Cannot add the song from the cd or ipod to a slideshow, asserts its copyright

Help

I am running vista, when I try to add a song to my ipod or in a slide show cd, told me impossible added that it is copyright? What should I do

You do nothing. He has protected and protected.

Tags: Windows

Similar Questions

  • I am maing a movie with windows movie maker and you cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

    I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

    I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

    ===============================
    If a music file Movie Maker crashes
    in a format that is not compatible. If you convert
    the file to the format of .wma before importing, you
    can have a better result.

    The converter below might be helpful to try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.pcfreetime.com/
    (FWIW... you can uncheck
    all the boxes on the last screen)

    After downloading and installing Format Factory...
    Open the program and choose an output folder...
    (this is where you will find your files when they are
    converted)

    Drag and drop your audio clips on the main screen...

    Select "while"WMA"/ OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck.
    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Cannot add the printer network Windows 7 64 bit

    My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

    Hello

    ·         What is the number and model of the printer that you are using?

    ·         How many computers are connected to the host computer?

    ·         You are on a domain network?

    Method 1:

    You can check the items below that explain how to install a printer in Windows 7.

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Find and install printer drivers

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    Method 2:

    a. now follow the document below to add the printer to the Windows 7 computer.

    http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

    b. If the steps above does not help try the procedure below.

    We need to change the port and check. Let us perform the steps below to install this printer and check.

    a. Click Start, click Control Panel, and double click on devices and printers.

    b. click Add a printer.

    c. Select "add a local printer.

    d. Select "create a new port". Select "Local Port" as the port type.

    e. in the "type a port name" box, type the address in the following format.

    \\[IP address of the host computer]------[the share name of the printer]

    And then click Next.

    f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

    g. complete the installation.

    For additional help, refer to the article below.

    Printer in Windows problems

    You can also check out the link below that addresses the same issue when you face:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

  • Cannot add the header HTML - CFWebstore on CF11

    Hello

    I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

    Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

    Thanks in advance for any help!

    Gary

    I found this answer:

    To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

  • get the 1726 error: cannot add the port monitor

    get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

    Could not complete the installation.

    Hi Jeff,

    The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

    Note: Do nothing until you have all of your backup data.

  • Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

    Hello. I try to add vmknic with frames in my distributed virtual switch.

    I read the vSphere command-line Interface Installation and reference Guideguide:

    "vicfg-vmknic - a-i DHCP"vmk5"

    I see the error message:

    Cannot add the vmkernel nic: a specified parameter was not correct.

    Vim.Host.VirtualNic.Specification.Ip

    What's wrong?

    I tried all the combinations of parameters with the same result.

    Ok! I've found a workaround.

    Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

    1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

    2 remove the VMKernel iSCSI/NFS to the DVS interface

    3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

    4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

    esxcfg - vmknic.pl - Server

    If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

    Enjoy!

    M

  • Cannot add the new log file for the 11g database.

    Salvation of DBA

    I'm not able to add the log file, I receive the error message when the database is added.

    SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
    alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
    *
    ERROR on line 1:
    ORA-01505: Error adding log files
    ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
    already a part of the database

    SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;

    GROUP # MEMBER STATUS
    ---------- ---------------------------------------- ----------
    1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
    1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
    /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
    /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2

    Kindly help me to add the new log file to my database.

    Thank you
    SG

    PGO

    Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

    Thank you
    Hussein

  • The registry cannot load the hive (file): \systemroot\system32\conig\software or its log or replacing. It is damaged, missing, or not accessible in writing.

    My laptop does not start all of a sudden upward - it crosses the safe mode screen, acts as if it is loading windows (display the windows screen) then becomes to empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

    I looked towards the top of the error on the Microsoft Knowledge base, and the hotfix request using the recovery disk, I.  I wonder how I can get the interactive help on laptop computer file so that I can run so that it fixes the problem... (http://support.microsoft.com/kb/307545).

    Advice, that someone could give me so that I can at least get started again windows go down all the important data before reinstalling Windows would be much appreciated.

    Thank you

    Chris

    Hey Chris,

    Thank you for visiting the Windows Xp forum

    I was wondering if you run a retail or OEM of Windows version. If you are using an OEM version of windows, you will need to use the recovery options you have from the manufacturer of your computer. If you run a commercial version, feel free to follow the article in the knowledge base you have found.

    http://support.Microsoft.com/kb/307545 how to recover a corrupted registry

    I was also wondering if you have another computer to work? If so and you feel comfortable or know someone who can remove the hard drive from the computer and connect it to another computer. You can view the disk hard kit to join. Once the hard drive is connected, you can go in my computer and copy all the files to another hard disk.

    Georgio
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Cannot add or subtract from the choice of backup discs

    I can't find how to add or subtract from the disks to use for storing upOne of my disks (3) is complete and I want to use new selecta. the preferences window is not resized

    IN aid, he said:
    «If you already set up Time Machine, your backup disks are listed, and information on each disc of the backup is displayed.» To select, add, or remove backup disks, click Select Disk or add or remove the backup disc. »

    I don't see this option in preferences:

    Simon,

    Scroll down in the window pane to display the add/remove disk backup option:

  • Cannot add a printer from the network

    Hello, in our House, we have 3 laptops and 1 pc. The 3 laptops were able to print to the printer connected to the main computer. One of the laptop crashed and it should restore it. Once restored, we added to the Working Group and tried to add a printer, but whenever we try we get a window that says: X Windows cannot connect to the printer. Access is denied. We don't know what we can do. Any help?

    Did you add the same user for the new PC you used to connect before the crash?  Are the correct printer on the PC service share permissions allows the user of the new PC? Brian Tillman [MVP-Outlook]

  • Cannot add the Flash disk

    Hello

    I came into work this morning to find one of our servers in a State that won't start plu.

    This virtual server is hosted on an ESXi 3.5.0 123629 server with two data warehouses.

    The following error occurred when trying to start the server.

    Please check that the path is valid and try again. Cannot open disk 'path to the file DEVSQL1_1 - 000001.vmdk' or one of the snapshot disks it depends on. Reason: The system cannot find the specified file.

    When you browse the data store, I could see the vmdk file.

    I learned later that the DEVSQL1_1.vmdk file has been moved to the another data store.

    Unfortunately, at this time, I removed the hard drive that was pointing to the file - 000001.vmdk if I could add a new hard disk that points the moved file from DEVSQL1_1.vmdk.

    Server started the first pop, except that the data stored on the disk problem are old.

    At this point, I stop the server and moved the DEVSQL1_1.vmdk file to its original location. Then, I removed the disc newly added and tried to add a hard drive pointing to the original DEVSQL1_1 - 000001.vmdk. When you do this I get the error "object reference is not set to an instance of an object" and I am unable to go further.

    When open the Snapshot Manager, I am unable to see relating to this disk snapshots.

    Anyone know how I can join the DEVSQL1_1 - 000001.vmdk disc in order to start the server and also have access to current data?

    Thank you very much

    Glen

    Glen - I don't think we should use this DEVSQL1 - 000001.vmdk snapshot

    I have no evidence that it has been used in the history of this virtual machine.
    It does not fit to the size of its parent disk.

    Do you remember if DEVSQL1.vmdk has been developed in the history of this virtual machine?

    Edit the vmx and change

    scsi0:0. FileName = 'DEVSQL1 - 000001.vmdk ".
    TO
    scsi0:0. FileName = "DEVSQL1.vmdk".

    It was also the State used when the machine virtual last started successfully.

    Honestly, I was a little surprised when you found this DEVSQL1 - 000001.vmdk

    You have an idea about this?

    After editing the vmx file the VM must start - when starting carefully inspect the condition = if it is out of date turn off directly.

    I doubt you'll see an out-of-date status - but if the first disk is expired I must expand the snapshot - that would be a bit strange

  • Cannot add the debit card to Apple Watch

    I discovered lately that my Apple Watch does not have to pay for Apple.  I deleted the card from my iPhone 6 and added with no problems, but when I try to add the same card to my Apple Watch, it fails with the error pop up not added card - Contact your issuer of the card for more information. Add card later or try again.  I'm with Lloyd's bank, to the United Kingdom and do not understand why it seems to work on the iPhone but not the watch.

    Try to set up Apple pay on Apple Watch as described in the article configure Apple pay on your iPad, iPhone, or Apple Watch - Apple Support

  • Windows Mail. Cannot add the domain of the sender to the blocked sender list

    Mails are received without a good 'from' address.  They now have the shape of the House of garbage.  NOTES not real names.

    I inadvisedly signed up for something the House of garbage and other offers from partner sites.  House of garbage and partner sites all start sending me waste in large quantities.  They all had one thing in common - all spam emails came rubbishionmx.com.    I had managed to block this domain by adding it to the blocked senders list.

    Now I get these emails again in my Inbox.  Any attempt to add the domain to blocked senders list fails. Probably due to no dΘcodeur address.

    What should I do now?

    You are welcome. Are you speaking of the only rule address book? Depending on the type of legitimate mail you get, some like it and some do not.

    Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

    Tools | Message rules | Mail | New.

    Box 1 - Where the From line contains people {check it out}

    Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

    You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

    Box 3 - Click on the blue words contains people

    Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

    Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

    OK your way out of the new rule.

    Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

    Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  • [SOLVED] Cannot add the Vista network printer

    Hello!

    I have a Kyocera FS1118MFP of k-x installed in a XP machine and shared with other computers.

    I installed it successfully in other XP machines, but I'm not able to do so in all Vista machines...

    I already formatted Vista.

    I have the following settings:

    -The discovery of the network: WE

    -Value private network

    -File sharing: WE

    -Public folder sharing: WE

    -Password protected: OFF

    I've run the wizard for XP network enabled file and printer sharing and then restarted.

    I put the same workgroup for Vista and then restarted.

    I don't have any of the following AVs installed:

    I.S. Norton, McAfee, Trend Micro or Kaspersky

    I downloaded the drivers from kyocera and installed on Vista and tried to add the printer again...

    Nothing seems to work. Please help me...

    Already done that it did not work...

    Found another solution but...

    The printer has an ethernet port. Connected that to the router, then install the drivers and successfully detected and installed the printer...

    SOLVED

  • Cannot add the program to enable the WIndows firewall

    I try to install Peachtree Accounting 2011 and firewall Windows gives me a message «firewall WIndows cannot add Peachree accounting 2011»

    to the exceptions list", so I can't install the program.  I tried almost everything.  Not very technologically trained but can follow instructions well.  Thank you

    Here is a fix for this problem:

    Tweaking.com - repair Windows Firewall 2.8.8

    http://www.MajorGeeks.com/files/details/tweaking_com_repair_windows_firewall.html

    I had a customer with the same problem - cannot add programs, and the link above has solved the problem.

Maybe you are looking for