:
Security Warning: the Windows Firewall is disabled
http://support.Microsoft.com/kb/2288085 -
Original title: user account number.
I've set up a user account already but every time I start my computer the home / log on screen does not appear
Hi willy79,
How many accounts do you have?
You can check if the Welcome screen is enabled in your computer.
For more information, refer to this link: to turn the Welcome screen on or off
Hope the helps of information.
Please post back and we do know. -
Startup.exe appears every time I start the computer.
OT: start
When I start my computer 'setup.exe'.s (with quotes) always appears. After seceral closing click it disappears. It is very mysterios. Can someone help me?Meredith
Hi Meredithjane,
You did changes to the computer before the show?
Method 1
Step 1: I suggest to start the computer in safe mode and check if the problem is resolved.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: if everything works fine in safe mode, I suggest to perform clean boot and remove the program that is causing the problem.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.Method 2
I suggest you run virus scan online by using the Microsoft safety scanner.Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote:
when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data. -
Cannot access wireless internet.
original title: have five bars on my connection Wireless in the toolbar with a yellow triangle on it... can not access internet... can you help me? have already unplugged the modem. What can I do else? Thank you.
having five bars on my connection Wireless in the toolbar with a yellow triangle on it... can not access internet... can you help me? have already unplugged the modem. What can I do else? Thank you.
Hi Craig d. Payne.
· What operating system is installed on the computer?
You can run the troubleshooter from network first to see if it can help diagnose and solve your problem.
a. open the of Internet connections Troubleshooter by clicking the Start button, then Control Panel.
(b) in the search box, type Troubleshootingand then click Troubleshooting. Under network and Internet, click connect to internallyt.
Access the following articles to learn more about troubleshooting of network services:
Network convenience stores
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Let us know if that helps.
-
I just downloaded avg to 2012 and every time I start my computer my firewall is disabled?
When I start I go to maually and turn on my firewall. all started to do that after I down loaded avg 2012. never had any problems with the 2011 version. any suggestions?
Hello
Are you sure you have not installed the trial version of AVG Internet Security 2012 which includes a firewall?
Check with the support of the AVG and in their forums.
AVG support
http://free.Avg.com/us-en/supportAVG forums
http://forums.Avg.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
What do I have to pay and install another program to reinstall? How to know it is legitimate and doesn't contain viruses?
Hi SueBlack,
1. did you last changes made on your computer before the show?
2. how many time you receive this error message?
3 do you have Electronic Arts Download Manager (EADM) installed on your computer?
Qtcore4.dll could be part of EADM (Electronic Arts Download Manager) and should be in c:\Program Files\Electronic Arts\EADM directory (for 32-bit systems).
I suggest you to perform the following troubleshooting methods:
Method: 1
Configure the computer to start in minimum mode to determine which application is causing the problem.
To set up your computer in a clean boot, follow the steps from the following link:
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Method: 2
Also, I would say download you Microsoft Safety scanner and scan you computer for viruses.
You can download Microsoft Safety scanner from the following link.
-
I tried unpin it, but it's always open.
Whenever I start my windows appears in this Web site - > http://stabgames.org/ I noticed that it uses CMD to start this Web site, the problem is I have no idea how to remove it. I have attached the picture of the CMD console that shows how it starts the virus.
-
I just want to turn on the computer and not necessary to use a password. I am running VISTA on a ACER aspire 9410-2028
Hello
This should help you:
"How to Log on automatically on startup of Vista '
http://www.Vistax64.com/tutorials/66966-logon-automatically.html
See you soon.
-
It seemed to happen after avg removed a virus.
Windows 7 Home Edition premium on an acer aspire 5742.
Launch msconfig and on the Startup tab, closely check entries and disable the bad.
Probably left AVG a remnent when remove it we infection.
Also try the free http://www.malwarebytes.org/products/malwarebytes_free/
-
Every time you start, my 4 monitors rearrange their order - it is not included on the desktop
Recently, I downloaded several updates to Windows Vista. Among them have been updated for my NVIDIA GeFroce 6200 display THE and NVIDIA nForce Networking Controller. Restarts, 2 of my 4 screens would not appear. By checking Device Manager, there was a mistake with the controller who controlled the 2 monitors. The failure of two attempts to restore to a previous download time. Then I downloaded a driver for the controller by mistake and was able to resume all 4 screens.
However, when the computer reboots, monitors have been rearranged in order on my desk and a remained dormant. I can bring to the top of the screen 4 by extending to the desktop under display and, at the same time settings, change the location of my primary monitor. However, I don't want to do it every time I start my computer. Also, all my icons was reorganized. Any ideas how I can stabilize my understanding of monitor on my desk?
Hi Wandwinc,
We faced such issues and others such as the screen resolution changes at each restart, some BSOD etc a few recent updates released by Nvidia for their graphics cards.
I suggest you restore to an earlier version display driver and check what is happening.
http://www.nvidia.com/object/notebook_driver_instructions.htmlIf this helps you fix until the question, let not install, update the drivers from windows update as well, they are compeltely checked by Nvidia.
I suggest contact you Nvidia if possible.
http://www.nvidia.com/page/support.htmlConcerning
Terminator -
Check disk every time you start
Inspiron 5100 XP SP3
Every time you start the computer says "disk Check is scheduled" and immediately starts a disk check that was more than an hour. I can cancel by pressing ESC, but even at every startup. Looks like I could uncheck something in msconfig/startup but what startup item? Any help?
-
I have xp sp3, and every time I start internet explorer 8, it opens closes again on his own why? HELP PLZ?
See if this article solves your problem:
"Internet Explorer opens, flashes and closes immediately when you start"
<>http://support.Microsoft.com/kb/967896 >HTH,
JW -
How can I disable the onion? every time I start Internet onion appears, what should I do to turn it off?
· Click Start on your desktop
· Type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
Go to the Startup tab, locate Internet onion and uncheck the box to open at startup.I could also go into Panel, programs and features and see if you can uninstall Internet onion.
Thank you
Maybe you are looking for
-
Often, I have six or seven centers open their doors at a time when I am browsing. When I 'x' on Firefox now, they aren't there when I log in again. I want to be there, so I don't have to find them whenever I log in.
-
Windows 8 wireless adapter do not work?
Well, I just installed windows 8 but my wireless adapter don't work; ( ! I have a hp 802. 11b / g wireless network adapter! I have a HP Pavilion a6023.sc stationary PC! Please help ASAP!Kevin
-
Help with cloning of my screen of my HP laptop for my AOC monitor
I have a 17 "HP ProBook 4710 running XP and want to clone my display to a portable monitor, AOC F19s LCD widescreen, for demos of software. When I click fn f4 I can't get it to appear on one or the other screen and not on both. I tried changing the s
-
black screen of HP pavilion g6 doesn't initialize-go to top.
HP pavilion g6 1d63nr-ram; hard drive; fan; power light have all be checked right after trooubling with the information provided. I have a reminder plug LS - 15 (need Rreplacement) this could be the problem? Is their damage to the motherboad?
-
How update the content id when importing via archiver
Hello Experts,I need to migrate some documents one env to another (about 500).The problem is all content IDS are duplicated between the content source and target servers.even if they have the same ID of content that they are not duplicate/revisions o