Cannot access wireless with linksys WRT54GS router

Similar Questions

• Problem with my WRT54G Router.

  Hello!

  I have a problem with my WRT54G Router. From time to time, he will leave the connection but it back a few seconds later. Now, it is an annoyance, whenever I try to stream a video game or even simply online.

  The problem could be related to my modem? Or my ISP? The router itself has 2 wired computers sharing the internet connection. The connection is dropped on both computers, of course.

  Now, this situation can also hit its use torrent? I was the client download of World of Warcraft official website and it seemed to keep the speed of around 25 KB/s. That really seems low given the amount of seeders and the overall performance of my connection.

  I appreciate any help and I can also provide any additional information.

  Try to reflash/upgrade of the firmware of the router. You can download the firmware from the linksys Web site. After upgrading the firmware, reset the router, power cycle it and re - configure the router from scratch.

• I am unable to connect to the Linksys WRT54G Router with wired connection to Office XP.

  My two laptops (XP and a Win7) will be connected to the router wireless and wired (ethernet). When it is plugged directly into the DSL modem, the Office connects and works very well. This problem started when I had to replace the DSL modem.

  I inherited this problem for my elderly mother... and it all started because they gave me the router password wrong, who now works (router has been reset) on two laptops, but when connected, the Office doesn't even show a light of connection on the router except during startup. I no longer get a window of logon passwork for the router, and I am unable to connect/ping the router in the office. (192.168.1.1)

  I would like to clarify a few things.

  1. two laptops work fine with cable connections and wireless through the WRT54G.

  2 desktop PC, which has only a wired connection, does not connect successfully.

  3. the symptoms of the failure of the desktop connection to are that the link on the router at the start light flashes during initialization of the PC but then will Dim.

  4. when the desktop PC trying to connect to the internet, it fails.

  5 when the desktop PC try to connect to the administration WRT54g page it fails.

  6. when the desktop computer try PIING the router at 192.168.1.1 IP address it fails.

  These points are correct?

  Assuming this is correct, open a command prompt and type

  IPCONFIG/ALL

  The output of the command should provide some information about the current state of the network connection.

  It would be useful that you posted this here release.

  The absence of a link light can be your main symptom and may be due to several reasons. He probably has an associate status "media disconnected" in IPCONFIG for the network connection.

  This could be caused by a bad network cable or a network connection disabled in the properties of the network on the PC. Small jets knowing the ot IPCONFIG output is would help more.

  Post this info if you can.

  Good luck

• Cannot access the configuration of my router (wrt54g) page

  I can't access the page of my router (wrt54g) configuration after the installation. The router works fine, but whenever I try to connect to 192.168.1.1 it says the password is incorrect. The first time that I put up I changed the default user name and password and I thought I'd simply forgotten, so I reset the device. This time I don't change any of the default values, and I can not even log on. I have to reset it several times, and you're just annoying. Anyone know how to prevent it from happening? I thought it might be a firmware issue, but I can not find all downloads for my version of road ' rs (V8). I use a macbook pro, osx 10.9.2.

  My neighbor has pretty much the same question. Did some research and found many people with similar problems. Probably time for a new...

• With the wrt54g router wireless security - separates the WLAN LAN clients

  I have a wrt54g router and want to separate clients WLAN access to computers and servers on the local network... in other words, I want to make a 'guest' network I put the router in 'router' instead of 'bridge' mode I want just to be sure if it's the best thing I can do in terms of transforming the network wireless in an isolated.

  Check out the 3rd party firmware like dd - wrt.

• WRT110, Vista, wired desktop cannot access utility based on the router's web

  Computer Vista hard wired to the WRT110 cannot access the router. But it CAN get to internet and CAN ping router without losses. The XP machine is wireless, can get internet and CAN ping router without losses, but also can NOT access the router page. Ipconfig displays 192.168.1.1 is the correct default gateway address.  Yesterday, I had to reset the modem to access the router and had to enter all the parameters.  Could access router yesterday but can't today. The IP address is valid from yesterday to tomorrow. I don't understand what has happened to prevent access to the router. I even unplugged the modem to the router and still cannot access router today.  I can't find this problem in the forum, hope this isn't a duplicate request. Thanks for any help

  I have NO idea why, but I can access the Web with IE8 installed utility pages.  Has absolutely no sense to me.  Of course, it must be some kind of safety but my IE use medium-high settings, so I can't imagine what passage of IE7 to IE8 did indeed these parameters.

  Happy now that I can access these pages, finally.  Hope this helps someone else.

• Cannot print wireless with Canon Pixma MG3120 but can print via USB

  Original title:

  thing.i same cannot connect wireless on mypixma mg3120 printer.did reinstall and shows ok to print, but will not go wireless when I disconnect usb setup cord.tryed everything to fix.

  Hello
   
  Method 1:
   
  Check out the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  Method 2:
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  Step 2: Install the drivers from the disc and check.

• Cannot access ftp with my windows vista and firefox sites

  On Windows Vista with FF and OracleVM with Ubuntu LINUX/FF. get same error on both Ubuntu
  and the Windows partition. I made my mistake checking on Windows & FF
  Any ftp site, including sao - ftp.cfa.harvard.edu gives the time limit check error message.
  Checked the window firewall and config port 20 and 21: NO DIFFERENCE
  Tried ftp://ftp.mozilla.org/pub/extensions and ftp://ftp.mozilla.org: NO DIFFERENCE
  Responsible for FireFTP and tried above sites: get the message unable to connect, please try again
  By cor - el on earlier thread tried https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/

    IT WORKED!
  

  Then tried https://sao-ftp.cfa.harvard.edu/pub/transfer/nlee/acis_bkgrnd_4.5.7.tar.gz
  Warning windows server unsecured; has asked during the trip. Then received message of hea - www.harvard Port 443 NOT FOUND

  COR - el or someone you suggest a solution?
  Thank you very much

  PROBLEM SOLVED
  Problem was with the COMCAST router firewall. Their technical support fixed within 5 minutes after my third try with them.

  Thanks for your help.
  Lew

• connect to hp 2540 wireless to linksys WAG200G router

  I try to connect the HP DESKJET 2545 to the Linksys WAG200G router via the USB cable and the HP software. The software detects the router and the parameters (name SSID and password) but finally when it tries to connect, it says that the name of the network (SSID) is not found.

  I have enterd the router manually settings and I still get this message.

  I have disabled the firewall on the router and still nothing

  Help, please

  Thank you. Isolved the problem. Just use another browser. I used google Chrome instead of internet explore and everything went well

• Cannot access Internet even if the router USB adapter Wireless G made the connection and

  Hello, I recently bought a Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC to go with my Wireless-G Broadband Router model WRT54G2 and I can't access the internet.  The laptop tells me I am connected and that force is Excellent, but when I open my browser, I can't access any site at all. When I try to add the laptop to my network magic on my computer, it tells me that it cannot connect with the laptop.  My Nintendo Wii and Itouch work perfectly with the router so I think it's my browser settings, but I can't understand it.  Thank you!

  Hey, thanks for trying to help out.  It turns out that my firewall did not allow the laptop to access the internet.  I made a few adjustments on my firewall settings and it all worked out great.

• LG Wireless adapter upward adjustment to work with the WRT54G Router

  My parents recently bought a TV high definition LG and they got a wireless adapter to LG for it (YEAR-WF100). My brother was able to insall, but when trying to connect to the router, we get an error message saying DHCP must be enabled. From what I see when I go in the settings of the router, DHCP is enabled. We are pulling our hair out trying to figure out what we need on the router so that it works settings. We tried the two setting up the connection manually and automatically with the IP, gateway, etc. I don't know what other information is needed, but I'll give you more details if anyone has any ideas. We have also two apps created by Applications and games tab (Nintendo DS and Wii). I do not know if that might interfere with anything. Any help would be appreciated!

  After spending two hours on the phone with the Geek Squad (Fortunately it was free), we found the problem is that the router was set to WEP settings, and it must be WPA. Too bad the Nintendo DS only supports WEP. I guess I can just switch back to WEP when I go online on the DS. Thank you for taking the time to help!

• HP Deskjet 3510: Cannot connect wireless with new router

  I got a new modem with router wireless integrated into my cable company.  Now, I am unable to connect wirelessly to my printer. He seems incapable of finding new wireless information.  The closest I could get the printer screen advised to 'hold the WPS button. '  However, my cable company has confirmed that the WPS NO button there and is not an option.

  Can someone help me get my printer working again?  Thank you!!

  @LisaC11

  Printer:

  E-all-in-one printer, HP Deskjet 3510 range

  Full software features:

  File name: DJ3510_1315 - 1.exe

• Problems of authentication of wireless with Linksys router after the recent updates

  No authenicate password for wireless connection

  Problem solved once the computer has been restarted two times, first time we just restarted it and same problem, second time stop and started them it authenicated normally. My other computers on the network worked well once the updates, just a computer that would keep asking password of the router, if you put it in the right pair invite just, once again, if you enterd in incorrect password, it would bring a window (incorrect password). The installed updates were KB981322 KB2347290, KB975558 KB905866 KB2141007.

• HP 6980 printer - cannot connect wireless with the new modem/router

  
  

  You're right, that it was not easy... 4 first steps worked well and then fell on a problem with the hpsetup, because it was not on my computer.   Download drivers and software Web site, such as the drive no longer works (I have Vista Home Premium 64-bit).  Doctor of the printer does not work either... in any case it is configured now, but it took about 30 minutes to complete the configuration of the printer.

   

• Cannot connect WiFi with Linksys X 2000

  Hey,.

  I have been setting up to my router wireless Cisco X 2000 recently and I have that works well for my wired connections, however for some reason when you try to use the wireless none of our smartphones to connect, unless you use a wireless guest account.

  I tried different security settings with different passwords, but none worked (WEP, WPA, WPA2,...)

  Can someone help me on this problem? I can't imagine what could be the cause.

  Firmware version: v2.0.05

  Thank you

  Karel

  Got my live chat solution:

  P: souad steps to configure the router for cable connection:
  Step 1 - Hard reset of the router to make sure that all the previous settings would be deleted, please follow the instructions below.
  1. make sure that the device is on.
  2 press and hold the reset on the back for a minute. Use a paper clip to do the reset.
  3 unplug the unit and wait another minute.
  4. turn on the device again.

  Step 2: access the configuration page.
  1. connect the main PC to port one of the router and restart it. Connect the modem to the Internet port.
  2. start your browser (for example Internet Explorer). Type http://192.168.1.1 in the address bar, and click on GO.
  3. a login prompt will come, let the empty user name, and then type the admin password.

  Step 3 - configure the router to work with your ISP.
  1. on the Configuration tab, click the tab in MAC address clone.
  2. enable MAC address Clone and click on Mac. to Clone my PC
  3. click on the button "Save Settings".

  Step 4 - customize settings the router wireless.
  1. click on the Wireless tab and set it to manual.
  2. change the Wireless network name (SSID) 'linksys' in your name you want (example: my network).
  3. set the channel width to 20 Mhz and change the channel to 11 auto wireless.
  4. set the SSID broadcast on active.
  5. click on the button "Save Settings".

  Step 5 - secure your wireless network.
  1. click on the wireless security sub-tab right next to basic wireless settings.
  2. change the security from none to WPA2 Personal Mode.
  3. type any word in the password field for and write it down.
  4. who will be the password to connect to the wireless network.
  5. click on the button "Save Settings".

  Step 6 - Power Cycle.
  a. shut down the computer.
  b. unplug the power cable of the router followed by the modem.
  c. after 3 minutes, plug the power cord from the modem back in and wait for the power led is solid before you plug the router back in.
  d. turn on the computer as soon as the power on the router light becomes solid.
  e. check your Internet connection.

  strange thing is that I put the modem this way in the first place, but without the power reset and it didn't work.

  Thanks to Christophe P for the efforts.

  Greetings,

  Karel