Cannot cancel the merge network connections!

Similar Questions

• Cannot configure the initial network connection

  I can't cross him select your Wi - Fi network on my new Mac Book. I have my MacBook Pro sitting next to. I know that the network (my house) and the password. My MBP is connected correctly. On the Mac Book, I'm selecting the network with a return and type the password then hit a return. The book of Mac is just the saying of circle of rotation in search network. I tired even go to another and by typing the name and the password. He put me on the screen next to the transfer of information. I said no and then I tried to move forward, but when I type my apple ID and password, it says: error server in red and try again. I know that those who are correct, also because I am enrolled in icloud on my MBP to confirm that I wasn't not commit an error.

  I have reset the router, rebooted the computer, nothing works. I spent two hours and my husband loving PC is just laugh. Any suggestions on what I can try next?

  I also tried to use a personal hotspot from my iPhone. Still not connect. I don't know why it says resolved, because I am not and can not figure out how uncheck that. Teenager also tried and got the same results as me.

• VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK

  I tried to set up a simple customer vpn using this document

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

  VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...

  6.3 (5) PIX version

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the encrypted password of VmHKIhnF4Gs5AWk3

  VmHKIhnF4Gs5AWk3 encrypted passwd

  hostname VOIPLABPIX

  domain voicelab.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside 208.x.x.11 255.255.255.0

  IP address inside 172.10.2.2 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool voicelabpool 172.10.3.100 - 172.10.3.254

  history of PDM activate

  ARP timeout 14400

  NAT (inside) - 0 102 access list

  Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1

  Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 172.0.0.0 255.0.0.0 inside

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac

  Crypto-map dynamic map2 10 set transform-set trmset1

  map map1 10 ipsec-isakmp crypto dynamic map2

  client authentication card crypto LOCAL map1

  map1 outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 encryption aes-256

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address voicelabpool pool cuclab

  vpngroup dns 204.x.x.10 Server cuclab

  vpngroup cuclab by default-field voicelab.com

  vpngroup split tunnel 101 cuclab

  vpngroup idle 1800 cuclab-time

  vpngroup password cuclab *.

  Telnet timeout 5

  SSH 208.x.x.11 255.255.255.255 outside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 172.10.1.2 255.255.255.255 inside

  SSH timeout 60

  Console timeout 0

  username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2

  Terminal width 80

  Cryptochecksum:b03a349e1ac9e6022432523bbb54504b

  : end

  Try to turn on NAT - T

  PIX (config) #isakmp nat-traversal 20

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1

  HTH

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• The active network connection icon keeps changing on me. He began by showing only 2 connections to the internet and the changes and then later to 3.

  Hi, the active network connection icon keeps changing on me.  He began by showing only 2 connections to the internet and the changes and then later to 3. But does not show where is this extra connection to connect to the local network.  I have a laptop so no wireless and cannot understand why he continues to display an additional connection.

  original title: network access connection

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 has there been any changes to your computer until the problem occurred?

  3. have you installed all types of network adapters on your computer?

  4. are you able to connect to the network and browse the Internet?

  I suggest you to follow the troubleshooting steps and check if the problem on your computer is resolved.

  Method:

  Check if the network adapter is displayed in the Device Manager.

  a. right click on computer or workstation.

  b. Select manage.

  c. click Device Manager on the left was next to the window.

  d. on the right side, locate the network adapters and click the arrow to expand the menu.

  If you have multiple NICs installed (watch), I suggest you uninstall the network adapters that is irrelevant to your computer by right-clicking on the adapter irrelevant and selecting Properties and then select uninstall.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• problem witththe driver for the wireless network connection card

  Quite suddenly my laptop (Toshiba) could not connect to my Modem and printer. I can only connect to the internet with a cable connection to the modem. The printer reports no problem with the connection. Troubleshooting report 'Problem with the driver for the wireless network connection card.' Problems also with ISATAP MS Driver adapter and Teredo Tunneling adapter. Software could not solve the problem.  A technician online know-how also faled to solve the problem after an hour trying everything - uninstalling and reinstalling, etc. He thought it would be a virus even though I have several active antivirus programs. Any ideas? Should I chuck the laptop away and buy a new one?

  If, as you say, you have several active antivirus running programs, they will conflict with each other and you will have no protection

  Visit the support of Tosh, specific to your model, and reinstall the drivers for the chipset and wireless

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Cannot make the payment or connect to Xbox 360

  Hi im having trouble connecting on my xbox360 and im getting this page saying: we need the e-mail address and the password for your Microsoft account so we can check and update your Xbox profile security when I press continue so I put in my email and my password and when I do that it is said that email and password did not work try again or use your app if password you set two-step verification and it does not make sense because I know my password and my email and if I say that I can't access my account computer gives me just the options that him does not work for me because I don't want to change my password cause I did it so many times and no one else use my microsoft account

  Original title: cannot make the payment or login

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Yellow triangle with! the wireless network connection in the task bar icon, but ok in Device Manager

  I still need help: 11-24-10' uncorrected problem after all

  I have a laptop of refurbished HP older Pavilion ze5385US who has recently lost the wireless connection.  Now, I have to leave it plugged in to use, not practical at all.  I did the right click on the icon to open the network connections, left clicked wireless network connections and then clicked "repair this connection.  The uninstaslled of the computer, and then was not able to reinstall.  When I checked D, it was empty.  I thought it was where restoration stuff should have been.  So I downloaded and reinstalled much Express IEEE 802.11 PCI card Lan, until I found the one that the computer would be except.  Now, it appears in device very good Manager, but has theyellow cone with! on the icon in the status bar at the bottom.  When I raised it lights, it is said: 13 of (ANY) wireless network connection, speed: 11.0 Mbps, Signal strength: Excellent, status: limited or no connectivity.  When I choose "View available wireless networks", I get "Windows cannot configure this wireless connection.  Under network without wire/support/details of connections, Iget physical address: 00-02-8A-92-BE-0C, IP address: 169.254.196.112 subnet mask: 255.255.0.0, then the default gateway, DNS server, WINS server & have not enumerated values. I'm afraid to hit the repair again, it could wipe out the only map I've found so far that is accepted by my computer.  When I try to enter the knowledge base for WinXP, I get an error for this page, as well as several other help pages I tried the site of microsoft.com for help.  When I used configurationtool thewireless zero in respect of services & restart earlier, I had a red X on my icon, so I guess I've lost my card after all.  Can I disable this?  The map always shows as OK in Device Manager.  Any ideas anyone?  I need help here please.

  Hello

  I thank you and wish you the same.

  I see that your problem has been solved using the HP driver that you mentioned on Thursday, November 18 in your message and the Express.sys is a problem with Windows install.

  I suggest to install the version of Windows install 4.5 on the system from the link below and then update the driver from the link that was attached to your question before and check.

   

  Step 1:

  Install windows install 4.5

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:

  Update the driver from the link you mentioned in your previous post.

  I suggest you to check with TP-link if this model is compatible with Windows XP or not.

  http://www.TP-link.com/products/ProductList.asp?class=WLAN#S6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• HP PhotoSmart restricted 6525 in the wireless network connection

  Hello

  I need to connect my HP PhotoSmart 6525 to a wireless network in my college dorm room.  IT supports the University has published the requirements for the connection to the restricted network and attention that many printers cannot. I looked on the HP website to see if my printer supports the protocols required, but information HP provides on the website is not detailed enough to tell.  I hope that someone on the forum can help me.

  Here are the requirements of universities to connect to the restricted network:

  ----------------------------

  • A device with a Wi - Fi adapter capable of 802.11 g, 802. 11A or 802.11n

    Note: 802. 11 b-only devices are not supported

  • To enable DHCP (Dynamic Host Configuration Protocol) to obtain IP configuration information

  • Operating system and drivers that support:
    • authentication of 802. 1 x (also commonly referred to as WPA-Enterprise or WPA2-Enterprise)
    • WPA2-AES (preferred) or WPA-TKIP
    • EAP-PEAPv0 (external auth) / MSCHAPv2 (internal auth) or EAP-TTLS (external auth) / MSCHAPv2 (inner auth)

  All connections to the campus network, no matter what either wired or wireless, must also bear the following (which are installed and enabled by default on modern operating systems):

  • IPv4 (Internet Protocol version 4)
  • TCP (Transmission Control Protocol)
  • UDP (User Datagram Protocol)
  • ICMP (Internet Control Message Protocol)

  ----------------------------

  Does anyone know if the HP PhotoSmart 6525 meets these requirements?  For example, he says "PEAPv0(outer auth)/EAP-MSCHAPv2 (internal auth)" or "EAP-TTLS(outer auth)/MSCHAPv2(inner auth)?

  Thanks in advance,

  Paul2

  "I could check on the web site of www.wi-fi.org HP Photosmart 6520 series is approved for"WPA-Personal"and"WPA2-Personal"and _not_ certified for" ' WPA-Enterprise and WPA2-Enterprise.  The Enterprise versions require the device to authenticate with a username and password, while the personal versions are not.  I also talked to the school, IT supports and independently, they have said that the problem with the help of authentication printers more is that you can not provide a user name and password.  Given that I could check with two sources independently, according to me, the definitive answer is that I can't use the printer with wireless network from business school.

• Cannot enable the wireless network adapter

  Hi all

  I have an old Dell Inspiron 1564 of 5 months with a Wireless 1397 WLAN Dell card. I had a few difficulties to connect to my wireless router, and as a last attempt to make it work, I have uninstalled and reinstalled the driver for my wireless card, using a new download of the latest version from the Dell support site.

  The driver seems to install fine and when I look at the card wireless in the Device Manager, it is enabled, but in "control configuration\reseau and Internet\Network connections" (which are accessible through the Network and Sharing Center), it is grey and says people with reduced mobility.

  When I click on activate in there, a small window opens saying "Activation", then after a few seconds, he says "Enabled" then disappears. However, the adapter remains disabled in Center of N/W & sharing and is not detected by Windows.

  I tried to reinstall the driver to install Dell drivers, as well as automatic windows driver search and no work. I also tried to do a system restore, but this does not (cannot finish on any of the restore points).

  I also spent 1.5 hours on the phone with Dell support and their final advice was to format and reinstall Windows.

  The same question is reported here and here, with no resolution apparent. Can anyone offer any advice I've already tried? Thank you!

  More details:
  -I am running Win 7 Pro.
  -Wired networking and internet connection works fine
  -J' have Zone Alarm and Avast Anti virus and I tried to disable both without success

  The same problem has been posted by other here, here, hereand here. It seems to happen with different brands of cards from NW.

  Hello

  Thanks for the reply. Actually, I got my wireless works today. The steps are, keeping in mind the stuff that I had already tried as stated in my original post:

  -Uninstalled Zone Alarm and Avast Antivirus.
  -Restarted mode without failure.
  -Uninstalled the Driver 1397 WLAN Device Manager.
  -Manager of uninstalled Dell Wireless cards Control Panel > programs.
  -Restarted in Mode safe again.
  -Reinstalled last bouquet of 1397 driver Dell (R237742.exe)
  -Rebooted in safe mode again to verify that the adapter was showing less active in Safe Mode, which it was.
  -Restarted normally to find the list is activated.

  Now I'm right back to where I was before, not being able to connect to my router, but I do not suspect my computer or my card wireless for the moment because I have four wireless devices in the House (this new Dell laptop, another 4 years Dell laptop, an 8 - month, Sony VAIO and a 6 - month old iPhone 3 g). All of these devices, the one that connects to my router is the Sony, so I think I have as well the router problems. I'll probably start another thread on the subject, just to keep this central thread.

  So to summarize, for anyone having the issue where your wireless card is showing disabled in Network Center and share and right click Activate this doesn't even after reinstalling the drivers the most recent, I would recommend to explore two options:
  -Disabling or uninstalling Antivirus software or firewall
  -Uninstall and reinstall the drivers Safe Mode Wireless
  If you are interested in reducing the problem a little, I recommend you to try these separately, probably the SafeMode option first.