Cannot burn DVD + R double layer in CS5.5

Similar Questions

• Portege R600 - fits compatible discs DVD player double layer?

  Care of the Australian for the * R600 PPR61A * state that contains the unti: * DVD SuperMulti Double Layer (7mm) *.
  However, the R600 does not recognize blank DVD discs dual layer using either Windows tools burn as well as Toshiba Disc Creator.

  Is this an error in the card (which is completely misleading), or do I have driver/configuration problem?

  Australian sheet is available here: http://203.56.127.51/%2fTOPIC%2fproduct_details%2fproduct%2f20090325%2f Toshiba_PortegeR600_PPR61A - 00300R_Specification_Brochure_Mar09.PDF

  Hello

  As far as I know that the same notebook can be equipped with different sides.
  So it is possible that the R600 was equipped with the STRANGE that doesn't support DL media.

  However, I would recommend checking if the STRANGE can handle DL disks.
  For example, you can use a burning software like Nero to find out which discs are supported.
  I use Nero and this software contains various options. One of the options provides details about the STRANGE House.

• Unable to add data to the Virgin DVD + RW double layer after having ejected backup problem.

  Did a backup using DVD + R double layer, and after having ejected the last media due to clerical error, I can no longer continue the backup due to the error: insert a disc - it seems that my hardware is no longer detect dual layer blank media. Works great on regular blank media 4.7 GB.

  Hi sal69,

  This problem is caused by physical limitations in DL (Double Layer) media. These limitations prevent any real use multisession. When the media is ejected, the disc session may be closed for DVD-ROM compatibility. On these discs, DVD-ROM compatibility is achieved only when the disc is complete. When the disc is finished, it is closed forever. The physical characteristics of the media require two layers will be burned so that the disc can be played in a DVD player. The two layers can be burned only by closing the disc. As soon as the disc is closed, no additional data can be added to him.

  You can follow the steps mentioned in the link below

  You may be unable to save more data on a DVD-R DL disc or a DVD + R DL disc after it is ejected into Windows Vista

  http://support.Microsoft.com/kb/928355

  You can download and install the latest service pack on the computer

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• M60-182: can it read/write DVD-R double layer?

  I couldn't find any list of the supported media types in the specs, the model of dvd player is mast * a dvd - ram uj-840 years

  To drive specifications, it should be possible to write on DVD + R double layer 2.4 x max
  Usually, you should find a tested and compatible media information in the user manual which must be preinstalled on your laptop.

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• New DVD - RW double layer burner on Satellite 2450-S203 (IDE 1 # ERROR)

  Hi all

  I have a toshiba 2450 S203.
  For this laptop, I bought a new writer NEC ND-6650 double layer DVD.
  I took out the orginal, unscrewed the chassis power off and place it on the new. Insert the new DVD burner in my computer, the led starts too burn. Insert a cd in there and nothing happened. Looked in my computer and the DVD player was not shown. Restart my computer and I got an erro: IDE 1 # ERROR. Can someone help me with this problem.

  Thanks in advance,

  Daniel

  Hello Niko

  Is it possible to make it work properly? My Tecra M1 has a CD burner. I wish I had a DVD burner inside.

  Thank you.

• Satellite A300 - cannot burn DVDs dual layer

  Hi, I bought my laptop 10 months ago.

  Since then I ve been burning a disc or two every now and then, no intense use of the driver.

  Last week I tried to burn a DVD double layer, my driver seems not to be able to burn a. I used BurnXP free burning software that supports double layer and when he finished the first layer of the program collapsed in response, I have tried 2-3 disk, none worked.
  Then I tried the latest version of Nero, everything seemed smooth (it burned down two layers) up until the finished burning process and then I got an error message that the procedure has failed.

  I have tried different brands of disc 'TDK' 'Philips' "In extenso" or something. None worked.
  I tried a Philips disc on my desktop drive and it it burned very well.
  -Should I head to Toshiba service?
  -Are there a driver/firmware to fix my problem?

  PS: I tried to update firmware but can't find a firmware for my drive.
  I have the ' matsita DVD-RAM uj-850 s and I used the right type of DVD discs--
  Type in advance.

  > So I tried the latest version of Nero, everything seemed smooth (it burned down two layers) up until the finished burning process and then I got an error message that the procedure has failed.
  You have received this message, but have you checked the DVD DL after that?
  Perhaps the data has been burned correctly?

  I got a lot of time, the message that the burning procedure was not successful, but I then tested the disc and it was legible.

  AFAIK that should the user manual contains also some info on drive tested and compatible.
  Maybe you should use the DVD DL recommended in this user's manual.

  But of course this could be also a material IRREGULAR deadlines.
  In this case, you must request the ASP for the test and check!

• What IS THE DVD BURNER DH 16ABLH double layer compatible

  I want to know if the DVD on my computer is compatible to playback and burning double layer?

  Hello

  It should be, but to verify, you can visualize all the multimedia capabilities of your optical drive using the free app at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• Material of DVD and DVD - RW double layer

  I currently have the equipment following in my computer to read and burn the DVD.
  1.) HL-DT-ST DVD +-RW GSA-H73N ATA Device
  2.) TSSTCORP CDRWDVD TS-H493B ATA Device

  This material will allow me to burn it to a DVD + R DL (dual layer DVD 8 GB)?

  Thank you
  KJFK

  Hello

  Specifications: HLDS GSA - H73N drive Drive User Guide - specs say it will be
  http://support.euro.Dell.com/support/eDOCS/storage/P153464/en/specs.htm

  Specifications: TSST TS-H493B CD-RW/DVD-ROM Drive User Guide - will be read/read but not write double layer
  http://support.euro.Dell.com/support/eDOCS/storage/P135764/en/spec.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Qosmio E10: The drive only reads DVD-R double layer / DVD + R

  Hey all,.
  I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
  He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
  This disc, Mat * a UJ - 830 s equips the Qosmio E10.
  I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.

  There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
  Thanks for reading.

  Alcahest

  Hello

  AFAIK this unit has a DVD Super Multi drive and it must use media suite:
  CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
  DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)

  In addition, these speeds are available:
  Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
  DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)

  Maybe this drive can t use the double layer? I think he uses a normal DVD

  Good bye

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Satellite Pro L650 - ODD cannot burn DVDs

  I can't burn DVDs. That is to say to ensure that I have the latest firmware I checked and do but still does not work please help

  Can you please tell us which laptop model you have and what operating system are you using?
  Your optical disc drive can read the DVD?
  What burning software do you use?

• Cannot burn DVD-R with my Satellite P100-342

  I bought a Satellite P100-342 two years ago. Some time after I tried to burn DVD + R and it was impossible, so I sent it to Toshiba. A few weeks later, when they returned to my laptop I saw that I can burn DVD + R, but it was not possible to burn a DVD-R.

  I tried with many manufacturers of DVD - R, but no one works.

  I checked my DVD multi recorder (HL-DT-ST-DVD RAM GMA-408N) with Nero Info Tools and it checks ON items: DVD + R and DVD-R. It shows that system ASPI are not installed and I don't know if that's the problem.

  My OS is Windows MCE.

  Will you help me, please?

  Hello!

  This DVD did you tested on your laptop?

  I use discs Verbatim always and never had any problems with it. You may also try verbatim and post workout.

  Good bye