Cannot change anything in the action center error code and the blue screen and stops.

I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

Hey Chrisb,

You did changes to the computer before the show?

Step 1: I suggest to start the computer in safe mode and check if the problem persists.

Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

Tags: Windows

Similar Questions

  • "Windows Firewall cannot change some of your settings. Error code 0 x 80070424 ' how to fix this?

    I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7).  I am also unable to start my computer in safe mode.  My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system.  The virus also seems to have removed all the system restore points before the infection!  I believe that I have the virus completely deleted.  I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials.  I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One.  Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program.  I need to know how to get Windows Firewall works again & get Action Center working properly again.  My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings!  Can anyone help?

    Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.

    Hello

    Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

    This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

    Download the two files from the registry

    Windows Firewall - MpsSvc

    BFE - base filtering engine

    Run them and click YES when you receive a UAC prompt

    Restart your PC

    Press Windows key + R and type

    regedit , and then click ok

    Reach

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

    Right click on it -permissions

    Click ADD and type

    Everyone, and then click ok

    Now click on all

    Below, you have the permission for users

    Select full control, and then click ok

    Press Windows key + R and type

    services.msc , and then click ok

    Start the service database and then filtering engine service windows firewall

    If you still get this error

    Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

    Download and launch this key

    Shared access

    Click YES when you receive a UAC prompt

    Reach

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

    Right-click on -permissions

    Click Add and type

    Select full control and everyone

    You should be able to start the firewall now

    You can also Miss defender of windows security center, BITS and windows update services

    Download

    Security service center - wscsvc

    Windows Defender -windefend

    BITS - BITS

    Updated Windows - wuauserv

    Run them and click YES when you receive a quick restart, UAC the PC


    Good luck

    * Edit *.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...
  • Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

    My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

    Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

    Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

  • I receive emails, but cannot send anything. I get this error code, 0x8CCC003

    I receive emails, but cannot send anything. I get this error code, 0x8CCC003.  I called embarq, but they do not know how to solve the problem. Any suggestions for some who is NOT computer savvy?

    Ok. You will need to ask the experts of WLMail. Here, few people use this program.

    Windows Live Mail Forum
    http://windowslivehelp.com/forums.aspx?ProductID=15

  • Firewall Windows cannot change some of your settings. Error code: 0x800704c

    I get this message when you try to turn on my firewall. "windows firewall cannot change some of your settings." "Error code: 0x800704c.

    Hello
    Follow these instructions to fix the Windows Firewall:
    Download and install repair Windows: 
    When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
    Brian
  • Firewall Windows cannot change some of your settings. Error code 0 x 80070424

    I use 8 (64-bit) windows, try to turn on "Windows Firewall".

    Get this error "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

    I tried to locate the "Windows Firewall" services in the service (in Services.msc) database, but this service is not listed. Help, please

    Thanks Robear,

    Today, I just made "Reset PC" to make it back to my factory setting (even if I lost all my data, but I've got to the top of it). Then, I used "Norton Removal Tool" to remove Norton who was there in orginal factory setting.

    Now, I tried to run "Windows Defender" & "Windows Firewall" both are running without any problem.

    Thank you much for the help.

    Vikas

  • Re: Portege M400 - cannot change anything in the Bios

    I need to device boot cd-rom 1-st.
    It has no operating system installed on my hard drive.

    I couldn't change my BIOS.
    I hold down the button Esc then F1.

    After I see the Bios screen, but I can't change anything.
    I can only escape without and with the changes?
    No element can be changed?

    Can someone help me?

    Hello

    You do not need to change the boot device in the BIOS.
    You can also set it in laptop power on.
    Press F12, immediately after that the laptop has been powered
    Then a start menu should appear.
    Here you must choose ODD as boot device and should confirm with the Enter key.

    That s it

  • I got the blue screen with STOP error: 0x0000008E (0xC0000005, 0xB9E28ABA, 0xAA319AE4, 0x00000000).

    Well that slowed down, repeatedly gets "blue screen" with code above.  Next line is:

    fltMgr.sys - address B9E28ABA base at B9E23000, DateStamp 480251da.

    Updating drivers did not help.  This t do?

    Need help

    Hi IsaiaAvraham,
     
    Here is an article that could be useful for:
  • Cannot change anything in the settings of Restrictions

    I am the scene long distance technical support for iPad from my mother.  In his screen settings Restrictions, she can't shut down on one of the buttons and clicking on other sections does not allow/disallow changes screens.  Basically, it seems that the Restrictions screen is completely broken and does not accept any entries.

    She must type "Activate Restrictions" at the top of the screen and create a password first.

  • BSOD error codes and stop after windows update

    Hi all.  I have a computer dell laptop, inspiron e1505. 2 days ago, he did a system update and then restarts are not at all. If I start windows normally or start with the last known good configuration I get the BSOD and stop error codes, 0x0000007e, 0 x 80000003, 0x805c370c, 0xf79e02b4, 0xf79dffb0.
    If I try to any safe mode, it begins to go through a list of drivers then stops briefly and goes to a blue screen Uni with no writing at all.   It's beyond what I know how to fix.  Thanks for your time

    Kb971486 uninstalled by using the recovery console, works again.

  • The blue screen with stop continues to appear randomly and everything closed options.

    using screen blure xp2000-The windows guard poop upward and it stops even the task manager.it destroyed my work and everything is open :( Can someone tell me how to stop this blue screen please?

    sounds like a virus.

    first things first - make a complete AV scan - then download superantispyware and do a full scan.

  • Firewall Windows cannot change some of your 0x8007042c settings error code.

    My Windows Firewall is turned off by itself and it won't turn. I receive the error message in the description. I was facing this problem since shortly after the installation of Windows 7. I tried the repair suggested here http://social.answers.microsoft.com/Forums/en-US/w7security/thread/e5ee6823-98f8-4575-a254-00a038b17e34 .bat file but that did not work. I saw some errors when I ran the .bat file, but the window closed so quickly that I couldn't read. I'm at a total loss about how to correct this problem. I don't have a third-party firewall installed.

    It worked when all else has failed... If you guys tried to start the services as stated in amrita and couldn't ' try this... It works... chk this link... what narenxp said.

    http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/f12af006-4712-4EC2-b579-281c58262d61
  • Cannot open firefox, get cannot open XPCOM. Impossible to open IE. Cannot type anything in the address to Fiefox or IE line. What can I do?

    I ask this in the name of a friend. She has a Toshiba laptop, windows 7. It is not computer. She used her phone OK yesterday, playing a Facebook game (played several times before) and everything was OK.
    Today she when she tried to access Firefox got 'cannot open XPCOM.
    She can not open IE either.
    She cannot type anything in the line of address for Firefox or IE

    You will need to use another computer if your computer do not have access to the internet.
    You can download Firefox for it and save the file to a USB key.

    Try this:

    Save the full Firefox installation program on a USB

  • cannot change directories since the last update

    problem, the vulnerabilities of windows on my software now since the last update last night. any program, try to change directory and get an error code that the program ended unexpectedly.

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understanding Windows Update and Extras in Windows Vista at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not resolve the problem:

    Windows Update Forum:

    This is the recovery and repair of Vista Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

    Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

    Hi larrys57575985,

    To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.

    Best,

    Sara

Maybe you are looking for

  • Portege Z30 / driver Audio Replicator + Touchpad scroll problems

    Hello. I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)but there are a few light (more or less can be addresses as a driver) questions that I discovered. Notice: I use Win7 64. (1) with the Replicator Do

  • Control of Bruker OPUS with Labview

    I want to control software OPUS by Bruker using Labview, orders base such as take spectra, someone knows how to do this? Thank you

  • electronic timestamp

    Hello! I tried to send an e-mail, using 'Send Email using SMTP Client.vi' (example labview).The timestamp of the couriers were 01.01.1970 every time.How can I send an email with time stamp correct?LV version: 2014 SP1 Operating system: Windows 7 Than

  • Windows 8.1 - M92p - driver ACPI

    Hi guys,. Came on a little problem while building a Windows 8.1 for this M92p image I have. There is a device that is not installed: Unknow device - ACPI\LBA0001 I found the driver for it. When I auto install from the exe, it works very well. The pro

  • Flash Player not working not not on a 64-bit internet explore

    I can't see the web vedios flashplyer is not downloading in windows 7, 64-bit vertion