Cannot boot from CD - DVD in LEGACY mode - NO Secure Boot UEFI NOT

Similar Questions

• every time I try to load it from the DVD the error appears as: "the application could not be started because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Original title: SPWIZENG.dll

  Hi, I got a cd of Windows 7 from my friend who is a software engineer so he gets all the programs (operating systems). It burned in a DVD instead of CD. So, every time I try to load from the DVD the error appears as:

  «The application failed to start because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Then when I click ok, it says:

  The file 'Autorun.dll' could not be loaded or is corrupt. Setup cannot continue.

  Help, please. I'm not good with computers and I honestly don't know what to do.

  Thanks in advance,

  :)

  Hello

  Are you able to play or open other CD or DVD?

  Step 1: These error messages may be due to corrupted media. Try to use the same media on another computer and check if you are able to use it.

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-upgrade-windows-7-error-code-0x7e/b1bfbe8f-7980-4847-a186-2206e87c6bc4

• my computer does that in safe mode, it does not start in normal mode, my Security Center opens not or my updates of the widow.

  Hello

  my computer has stopped working on normal mode. I have to use my computer on safe mode.

  My Security Center lights.

  Windows dates won't turn on.

  I think having a consistency of disk.

  Can someone help me?

  Hello

  1. what exactly happens when you try to start in normal mode?

  2. do you receive any error messages?

  3. don't you make changes to the computer until the problem occurred?

   

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore.

  Method 2: Perform a clean boot in safe mode

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

   

• Cannot boot from disc or USB on Ideapad Z710

  I try to install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can not even my laptop to boot from an external support. InsydeH20 Setup utility, I have so far disabled Secure Boot, set the boot in UEFI, compatible USB Boot, Mode a PXE on LAN boot enabled and set my EFI boot to the EFI network order) 1 0 for IPv4, network EFI 2) 0 for IPv6, then (3) no other options) Windows Boot Manager. I'm not actually trying to boot from a network, I want to just start from the built-in DVD player or my DVD USB drive. When I boot with these settings, I get the error: network EFI 0 for IPv4 (...) initialization failed, and a similar one for IPv6, then it starts with Windows. Why I can't boot from DVD or USB?

  Another thing I tried is affecting Boot Legacy Support and Boot Priority to first legacy Mode (with Secure Boot disabled) which translates my computer laptop startup in directly to Windows even when ODD USB appears first in the boot order.

  Please tell me how to start on a Linux DVD or a USB on this machine! It's a major purchase for me, and if I can't install Linux on it, this laptop is completely useless for me. Please answer.

  Try this:

  1. fix the disabled startup.

  2. set start on Legacy Support Mode.

  3. start first priority inheritance

  4 Save and exit.

  5. stop computer.

  6. Insert your usb pendrive.

  7. press on Novo.

  8. Select the Boot menu

  9 select your USB key, and then press ENTER.

  Note: USB Boot must be enabled.

• Boot from USB DVD on Lenovo X121e

  Hi, any idea how to boot from a recovery disk from Lenovo for Windows 7 on a USB stick on DVD player? The laptop is running cannot run from the Linux operating system. The BIOS utility does not recognize the drive no matter what I select in the start menu (USB, CD, USB FDD or USB HDD) and the F12 boot utility also does not recognize the drive. Incidentally, F12 recognizes the Linux USB drive so I know it works. The external drive is a Leicke DVD R/RW DVD.

  The reason for wanting to boot from the Windows 7 recovery drive is to reinstall Win 7 on a new installation, dual boot Linux (Mint), and then install iTunes on WIn 7so I can sync to my iPhone and run everything in Linux. I tried to use an emulator under Linux but unsucessfully Win.

  I noticed that this question was asked IO a few years by another Member, but no resolution. Thanks, Nik

  Hello

  in order to perform a recovery of the factory of the Lenovo image BIOS Setup menu settings should be:
  -"Boot UEFI/Legacy"-> "both".
  -"UEFI/Legacy Boot Priority"-> "Legacy first.

  Select CD USB as a bootable drive.

• Satellite C70D - how to start from the DVD

  Hello
  You just bought a Satellite C70D with Win 8.1. Everything works (as much as I know to knowledge), except start it from the DVD. I disabled the Secure Boot in the bios and changed the boot order on a DVD first, then USB and HARD drive. The DVD player starts, but then it jumps on the HARD disk and Windows is started. First time I tried there was a message like "DVD boot not supported" or something like that.
  The DVD is bootable, so it's not the problem.
  I want to install Linux Mint alongside Windows.
  Someone has already solved this problem?

  Update: changing of UEFI CMS in the Advanced BIOS tab at the start of the DVD, but Windows no longer starts. Is it possible to boot from DVDE and still be able to start Windows as well?

• Windows XP cannot connect to DSL Wireless Modem - locked mode "Acquiring Network Address", never connects. Broadcom wireless card

  I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.

  When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.

  The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).

  I am told that it worked (I can't confirm this, as the player crashed when I got it).

  Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.

  Thanks in advance!

  How do you reinstall Windows?

  If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well.  If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.

  If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.

  However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.

  The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.

  The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  Click the Wireless Networks (see screenshot)
  If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
  Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
  OK your way out
  Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.

  If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.

  If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).

• V3 - 771g S8 i7. V2.28 BIOS how to disable secure boot mode and allow to boot from usb/dvd

  Hi people,

  Recently my laptop w8 shared with my brother get sick. So I decided to get out the trusty old diagnosis

  USB and dvd, you know, ubcd centos ophrack. Much to my dismay, I couldn't start any of them. So after some faffing

  everything on the net, I was able to boot/secure boot / disabled, which meant I could f12 at startup in the Boot Manager.

  Unfortunately, the drama is over. Kindly listed boot manager internal hard drive, but not bootable usb or dvd connected.  so I thought, I'm going to be cunning and change the boot order of start. Yet once the monster of Bios Acer jeeringly laughed at my attempts to

  take control of the material, I dared try control simply because I happened to pay a substantial amount of money to acer.

  So, it seems, the only option I have left to change is boot/boot mode / (boot uefi/legacy). So what I need to change to restore the boot control, is to change legacy BIOS uefi? Who will install the w8 cack?

  Also what happens if I want to replace the hard drive with an ssd in the near future, is not not to work?

  Oh, I tried to get help from the enamel of acer, their response said essentially bios/uefi is isn't a problem acer because it is sw and realized

  What seemed like a pay per minute service.

  Skills of good customer Acer.

  Any help appreciated,

  Hello..

• ProDesk G2 SFF 600 HP: HP ProDesk 600 G2 LTS cannot boot from USB or DVD

  We have 50 HP ProDesk 600 G2 SFF pcs and we need to install Windows 7.i can't boot from usb or DV.

  Please can someone advice me what to do?

  Thank you.

  Hello:

  We must go into the BIOS, turn on legacy mode and disable secure boot to install W7.

  Then you must also run this tool to set the USB3 drivers in your W7 usb flash drive.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• Qosmio E10-102 - cannot boot from CD/DVD

  Hello

  I have a laptop Qosmio E10-102 here. The hard drive is missing and I need to install the operating system on a new hard drive but I can't boot from CD/DVD. After the start of Qosmio screen, it shows "insert system disk in drive. Press any key when ready... ».

  When I press F1, I get the 1.5 version of BIOS ACPI boot menu, but I can't change date, time and the password. The boot priority is HDD-> FDD-> CD and I can't change it. The manual says to hold F12 during initialization, but this has no effect. Even by pressing the 'c' key, the disc does not start.

  I tried to put the hard drive in a laptop and install there, but detects the Windows installation disc, that's not Toshiba laptop.

  No idea how to fix?

  Hi Napto,

  The CD/DVD drive is correctly listed in the BIOS? You see the model number of your player? Usually, this should be possible

  And what installation disc, you are starting? You use Microsoft disc or Toshiba Recovery disk?
  Maybe the current disc is scratched

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• Satellite L70-A-13F - cannot boot from CD/DVD

  I have the Satellite L70-A-13F.
  64-bit Windows of 8.1.

  I changed the BIOS or / and settings of TOSHIBA Notebook for START of the CD/DVD.
  But my notebook does not start from CD/DVD. It always starts the HD.

  I have an application that build the HD Image for backup. for example. Active disk image.
  Program needs to start from the CD/DVD to restore the image. But the laptop does not start from CD/DVD.

  Program manufacturer said that to change the UEFI BIOS settings. But I see no UEFI settings on my laptop BIOS...

  Would you please tellme how can I boot my laptop CD/DVD.

  Rgds
  Nevzat

  Hello

  Here is a useful document of Toshiba on this subject - http://aps2.toshiba-tro.de/kb0/TSB2B03F30002R01.htm
  At your startup secure machine option in the BIOS settings?

• Satellite L - cannot boot from CD/DVD

  Hello

  I have the following problem u.z. I can't boot from CD if I laptop. Restart, and then press F12 I only at the option of the hard disk and lan, cd player, it doesn't don't show me.
  In the bios if I go to the Starter Strip, it shows me first second hdd 3rd disc lan, but before the name of the drive, it has an exclamation point because I can't change anything.

  Currently using toshiba windows 7 which I had with the laptop and I now want to install another windows 7 because I share with Windows Toshiba it can't erase me the whole plate.

  Help, please

  Hey Buddy,

  Your ad is a little hard to understand, but if t can boot from CD/DVD and the drive does not appear in the BIOS, it seems to be faulty and needs replacing I think
  Usually, there is nothing of what you can do to get rid of this.

  I put t know which model of laptop you have, but I would like to contact an authorized service provider and explain the situation. Guys can you help to swap the drive. :)

• Cannot install the boot from the DVD - OEM of Windows 7 (full)

  Generally, I am able to reset the priority of readers, so a computer will boot from a DVD.  It's my first time on Win7 and I can't make it work.  Insert the disc in Windows (XP currently installed - 'not real') indicates the drive is not compatible with this version of Windows.  I thought that booting from the DVD would help, but I'm prompted to "press any key to boot from the CD/DVD" and every time he ignores me and goes backward to boot from the XP/hard drive.

  At this point, I tried to affect the CD/DVD drive that all the priorities, not only the first condition.  I tried to use the other DVD player because there is another - still no luck.  Isn't this updated software in place to work this way?  It should be bootable, no?

  Thanks for any help...

  Here's a question I would ask. Your computer is 64-bit compatible? If it isn't, it's probably one of the reasons why you would receive this error message. Please run the Windows Upgrade Advisor to see if your computer is ready for 64-bit.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• under win8.1, how to boot from a dvd using UEFI on a hp 700-109 c desire?

  I installed a Kingston ssd 120 GB in the 700-109 c and you want to use clone drive ACRONIS to reduce proportionally the 2T dirve to the win8.1 120 GB and boot from there.  I can't activate the legacy in BIOS support because the software warns UEFI to boot from the disk of destination after the migration, must be enabled before we start the cloning process.   However, I am not able to boot from the dvd Kingston (ACRONIS) with secure boot UEFI active.  How do I proceed?

  Hello

  Cloning of the HD under Windows 8 is sometimes problematic. You must disable Secure Boot and turn on legacy mode. Your PC should reboot. I can boot Windows 8 as well in Legacy and UEFI mode with my HP laptop that the use of Windows 8.

  As a side note, usually with UEFI, you will need to insert the CD, and then the PC power cycle for UEFI to recognize an eligible UEFI device such as a CD or USB flash.

  A problem you will encounter is that the bootloader of Windows 8 will demonstrate to the sata hard drive after the clone so it does not start. Another possible cause is that the HP recovery partition is not going to work. Don't forget that you have a set of HP recovery or USB flash drives.

  Paragon makes one a great migration and cloning for windows8 utility which also contains a boot corrector function to manage the windows bootloader question. It is 8.1 compatible window is available for $12.   There is even a video available.