Cannot burn DVDs or publish on computer for 'home movie' Director / window Vista

Hello

I try to publish to the computer for home movie maker Vista zipper theater. publish 52% then pop error I also try many time to burn movie to DVD only 39% is stop and pop up error. Please help thank you very much

Hello

·         What is the full error message?

I suggest you follow the steps mentioned in the article below.

Publish a movie in Windows Movie Maker

http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

Also refer to:

Solve problems with publishing a movie to a recordable CD

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD

Also try to change the audio filters off and check see the link below:

http://Windows.Microsoft.com/en-us/Windows-Vista/vid, eo-filters-in-Windows-Movie-Maker-frequently-asked-questions

Thanks and regards.

Tags: Windows

Similar Questions

  • Program for creating Windows DVD cannot burn DVDs

    Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

    Hello

    (1) have you made changes before the start of this issue?

    (2) you have the external devices connected to the computer?

    (3) what is the exact full error message?

    (4) is specific to the program the issue?

    Method 1: Clean boot

    How to set up Windows 7 to start in a "clean boot" State

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

    For reference:

    DVD-video burning: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

    I hope this helps.

  • Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

    MODEL: SA80-129
    DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
    SYSTEM: WINXP
    SOFTWARE: NERO

    (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
    (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

    all PROMTLY ANSWER would BE MUCH APPRECIATED.

    It doesn't sound good.
    I had a similar problem of combustion and the end of the story, I replaced the drive ;(
    However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
    Then you could check if it able to burn the DVD s s.
    I think you should also try burning different DVD media.

    I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
    This could be a worst case and in this case, the replacement is necessary.

  • Cannot burn DVDs on my Satellite C660

    I just bought a new complete Satellite C660 and I cannot burn DVDs.

    Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
    When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

    You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

    Have you tried using different media of high quality as TDK or Verbatim?

    Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

  • Where can I get a link for a copy of windows vista Service Pack 1 support only computer

    I had to reformat my hard drive of the computer.  I am running Windows Vista Home Premium and try to update to Windows 7 Home Premium.  I saved my files for a western digital 500 gig external hard drive that does not load the drivers in Windows Vista and do not see my drive on my computer to transfer my saved files.  All the files that I see in microsoft tell me how to load sp1 but do not include a link to get the update for service pack 1-vista 32

    Windows Vista Service Pack 1 (SP1) - 434.5 MB
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
    Windows6. 0-KB936330-X 86 - wave0.exe

    Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
    Windows6. 0-KB936330-X 64 - wave0.exe

    Windows Vista Service Pack 1 - language standalone DVD ISO
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
    6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB

    Important: things to know before you download Windows Vista SP1
    http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    added-

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

    Information about Service Pack 2 for Windows Vista and Windows Server 2008
    http://support.Microsoft.com/kb/948465

    Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

    How to get the latest Vista Service Pack
    http://support.Microsoft.com/kb/935791

  • I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to open a session.

    I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!

    original title: help!

    If you have no Windows CD, you can not do a repair installation.

    If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.

    If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).

    Wouldn't you want some ideas that actually work?

    The error:

    STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000

    indicates a problem with your NTFS file system.  You can usually solve this by running chkdsk/r from the XP Recovery Console.

    The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

    These can cause corruption in the file system that must be fixed before you do anything else.

    If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

    Here's how:

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options. I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.

    problem reinstalling windows Vista operating system.

    I'm trying to reinstall the windows Vista operating system.  When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options.  I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.  How can I solve this problem.  Thanks in advance for your support.  Valerie SG

    Why you want to reinstall your PC? It could be that you don't need to reinstall Windows, and solutions you could solve, which is recommended.

    However, if you want to reinstall your Windows, it's NOT F8, F8 key belongs to Windows and he'll fix the problems. To reinstall Windows, you must use differently for Dell steps:

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_347576&isLegacy=true

    And for more details, you could visit the Dell Web site and search for your model and find the method to do this, or contact technical support:

    http://support.Dell.com/

  • My computer has been infected with "Windows Vista restore" what should I do to get rid of him?

    The fake security program Window Vista restore"scans my computer and tells me I have several hard drive errors.  It has blocked access to my computers system restore and defragment utility, appeared to 'clear' all my files (like images taxes) and I get the error pop ups telling me to turn off the computer because "hard drive failures.  When I click on cancel, x or anywhere on the box, the system stops.   When I restart, the same fake program starts begins to scan my computer again.  I tried running my Trend Antivirus scan and when the scan is about 99% complete, the fake program does not scan continue.  What should I do to get rid of him?  I'm asked to pay for an upgrade of the software, but have not entered my card number.  I'm afraid that my data has been hacked... including the loss of my photo albums.  I'm currently installing updates to windows on the computer.  Will he get rid of it?

    Hello

    do you mean Windows Recovery?

    read this:

    Windows Vista Recovery is a program of analysis and optimization of fake computer that displays false information in order to scare you into believing that there is a problem with your computer. Recovery of Windows Vista is installed via Trojan horses that display fake error messages and warnings of security on the infected computer. These messages will state that there is something wrong with the hard drive of your computer, and then suggests that you download and install a program that can solve the problem. When you click on these alerts, recovery of Windows Vista will be automatically downloaded and installed on your computer.

    Once installed, Windows Vista Recovery will be configured to start automatically when you log in to Windows. Once started, several error messages appear when you try to launch programs or delete files. Windows Vista Recovery will then prompt you to scan your computer, which will then find a variety of errors, he said, he can't fix until you purchase the program. When you use the defragmentation tool called it will specify that it should run in Mode safe and show then a background in Mode Safe false who pretended to defragment your computer. As this program is a scam do not be scared by buying the program when you see its alerts.

    Follow the removal instructions, including how to "unmask" your data

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-Vista-recovery

  • When does support for the end of windows vista Home premium

    When does support for the end of windows vista Home premium

    Original title: support

    Watch the news of Vista on this page:

    http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  • need to know which driver download for dell 1525, or windows vista basic

    need to know which driver download for dell 1525, or windows vista basic

    Dell Inspiron 1525 drivers: http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=

    Choose your operating system from the drop-down list.

    J W Stuart: http://www.pagestart.com

  • How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

    How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

    See if a program was installed for him. Or use something like Skype / instant messaging program

  • Is there an update for tools RSAT on Windows Vista x 64?

    I am trying to administer remote Windows Server 2008R2 EE x 64 for a my laptop Windows Vista x 64 Failover Cluster. While trying to add a server to a cluster, I get the message:

    "This feature is only supported with Windows Server 2008, Enterprise Edition, and Datacenter Edition servers."

    I initially installed x 64 from the KB941314 download RSAT. Can someone point me to download that will update RSAT so it detects the Server 2008 R2? I searched Microsoft Download and have not found anything suitable even.

    Thank you

    http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

    They will help you in Community Server 2008 at the above address.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite M40: Power calibration error - drive cannot burn DVD - RW more

    My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

    Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
    Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

    Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

    An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

    I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

    Experts have ideas? And is there a way I can reset the firmware?

    Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

    Hello

    > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

    Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

    But maybe you are a lucky man and might try this procedure:
    -Try to remove the drive physically from the Bay for laptop
    -Restart the unit without the drive
    -In this case the operating system should start from the HARD drive
    -Close the notebook then reinsert the drive unit in the Bay of s for laptop
    During initialization, the laptop should recognize the drive and must pick up the firmware

    Then you can check if you can burn the DVD again, otherwise you will need a new drive

  • Cannot burn DVDs from the tv recorded in media center

    I have a Dell XPS laptop with Media Center tv tuner.  I have no programs stored for a while but recently.  However, after recording a television with success, I want to burn to the disc.  However, when I put a dvd disc, nothing happens.  Nothing comes up asking if I want to make a copy as it used for a year or two ago.  I tried to watch a movie in the disk drive and it works, but time and time again, can't burn movies recorded on the disc.  Helping an older person!  Thank you.  Oh... computer is no longer under warranty (5 years).  I have the windows xp operating system

    Download and install Sonic Encoders: -.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-30721-1

    Read also: -.

    http://Windows.Microsoft.com/en-in/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

    S.Sengupta Media Center MVP

  • Satellite M45-S169 - Sonic v.7.31 cannot burn DVDs more

    I am using a v.7.31 Sonic Record now prepackaged on my Satellite M45-S169 for three years now.
    I was able to copy DVDs using this software.
    Until recently, it burns more.

    What's most frustrating is that space of memory on a blank dvd just exhausted once I try to burn dvd on cd files.

    Help! Help! Help!

    Hello

    Have you tried to delete upper and lower filters in the registry of the Windows operating system?
    Isn't it? Try this:
    Completely remove the Upperfilters and Lowerfilters from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Also I would not recommend trying the other and different discs (CD and DVD) from different manufacturers.
    But of course it could also be a hardware problem. I mean the discs of the laser lens has stopped working properly due to mechanical stress.

Maybe you are looking for

  • IPhone 6: how to find if the call is completed?

    Greetings, I often participate in the telephone conference call bridge company. When the Conference ends, I have a problem to find my phone if he "hung his handset. A few times already, I found that the connection has changed its status to "pending"

  • One of my two Firefox Windows is stuck at halfway offscreen

    I am running Vista, fully updated. I have two windows open in firefox, both with ten legs. I was moving around and accidentally moved one half out of the screen. Now he is stuck there, and whenever I try to bring him back, he moves slightly, then fre

  • Synaptic touchpad on/off button does not work? ??????????​ ?

    I bought the new HP G4-1037 you laptop... I installed Synaptics version 15.0.7.0... All things work correctly but the ON / OFF button at the top left with indication light does not work... Somebody help me how I can enable this feature of the touchpa

  • Unzip files

    'Help', explains to click with the right button on the file and click on "extract all". When I click right, 'extract all' does not appear. File folder, download, has a .zip extension. It's the second download with which this has happened. What I am d

  • Reinstalled Virgin mobile broadband 2 go and continues now trying to find the phone line to dial up

    I had to uninstall and reinstall the Virgin Mobile Broadband2go software and now whenever I try to connect to the internet, computer tries to find the phone line for dial-up access. I think that this happened to me once b4 and I had to change somethi