Cannot burn DVD get a 0XC0AA0301 error code

Similar Questions

• I get an 0XC0AA0301 error code when burning DVDs...

  I get an 0XC0AA0301 error code when burning DVDs...

  Hi mohamed,.

  Thank you for visiting the community Microsoft Windows 7.  This message provides troubleshooting steps about the error you received when you try to burn DVDs.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm having problems trying to watch a dvd, I get the C00D116A error code what can I do to solve the problem?

  I can't play a dvd I get an C00D116A error code.

  Hello

  C00D116A
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D116A&ContextId=10&OriginalID=C00D0FAA

  If XP, Vista, Windows 7 or Windows 8 error usually means that duty to update
  the video driver.

  Check with support of the manufacturer of the system (motherboard for custom systems manufacturer) updates
  the video device and/or the manufacturer of the real video device like ATI, Nvidia or Intel.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I try to play a DVD through Windows Live Photo Gallery, I get an Ox80010108 error code

  Original title: compatibility programs Application Applications App Apps game games Legacy Crash crashes Hang hangs

  When I try to play a dvd through Windows live photo gallery, I get an Ox80010108 error code. What does that mean.

  Hi DonWright,
   
  Follow the steps as shown in the link given below and check if it helps to fix the problem:
   
  Code 0x8007007e error and 0 x 80010108 when double clicking on a photo for editing in photogal
   
  If this does not help, post your request in the Photo Gallery Forums for assistance on this issue.

• Cannot burn DVD in Windows DVD Maker

  Hello

  I'm burning a couple of files wmv to a DVD. The two files together last about 5 minutes on a 120 minute DVD - RW. When I open Windows DVD Maker and import the two files, DVD Maker goes through the burning process, but towards the end DVD Maker informs me that he cannot finish burning "an error has occurred." It does not say what error or what caused it. DVD Maker itself I unchecked the filters in 'compatibility '; in the Windows Event Viewer, I can see the following:

  DVD Maker returned an error code (0xC00D002F) when burning the disc.

  Dvd creation engine returned an error (-1072889809) code when burning the disc.

  When I check the events and the center of Microsoft's messages for the two error messages, I 'been found no results for your query.

  How could I solve this problem please?

  Thank you.

  Blue

  Hello I volunteer

  Thanks a lot for your answer and the link of the encoder.

  I got the encoder to work and 15 tracks (wmv) audio/video tracks I wanted to burn it to a DVD using DVD Maker, some 12 are corrupt. I don't know how they have corrupted or why, but there you are.

  The strange thing is that if I use another burning program, I can play tracks perfectly - a drawback is that with other software, you can not burn the tracks in the order you want (they appear on the final DVD burned by alphabetical order), whereas the DVD Maker, you can organize tracks by using the Up/arrow keys.

  I have not tried to burn on a DVD so I'll post back.

  Thanks again.

  Blue

  ==================================
  If the only problem with your other programs is the
  order of files... try their numbering.

  (10001) .wmv
  (10002) .wmv
  (10003) .wmv

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to save the family settings, error: the system cannot find the specified file 80070002 error code.

  Original title: Family Safety filter configuration problem.

  Hello.

  I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

  When I click Save I get this

  The system cannot find the specified file 80070002 error code.

  I've tried everything.  Uninstall, reinstall Windows Essentials 2012.  First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials 2011.  No change.

  Help, please.  I appreciate it.

  Thank you

  GISIGER

  Hi Greg,.

  Thanks for the reply.

  Run the System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Also reset Windows update components and check if this solves the problem.

  Refer to this link:

  http://support.Microsoft.com/kb/971058

   

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us informed on the status of the issue.

• Windows Firewall cannot change some of your settings/error code ox80070424

  I get this message "windows firewall cannot change some of your settings/error code ox80070424.

  In a little more detail can help, like when is the message that appears and what OS you have (W7 starter Edition-home premium 32 bit 64 bit etc.). When the message started to appear? either you have installed a program or had a malware attack? (If you have or suspect that you may have been attacked by malicious software, then download, install, update and run a scan with Malwarebytesfree)

  This can be interesting to read - http://support.microsoft.com/kb/968002 not quite the same message, but the same error code, i.e. at least the fixit FW.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Windows Update fails to run and get the C800044E error code

  Windows Update does not check the updates and I get the C800044E error code.  So far, thi is what I did:

  Get the C800044E error code when you try to run Windows Update.  Tried Mr. FixIt, who did not work and tried to do what does not work also:

  Please, try the following suggestions to see if the problem can be solved:

  1. click on Start, type notepad in the start search box and press ENTER.

  2 copy and paste (or type) the following command lines in the Notepad window:

  net stop wuauserv

  CD %systemroot%\SoftwareDistribution

  Ren Download.old download

  net start wuauserv

  3. on the file menu, click on record under and type Rename.bat .

  4. click on save as type and then click on all files (*. *) .

  5. save the Rename.bat file to your desktop.

  6. right click on the Rename.bat file, and then click run as administrator .  If you are prompted for an administrator password or for confirmation, type the password, or click continue . It renames the download folder.

  7. try to install the updates again.

  8. If the problem is resolved, delete the Rename.bat file that you created in the previous steps.

  any other ideas?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Is this a sudden, new problem?

  Are you having difficulty he run in http://support.microsoft.com/default.aspx/kb/971058 and don't you run it in default and aggressive modes?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• Cannot install 2 important updates - unknown error: Code 80070026 and Code 26

  For months now, I have tried to run updates for Vista Windows, but I get these two error codes. I thought I might have a virus that my antivirus regularly had not taken, I went to http://onecare.live.com/site/en-us/center/whatsnew.htm and performed a full scan. There are several issues, but they have been resolved. However, I can not always install updates and I get the same error codes. Any help?

  Hi Sylvirblu,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Please let us know about the updates are available for download and the failure with the error code 80070026.

  I will suggest that you turn off the Antivirus software that is running on the computer and put the computer in a clean boot environment and then try to run the Windows updates, as in this case seems to be a conflict of third party software.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your problem is resolved, follow the procedure to determine what is causing the problem section in KB article to narrow down the exact source: http://support.microsoft.com/kb/331796
  In addition, refer to the section on how to restore your computer to a Normal startup mode

  Please let us know if it helps.

  Thank you and best regards,
  David

• I get a 0xD0000006 error code when tring to use windows update

  I get a 0xD0000006 error Code when you use the default of windows update Setup

  d0000006

  Code: Error_Invalid_Handle - a possibility - bad hard drive

  Maybe a problem with a hard disk - important files may appear on the bad blocks.

  Try to run the "chkdsk/r" command at the command prompt

  You must open the command prompt by typing "cmd" in the start menu-> Run

  TaurArian [MVP] 2005-2010 - Update Services