Cannot be used on Windows 7 Sony bluetooth headset because the driver is missing.

Similar Questions

• Connection with Windows 10 (Bootcamp) Bluetooth headset

  I just bought the new iMac (late 2015) and installed 10 Windows using bootcamp.

  Mouse and keyboard work fine on Windows 10, but bluetooth headset gets disconnected, or sound is not clear at all.

  I matched on first 10 and then paired Windows on Mac OS.

  Mac OS works fine but not on Windows 10.

  All solutions?

  Is there a driver Apple BT in Device Manager?

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: "the patch cannot be installed by the Setup program because the program is missing" during installation and Service Pack 2 for Corel Draw X 3.

  original title: corel draw X 3 need a file to upgrade to work and will not install Windows install. I am running XP

  Windows Installer won't install Corel Draw X 3 patch for Corel SP1 and SP2.  Corel X 3 was released at the end of the 1980s, well before updates from Microsofts SP.

  These files are patches for the X 3 program and have nothing to do with Microsoft SP 1, 2 and 3.

  The error that gives the installer of windows, is that the patch cannot be installed by the installer, because the program is missing (which is not the case) or the upgrade patch may update a different version of the program, (which he did... this fix is designed especially for the X 3 only and is in fact the upgrade for him.)

  It says to check that I have the program on my computer and I have the appropriate fix. (What I'm doing.)
  NOTE:
  Last week I had to remove Corel X 3 from my computer and re-install. After that, I couldn't get the patch installed, and it needs those 2 patches to work properly.

  I am running XP Pro with MS Service pack 3 on my computer.  I have Intel pentium 4, 2944 usable Mg 300Ghz installed memory 266,80 GB of free space on 2 hard drives.

  Another site said a faulty windows installer can cause "out of memory" errors and has spent in Corel Draw so I deleted and reinstalled as I've mentioned above. Any ideas on how to get this installed?  Hope you can help, I don't know where to turn to the next if not. Corel does not support this program because of his age. I can't afford to update at the moment so I have a problem here. Any help would be much appreciated. Thank you

  Been away in a few days. Just in case anyone else has this problem, I found the answer. It's one of those moments DUHHH.

  If you use the version of Corel Draw X 3 13.0.0.739, there already = sp1 and sp2 patches and pre-installed horfix.

  Should check that the first step, but I thank you

  David Vinod to try to help this sometimes fictitious.

  Best regards, Frank

• Windows (Vista) can not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer HP laptop windows didn't load because the HAL is missing or corrupt

  I have a HP Pavilion dv6605us

  Windows Vista

  Error message I get is:

  File: \Windows\System32\hal.dll

  Status: 0xc000000f

  Info: Windows could not load because the HAL is missing or corrupt

  The changes that I do is I did a clean install of Linux deleting all partitions including the HP recovery partition.

  Now that I have to go back to Windows, I used the recovery disks that I did when I bought the laptop. It took about 24 hours to completely install, then I got this error message when you restart.

  Help, please

  Best thing to do is to nuke the drive,then reinstall Vista again.

  I know it's a long process, but you should get back to run.

  Linux makes strange recovery partitions does not understand and they are deleted correctly, boot and nuke will take care of it.

• 0xC0000221 error windows didn't load a critical system driver is missing or corrupt.

  Hey, I got a letter on my laptop to install service pack 2 for windows vista and I did it with no complications until I reset my laptop and when it came back I received an error:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\System32\drivers\ecache.sys
  Status: 0xc0000221
  Info: Windows could not load a critical system driver is missing or corrupt.

  I followed these instructions several times and made repairs to start ending telling me that "Windows cannot repair this problem automatically" and "If you recently set a device to this computer, like a camera or portable music player, remove it and then restart your computer." I have nothing connected to the computer.

  I also tried to restore the system that is not no matter how far back that I try to restore to.

  Take your laptop computer to a local computer repair shop, reputable and independent.

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  What version of the program do you use?

  What steps do you take to share your video, and what happens when you do?

  Is it only a DVD that will not be out of Premiere Elements, it or will it not exit/share any video size?

• I would love to see my idea of ISEEDS Apple. Wireless. Bluetooth headsets in the form of seeds. No more son. And the landslide simply out of the back of the phone.  They are always charged. A simple click of your thumb to the rear and an iseed flicks or

  I would love to see my idea of ISEEDS Apple. Wireless. Bluetooth headsets in the form of seeds. No more son. And they simply slide to the back of the phone.  They are always charged. A simple click of your thumb at the back and an iseed movies out. And an Apple healthy seeds

  Garry Graham

  Please you not to Apple here. This is a user forum. You can share your comments with a Apple. They will not respond, but at least they'll know your suggestion.

  http://www.Apple.com/feedback/

• How to get the code produced for my Windows XP disc if I have the drive?

  Acquisition of Product Code Windows XP

  How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  Paid (free demo is available): Recover Keys: http://recover-keys.com/
  "quickly scans your system for more than 3000 + software '.
  and produces a list of software activation keys.

  13 keyfinder programs:
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  J W Stuart: http://www.pagestart.com

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• Updating my windows... Problems with the driver AMD/ATI.

  Updating my windows... Problems with the driver AMD/ATI.

  PLEASE NOTIFY

  Original title: AMD/ATI driver

  Hi Amanda,.

  1. What is the exact issue that you are facing?

  2. What is the brand and model of the computer?

  3. that you get an error while trying to install updates?

  4. don't you make changes to the computer before this problem?

  If you have a hardware device that does not properly with your computer, you probably need a driver updated.

  Update a hardware driver that is not working properly:'t-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-in/windows/update-driver-hardware-isn

  Thank you.

• Receive error message of this serial key cannot be used for Windows 7

  So bought windows 7 and is going to use it on my new computer but I just continue to get a message that my serial key cannot be used. I know that my brothers computer is running the same key, but I remember hearing somewhere that you can do both computers on the standard windows 7 licenses. How can I fix it?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Amazon promotional card cannot be used on Windows 8.0

  I bought a computer with Amazon that has windows 8.0.  Included with the purchase was a promotional credit to $25,00 for the Windows store.

  I bought an App and applied to my credit card.   I contacted the store windows by live chat and was told that the promotional card could only be used with windows

  Is this true?  Is there a way I can use the credit without upgrading to windows 8.1.

  I did the upgrade to 8.1 but he caused problems with my computer. Especially, it's unusable Bluetooth.  So, I went back to 8.0. I understand that this is a common problem.

  Maybe it's the two question. Can I switch to 8.1 without compromising the Bluetooth.

  If the credit is usable only on Windows 8.1 Microsoft has a long way to go as a reseller of the application.    I should be able to go to the standard website and use it.

  Assistance to the card.

  And assistance to upgrade and Bluetooth.

  Hello

  This promotional card option has been included at the launch of Windows 8.1. You must upgrade to Windows 8.1 to use the promotional card to buy apps on Windows Store. I suggest you refer to the following article from Microsoft Help for more information on this subject.

  http://Windows.Microsoft.com/en-us/Windows-8/redeem-gift-card

  On the question of Bluettoth , such problems can cause if there is a compatible driver for the hardware.

  I suggest to download drivers Bluetooth of the website of the manufacturer of the computer and then try to install in compatibility mode and check if it works for you.

  Step 1: download drivers Bluetooth of the website of the manufacturer of the computer.

  Step 2: install the Bluetooth driver in compatibility mode.

  Follow the steps to install the driver in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.

  b. check the run this program in compatibility mode for: box.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  d. try to install the driver and verify.

  Please do not hesitate to visit our Web site for any help with the Windows operating system.