Cannot change how the important windows updates are installed 7

Similar Questions

• How to control the Windows updates are installed on the Windows Surface of RT

  I recently had to perform a refresh to solve the problem with desktop on the desktop icons that appear as spaces. After the update, I had to reinstall the update for Office 2013. When I went to Windows Update to do this, I found it with a group of 9 other updates, these 9 were all marked as ready for download and installation, Office 2013 update is not checked. I disabled the office 2013 update and not the other 9 updates, thinking that I could make those after I had Office installed upgrading so I would like to know if my taskbar icon problem has been resolved. At the bottom of the screen even when the Office update was the only update checked I chose to install updates. The Surface actually installed all updates, not only the update of Office.

  Is there a way to control which Windows updates are installed in fact at some point? Unchecking them made no difference.

  Hello

  Welcome to the Microsoft community!

  I understand that you are facing problems while installing Windows updates and want to know if there is a way to control which Windows updates are installed in fact at some point. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Automatic update of Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Updates defective installation as computer repeatedly sending message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Faulty installation of update as a computer several times to send the following message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Hi NickGodin,

  You can try these steps and see if it helps.

  Step 1:

  If you are unable to boot into normal mode, you can read the following article and try the steps to run the system restore.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  Step 2: When you are in normal view, you can see the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  You can also try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Windows updates are installed every time I shut down the computer.

  Original title: updates that won't go away

  I don't think, every time, every day, that I stopped there are updates installed, it's true.  can someone tell me why?

  comp going crazy?

  Hello
  
  1. the updates have been installed? You can check this in update history.
  Check if the same updates are every day. Send back the same.
  Try to rename the software distribution folder and check.
  a. Click Start, type services.msc.
  b. press ENTER.
  c. right-click on Automatic Updates service.
  d. click stop. Stopping the service will take a moment.
  e. click on the Start button, type %windir%\System32 and then on enter.
  f. rename the folder "C:\Windows\SoftwareDistribution" (say, SoftwareDistribution.old):
  g. Click Start, type services.msc.
  h. click OK.
  i. right click on Automatic Updates service.
  j. click Start.
  k. starting the service will take a moment.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to stop windows update to install the update even again and again?

  Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. the update is that updated security for Microsoft XML Core services 4.0 Service Pack 2 (KB954430)

  Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. the update is that updated security for Microsoft XML Core services 4.0 Service Pack 2 (KB954430)

  In order to get the KB954430 installed correctly, please see - difficulty: KB927978 and repeatedly revived KB925672 MowGreen Update Services - consumer safety

• How to: Determine Windows updates were installed

  Original title : Scan windows update

  I'm running Winxp and I was wondering if there was a file that contains all my previous windows updates that have gone on the computer?

  If not, how does he know windows update updates, I still need and that i don't?

  If you want to know what's installed or missing: -.

  Microsoft - Microsoft Baseline Security Analyzer.

  http://TechNet.Microsoft.com/en-AU/security/cc184924.aspx>

  UTC/GMT is 13:55 Friday, February 10, 2012

• Automatic updates on my home edition of Windows XP several times trying to install service pack 1 and every time the display shows that it could not be installed. All other updates are installed successfully except Service Pack 1.

  All windows updates are installed automatically with success except on my Windows XP home edition SP1.  It lasts for years, but now I'm wondering if there is a problem of security which is not treated without the update.

  Nana B,
  Take a look at the two links below and try the steps listed as this can help to solve your problem.

  Solve Windows Update installation issues

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• So, how can I knowif and Windows Update has installed correctly. Because my computer closed connection or and I have to restart.

  Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down.  and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.

  Hi Jo AnnHerrera,.

  What browser do you use to play games?

  You can visit Windows update history to check the recently installed updates, failed.

  Check the update history to see what updates have been installed. Visit the below mentioned link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If you use Internet Explorer to play games, refer to the suggestions from this link.

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  I hope this helps.

• Windows Update crashes, install update 16 of 18

  Original title: windows machine update caused to hang

  The machine seems to have hung over the windows update process - the rest of the screen to "do not turn off or unplug your machine." Installation update 16 of 18. At this point, he remained for over half an hour. What can I do?

  Hi Alfredlee,

  If the window is still blocked on the installation of update page, you can restart the computer, choose start normally and check what is happening.

  Step 1:

  If you are not able to boot normally to the desktop, you can consult the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed by following the link:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• Suddenly, all the printer drivers on Windows update are not digitally signed? So, how to re - install my 3 printers?

  Suddenly none of the printer Co. provides always the downloaded drivers more! And they all quit working, pilots didn't is more accepted, after problems with the Windows updates in general, seem to be fixed now.

  And I finally see HP instructions for a workaround 4 pages long, in Device Manager. But no driver is never accepted to be unsigned digitally suddenly...

  All the printer drivers on Windows update are digitally unsigned? So, how can I install my 3 printers? They are too recent to have discs and HP and Lexmark refer to Device Manager find but none will install because they are not digitally signed. I have W7, W10 and a XP computer for when I have a really frustrated with Windows. Like now.

  How can I reset W7pro and W10pro to accept these drivers yet once, to accept unsigned drivers? What is going on!!!

  Thank you

  I fixed most of my problems of

  -Restore W7 to the 07/01/16 mode without failure and update of the manual setting W.

  -Go back to Firefox 32, with no updates

  -find something new called firewall W features advanced security and made some slash and burn allowing in there

  That's all the misfortunes of weird denied permissions disappeared. I guess I'll stay frozen in time until I get a real solution to all this new protocol permissions I lock the...

  Thanks to you all. I can finally sleep a bit now!

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• How can I fix error "changed default location for Windows Update files" that Fit-It notes several times, but does not solve?

  Using Windows XP Home Edition SP3, IE8, and Firefox 13.

  Used several times to install and MS Fit-It tool to try to fix Windows Update so that will download the updates of high priority.  4 four security updates not always settle.  Fix - It tool shows that "one or more Windows Update are configured incorrectly" and that it has been fixed (run 10 times).  He also pointed out "where Windows Update stores data has changed and needs to be repaired", but offers no solutions to fix this problem.  Cannot find any reference to this in the KB or MS answers.

  Is it possible to repair this problem and it will make a difference by allowing for installing security updates?  I talked to Ms. telephone and e-mail do not install security updates, but they say I have to pay $99 to get this issue fixed MS Update.  I thought I read that security patches are supposed to be supported without charge.

  Any new advice or techniques for solving this would be appreciated.

  Hello RickH999,

  Follow the steps in the article to reset the Windows update components and check if the problem persists.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• Cannot access Internet after installing the latest Windows updates

  Hello

  updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

  Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

  " Original title: blocked internet access"

  Hi Eugene,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the type of internet connection you use - wired or wireless?
  2. Do you get any error message when there is no internet access?
  3. What is the number of KB of the update, after which the internet disconnects?

  [To view your history of update:]
  a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
  [ b. press or click on see your update history.]

  The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

  In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Method 1: Troubleshooting of connection Internet run.

  a. press the Windows key + W key on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click on Internet connection, will new popup window.

  e. follow the instructions on the screen.

   

  Let us know the results performing the Troubleshoot utility.

  Method 2:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X.
  2. Click prompt (Admin).
  3. Please enter the following commands and press ENTER after each one.
     NETSH INT IP RESET
     IPCONFIG/FLUSHDNS

  Restart the computer to check the issue.

  If the problem persists, refer to the following method.

  Method 3:

  Temporarily disable the security software and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most

  cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.