Cannot add the header HTML - CFWebstore on CF11

Similar Questions

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• Is there a way to way to a mobile site redirection script in the header HTML in Muse? Is there a way to accsess the html header in Muse?

  Is there a way to way to a mobile site redirection script in the header HTML in Muse? Is there a way to accsess the html header in Muse?

  Best regards

  Thor Ivar

  Hello

  If you are ready to insert a script in the header of the Page header, follow these steps:

  1. in Design view, open the page or master page.

  2. go to Page > Page Properties > metadata > paste the script in "HTML for."section.

  Apart from using mobile site redirect script, you can take also relating to the possibility of creating a mobile layout in muse. Please see the links in the thread below:

  Hi, can someone help me, I did my first page in Muse, and I did just for computer, do I Tablet and phone, I have to do?  THX

  Regards

  Vivek

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• Cannot add the program to enable the WIndows firewall

  I try to install Peachtree Accounting 2011 and firewall Windows gives me a message «firewall WIndows cannot add Peachree accounting 2011»

  to the exceptions list", so I can't install the program.  I tried almost everything.  Not very technologically trained but can follow instructions well.  Thank you

  Here is a fix for this problem:

  Tweaking.com - repair Windows Firewall 2.8.8

  http://www.MajorGeeks.com/files/details/tweaking_com_repair_windows_firewall.html

  I had a customer with the same problem - cannot add programs, and the link above has solved the problem.

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Cannot minimize the header. The screen is short for this useless info.

  My other computer (with the same version of Thunderbird, but 64-bit Win7) allows me to minimize the header to be a single redundant line instead of 3 lines on my Win 7 32 bit laptop. View settings are for the normal display mode, not 'all '.
  Any ideas on how to reduce to a minimum the header, or maybe get rid of it altogether?
  Thanks for the replies!

  https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• The user interface related problem: cannot add the status buttons

  Hello

  I'm developing a screen where I need the header and status with controls like buttons and the EditFields. Please take a look at this code

  editField = new EditField();
  
        updateButton = new ButtonField("Update");
  
         cancelButton = new ButtonField("Cancel");
  
        /**        * set up Status manager       */       VerticalFieldManager statusVerManager = new VerticalFieldManager();       HorizontalFieldManager statusManager = new HorizontalFieldManager();
  
          /**        * Add fields in status manager        */       statusManager.add(editField);     statusManager.add(updateButton);      statusManager.add(cancelButton);
  
          statusVerManager.add(new SeparatorField());       statusVerManager.add(statusManager);      /**        * Set status as status manager        */       setStatus(statusVerManager);
  

  Here I can see my edit of the status field but may not see a Cancle and update buttons.

  Previously, I have tried with subLayout() for both the Manager but could not display buttons.

  Waiting for your comments on my code. Atleast help me understand what it is wrong.

  Thanks in advance people.

  Hello

  Solved the problem myself.

  Here's the summary I've done.

  1 removedStatusVerManager. In fact, it has been used only to a separator above the horizontal management of State.

  2 called sublayout inside the statusManager and delimited the height and width.

  3. called setLayOutChild() to do my fiedl edit fixed width and height.

  (I had followed procedure until 3 before I had done new is in step 4)

  4. calls the setPositionChild() method. In fact when I throw a child I have defined his position and the position of all the children who will be added in the same manager. So also set the position of other controls of BROTHER with her.

  5. Add the controls in the Manager.

  He spent setStatus. And I am able to make the desired screen.

  Thank you @ekansh for your answers.

• JDeveloper 12.2.1.0.0 do not add the header of web service security

  Hello

  I write simple WebService Java Client to a simple wsdl.

  If I click with the right button on the WSDL file and say 'Test Web Service', a request was made for me by Jdeveloper, all I have to do is click the box include the username and password for SOAP Header-> Header WS:Security and under the "security-> UserNameToken" and my request now has a security header

  " < = xmlns:env env:Envelope ' http://www.w3.org/2003/05/soap-envelope "xmlns:ns1 =" " http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "xmlns:ns2 =" " http://Oracle.apps.CTB.cdapersistence.types ">

  < env:Header >

  < ns1:Security >

  < ns1:UsernameToken >

  WebLogic < ns1:Username > < / ns1:Username >

  password < ns1:Password > < / ns1:Password >

  < / ns1:UsernameToken >

  < / ns1:Security >

  < / env:Header >

  < env:Body >

  < ns2:PersistCDADocumentRequest >

  < ns2:Document / >

  < / ns2:PersistCDADocumentRequest >

  < / env:Body >

  < / env:Envelope >

  I tried 3 separate ways to do it in my Java Web Service Proxy and all 3 have failed, the demand created by my java code does not include the security header and don't include that the < env:Header / > why are my bottom 3 attempts of creation of the grave security header down when they are means documented to supply security headers? Help, please

  Method 1:

  Map < String, Object > requestContext = (cDAPersistenceServicePortType) .getRequestContext ((BindingProvider));

  requestContext.put (BindingProvider.USERNAME_PROPERTY, "weblogic");

  requestContext.put (BindingProvider.PASSWORD_PROPERTY, "password");

  Methos 2:

  Map < String, Object > requestContext = (cDAPersistenceServicePortType) .getRequestContext ((BindingProvider));

  Map < String, List < String > > headers = new HashMap < String, List < String > > ();

  headers.put ("Username", Collections.singletonList ("weblogic"));

  headers.put ("Password", Collections.singletonList ("password"));

  requestContext.put (MessageContext.HTTP_REQUEST_HEADERS, headers);

  Methos 3:

  @Generated ("oracle JDeveloper")

  public static void setPortCredentialProviderList (map < String, Object > requestContext) bird Exception {}

  TODO - provides the required identification information values

  String username = "weblogic";

  String password = "password";

  credList.add (getUNTCredentialProvider (username, password));

  
  

  requestContext.put (WSSecurityContext.TRUST_MANAGER, new TrustManager() {}

  {public boolean certificateCallback (X509Certificate [] string, int validateErr)

  Boolean result =

  (string! = null & & chain.length > 0) & & (chain [0] (serverCert) .equals | chain [0] .equals (clientCert));

  return the result;

  Returns true;

  }

  });

  credList.add (getSAMLTrustCredentialProvider ());

  requestContext.put (WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credList);

  }

  @Generated ("oracle JDeveloper")

  public static CredentialProvider getUNTCredentialProvider (String username, String password) {}

  new return ClientUNTCredentialProvider (username.getBytes (), password.getBytes ());

  }

  @Generated ("oracle JDeveloper")

  public static CredentialProvider getSAMLTrustCredentialProvider() {}

  return new SAMLTrustCredentialProvider();

  }

  found an answer here - http://stackoverflow.com/questions/5976940/how-to-add-soap-header-in-java

• Cannot add the partition to an existing table.

  Hello

  I don't add the partition to an existing table that is not partitioned, get the error as a type of data not valid, then I'm not find syntax errors.

  ALTER TABLE MESSAGEX_XCHANGE

  ADD THE PARTITION OF RANGE (LAST_MODIFY_TIMESTAMP)

  (

  PARTITION old_data VALUES LESS THAN (To_TIMESTAMP('27/02/2014','DD/MM/YYYY')),

  You see for VALUES LESS THAN (To_TIMESTAMP('28/02/2014','DD/MM/YYYY')) of the PARTITION

  );

  Error report:

  SQL error: ORA-00902: invalid data type

  1. 00000 - "invalid data type".

  * Cause:

  * Action:

  Thank you

  Manon...

  You get this error because your edit statement has an invalid syntax. In addition, you cannot partition a table that is not already configured for partitioning!

  You have to physically re-create the partitioned table in order to add new partitions to it.

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• Cannot add the NFS share to store Cluster data

  Hello

  I have this scenario:

  Server - FREENAS with NFS share

  -cluster with 2 guests

  I added the NFS datastore successfully to each host in the cluster. The problem is when I try to add the NFS Datastore for the Cluster data store, I get the error: a specified poarameter was not correct. datastore.info.type.

  Any suggestions would be much appreciated.

  Thank you.

  Datastore1 and datastore2 data warehouses are data warehouses local? If so, you must remove these storages of data added before the NFS datatore to the cluster, first cause a cluster cannot be VMFS and NFS on the same cluster and second cause without making sense have warehouses of local data within a cluster data store.