Cannot add ESXi host to vCenter Server

Similar Questions

• Manage an ESXi host using vCenter Server?

  I understand it is possible and requires of the specific licenses for ESXi hosts, even if I find information on the VMWare site a bit confused as to what I need exactly. We have-

  1 License Server Standard 4 x vCenter

  4 x vSphere Enterprise license 4 (who manage our ESX 4 hosts this site)

  3 (and soon 4) remote sites that have the same server ESXi

  I would like to be able to manage ESXi host using vCenter as well, is this possible with what we have? If this isn't the case, can someone direct me as to what it takes?

  Thank you

  You need the standard by CPU socket for each host license to add to vCenter.

  You can always create a separate environment and get the Essentials Bundle (up to 3 guests max) for $500:

  http://store.VMware.com/servlet/ControllerServlet?Action=displayPage&env=base&locale=en_US&siteid=VMware&ID=ProductDetailsPage&ProductID=126843700&RESID=psfyPAoBAlkAACQ2y-kAAAAX&rests=1277824287882

  So you should have 2 vCenter servers.

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• Cannot connect esx host or vcenter server via powercli (cannot run the cmdlet Connect-VIServer)

  Dear team,

  Once I opened powercli windows, I m unablwe to connect the ESX host or vcenter server, it gives me the following error... Help, please

  

  concerning

  Mr. VMware

  Hello, MrVmware9423-

  It seems that this may have to do with the .NET Framework is installed on the computer on which you run PowerShell/PowerCLI.  Take a look at http://communities.vmware.com/message/2174319 - users have been able to solve the problem with a newer version of the .NET Framework (v2, installed v3.5 - success).

  Because your problem seem (you use a? 2 version of .NET, and you're able to install a newer version)?

• Add a 5.1 ESXI host to vcenter server 5.0

  Hi all

  I just installed an esxi5.1 host and tried to add in vcenter server 5.0 without success.

  The error is:

  A general error occurred: Timed waits vpxa to start

  Is it possible to do? If not, is documented somewhere? I searched a lot and found nothing relevant.

  The installation was made using an iso file, the new facility, in a shared, storage warehouse that has been formatted.

  I don't want vcenter server 5.1 as the impact of my infrastructure is high.

  Thanks for the help!

  VMware product interoperability matrix got the update and you would need 5.1 vCenter to manage 5.1 ESXi hosts

• Unable to add esxi for appliance Vcenter Server

  Hi all

  I am facing strange problem in my lab environment. I created two esx1 (192.168.111.130) ESX servers and esx2 (192.168.111.131) on VMware workstation that runs on Windows 7.

  I am able to connect to these esxi two servers with help of the Visual c# client.

  Now, I installed device as VM on esx1 VCenter. IP of Vcenter server appliance is 192.168.111.128

  Now, after being part of the server of the device configuration, when I connect to the device via c# client server. I am able to add esx1 but not esx2 host.

  ESX2 isn't to pings from the server to the device.

  ESX1 and esx2 are who answered the other.

  server appliance, and ESX1 esx2 are pings from my window machine on which I have installed VMware Workstation to set up this environment.

  I rebooted twice esx2 and change the IP address as well of 192.168.111.131 to 192.168.111.132, but no luck

  Any help to the above question is very appreciated.

  Thank you

  Vikrant

  Try to reduce the number of vCPU s 2 and increase the RAM to 4 GB

• Add esxi host to vCenter fails

  Hello world

  I recently installed vCenter Server. I added the first host by the name of full domain with no problems at all. I tried to add the second host and he stopped the vCenter service and I have my client I disconnected.  When I restart the service and connect through the client, the host is as disconnected displaying 7 VM 12 of offline as well. All virtual machines and on the first host are always connected without any alarm.

  This server was connected to another server vCenter, more than a month and deleted successfully, I can add. I tried to unplug and reconnect several times, restart management agents and manually uninstall the vCenter agent using the console "unsupported."

  One thing I noticed, is that it gets to 8 or 9 percent, and that's when the vCenter service is stopped. I opened a second client to watch where it stops and it is just after "Select the virtual NETWORK adapter" full show then nothing.

  Any help would be much appreciated!

  Thank you

  Ahh. There is your situation.

  Stop the virtual machine. Click on remove inventory.

  Go to your other ESXi host. Browse the data store, find the folder of the virtual machine, right-click on the VM.vmx file and add to the inventory.

  It works and're you good to go.

  Conversely when you need your choice.

• Cannot access ESXi host in Vcenter after moving to accommodate different subnet

  I moved a different host EXSi 5.5 on a new subnet at a physical site.  The host has been identified by IP not the DNS name.  After the start of Vcenter, I realized my mistake.  The host is always identified by the old IP so it appears as disconnected.  I was hoping I'd be able to simply change the identification of IP address, but have not been able to see how to do this.  I also tried to remove the host (this configuration has a data center and a host), but I can't do it.  I can't add the host (with the new IP address) I get an error message that the data store is identified with the original host.

  Is there an easy way to this?

  Welcome to the community - you need to remove the old entry in your inventory (using the command delete inventory) and then re-add the ESXi host FULL domain name.

  I also moved it to a more appropriate forum-

• Can no longer add ESXi host to vCenter but OK VI Client connects

  I removed an ESXi host in a cluster on vCenter. Now when I try to add the host (whether for the cluster or stand-alone) the add hosts Wizard appears and has the correct information, but when I cliquerai on closing, that nothing happens for a few minutes, then I get the error:

  Unable to reach the specified host... Maybe it's because this host is not available on the network, there is a problem with the network configuration or management on the host services do not react.

  However, I can connect to the host directly with the VI client and which works very well, even though the events tab displays "VFAT: 2583: Possible FAT Corruption." My copy of ESXi is on a flashdrive in a HP Blade.

  I tried to reboot the host, but it makes no difference. Several of the responses to other users of similar problems is recommended to perform "service vmware-vpxa restart" on the host, but this does not apply to ESXi. I also tried to restart the vCenter, but that makes no difference either.

  Any ideas?

  Thank you

  Will be

  Download iso hpvm-recovery on HP site and reinstall ESXi on flash drive.

  UPD: Yes, as Neil said, check your key USB HP if you bought ESXi Embedded. If you have the Green key aluminum, require the replacement of HP. And then, you definitely have to download iso that I mentioned above

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• RISKS associated with the absence of a SYS logs for newspapers and ESXi host newspapers vCenter Server

  What is the inherent risk to not configure a server of SYS logs. The sys normal newspapers configured in the data store have a maximum

  amount of storage restrictions or it develops utlize the configured size of the data store. Thank you very much for your answers.

  Locally stored logs to rotate and do not grow very big at all. I see no technical risk associated to this as filling a data store, etc.

• Adding esxi host to vcenter

  Hello

  I can't add a 5.1 ESXi host to VCenter server (5.1). When I try to add the host to vcenter, I get an error message "a general system error occurred, VMODL incompatibility between VC and ESXi."

  Need help.

  Usually this error appears when the ESXi host, you're trying to add has a newer version than vCenter.  Depending on your case, both have same version. In fact, it should work fine without any problem.

  Can you please confirm the ESXi and vCenter versions? Also can you please post numbers comes together?

• Cannot add host to vCenter server as data store is shared with an existing host to vCenter

  Recently, I removed a physical host to a virtual appliance of vCenter Server and am not able to add it to vCenter Server because I get an error message on the existing data store.  I run a simple server vCenter environment with two physical hosts and shared storage.  I've only been administering vCenter for a few months, so I'm relatively new on the technology and processes.  I searched the Internet for a few days now, but have not found documentation everyone has the same problem I have (which I find strange considering the simplicity my problem and configuration), so I tried to get help from the community of VMware.

  I received an error message a day this vCenter Server cannot connect to either of the two hosts so I removed the host (rather than disconnect and plug as I should have done).  Now, I am not able to connect to the host to vCenter server because the shared storage data store comes into conflict with the same data store used by the host in vCenter Server.  I get the error message is ' "Datastore"datastore_name"is in conflict with a store of data that exists in the data center which has the same URL (ds: / / / vmfs/volumes/UUID /), but is supported by different physical storage." "  I try to remove the host data store, but get the following error message: "resource" data store name: datastore_name VMFS uuid: UUID' is in use. ".  The error stack said: "'HostStorageSystem.UnmountVmfsVolume' call failed for object 'storage system' on ESXi"IP address"."  Cannot unmount volume ' data store name: datastore_name VMFS uuid: 'UUID' because the file system is busy. Correct the problem and retry the operation. "I tried to delete all virtual machines of the inventory, put the hosts in maintenance mode, restart physical hosts, but none of my troubleshooting contributes.

  I don't know what steps to take to get this data store driving with the host so that I can add it in vCenter Server.  You can provide me with any help is appreciated.

  Good thing you already moved the VMs on.  For what is 'disconnect', 'remove' or 'delete' might work anyway.  You should maybe put the host in maintenance mode or even reboot the host before you can remove data warehouses.  In an extreme case, I even had to remove the host and the hypervisor installed completely rebuild on the spot.  It is not that difficult or does not take long to reinstall, so be not afraid on this subject.  A clean reinstall could still save time compared to the deletion of data warehouses.

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• vCenter crashes when you add esxi hosts

  When I add an esxi host to vcenter, it crashes when it comes to installing the agent vcenter at the bottom of the screen. Then my vi client will expire and say he lost the connection. What of weird is that my vcenter is just a virtual machine sitting inside the physical esxi server, I am trying to add. My connection is both high speed broadband as well. I don't understand not for vcenter IN the esxi server, I try to add, you would think that the connection should be fairly quick. My vcenter vm using windows xp pro 32-bit.

  When you run the add in vCenter you are connected to the local ESX and vCenter through the vSphere client?  I don't think that cause this problem, but if you are connected to two, during the add, delete the vSphere client connection in the ESX and try to add it again.  In addition, if you publish newspapers at the time of failure:

  ESX

  / var/log/vmkwarning

  / var/log/VMkernel

  var

  vCenter

  Journal of vpxd

  Is this the only ESX add that causes the problem?  You can VMotion the vCenter to another ESX Server and try to add the ESX problem?

• Try to use the converter to push a VMX and VMDK existing in the environment file. Have you tried the Converter 4.3 and 5.0, continues to crash or delay. A 5.1 with ESXI 5.1 vCenter server hosts going conversion.

  Try to use the converter to push a VMX and VMDK existing in the environment file. Have you tried the Converter 4.3 and 5.0, continues to crash or delay. A 5.1 with ESXI 5.1 vCenter server hosts going conversion.

  Take a look at this article. You can try Converter standalone 5.0.1 or 5.1 beta.

  http://KB.VMware.com/kb/2033315

• Unable to add previous hosts to vCenter device

  Greetings.  We are migrating our guests to new hardware.  We had three hosts for running ESXi 5.5.0 - 1331820 with the vCenter device on one of them.  Everything worked well.  In the process of moving virtual machines around, vCenter device has been deleted (intentionally).  We recreated the device of the OVA 5.5.0.5201 vCenter and ran through the Installation Wizard as previously.

  Now, when you add one of the existing hosts to vCenter, it finds the host and displays information.  When the user clicks on finish, it works quickly up to 80% and the host appears, and then disconnects.  The log shows: add host independent, added host, unable to connect host computer in the data center; connection error host, removed in the data center.

  The error showing is: cannot communicate with the specified host (x.x.x.x). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Now the stupid thing is that we can not even add the host on which the vCenter unit is on.  In addition, all hosts and vCenter unit are on the same network of management.  There is no firewall doesn't block all ports.  I read through a lot of the display of the Knowledge Base, and most is in regards to incorrect IP addresses or ports blocked or similar.  I checked through everything and could not find anything wrong.

  
  

  Last thing is that we amazed the ESXi host that had the vCenter device on it and re-installed 5.5.0 - 1623387 ESXi (version a little more recent than before) and reinstalled the that vCenter device exactly as before.  Now we can add that the host but still cannot add other hosts.  So it appears the issue is something with the hosts and not the device vCenter. 

  
  

  Anyone have any ideas?
  

  I run in to the same kind of problems with other factors.

  FWIW, have you tried the following in this order? 1 stop the vpxa on host, 2 service. Stop the service vmware-vpxd on the vcenter server, 3. Start the vmware-vpxd on the vcenter server, 4 service. Start the serivce vpxa on the host. Then try to add.