Cannot change the BIOS settings

Similar Questions

• HP Folio 13 has password administrator (cannot change the bios settings)

  Im trying to change the boot order to USB key and it gives me "system disabled 76799886. Is it possible to boot usb or should I scrap it? Help, please

  Hello

  Try to enter: 69691208

  Kind regards

  DP - K

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

• Satellite 2060cds: what I need to do to change the BIOS settings?

  I need help.
  I installed Windows XP Home, and now I can not access the toshiba hwsetup software, to change the password or other settings of the bios.
  What should I do to change the bios settings?

  Thanks for your help.

  Hi Paulo,

  Normal access to the BIOS Setup is by pressing F2 during the initial power of sequence.

  Kind regards

• How to change the BIOS settings to read the Norton CD?

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

  1. the computer starts from the CD and you can follow all instructions you have Symantec.

  2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

  3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

  You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

• X 1 carbon - cannot unlock the Bios settings

  Hello!

  For testing purposes, I set a supervisor password and put a lock on the Bios settings. Since then I can't access the settings because I have never asked the supervisor password. The biometric characteristics are activated. So when I restart and press F1 I get into the bios without beeing asked a password but I can't change the values.

  You associate your fingerprints with the supervisor password?  Another option instead of dragging your finger please press ESC and then manually type the password, I hope it will work.

• Satellite L755-129 and Win8.1 - cannot access the BIOS settings

  Hello

  I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

  What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
  Can someone help me? I don't want windows 7 I like windows 8.1.

  Thank you for your help

  It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
  Now we have the situation with the old machine Win7 but with Win8 preinstalled.

  Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  This situation does not for me so here's a question for you:
  When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

• This folder is located in the windows folder: $NtUninstallKB36574$ It is not available and you cannot change the security settings.

  This folder is located in the windows folder: $NtUninstallKB36574$
  It is not accessible.  I can't change the security settings.
  It is the remains of an outbreak of the virus.
  I saw that on 2 client computers this course last 6 months.
  So, how is it possible for an inaccessible folder to administrators?
  How can I change the security settings to remove.
  After you run several virus cleaners, I'm pretty sure that the virus has disappeared.
  Ideas?

  You should be able to remove it from the command prompt in Windows Repair Mode.

• Cannot change the safesearch settings

  Original title:

  SafeSearch settings

  Why can't change the sharpness of safesearch under PC control change window

  Hi John,.

  1. What happens when you try to change the safesearch settings? You get the error message?
  2. Is research and results from Bing website suggestions option enabled? If this is not the case, turn it on and try to change the settings. This is because if the same is disabled, then the option in this window will be gray and you will not be able to make changes.

  Please update with the status of the issue.

• HELP... z400 will not start after changing the BIOS settings

  Hello

  I went into the BIOS and changed all the PCI slots to include 'calculate' so now it does not recognize video card, now it does not start far from enter the BIOS to undo changes. Ive pulled the battery, reset the CMOS button and jumped the pins CMOS won't default. To b e there is a way to fix it... Please any ideas will be appreciated.

  Hi Glenn,.

  Thanks for posting your query in Microsoft Community.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I recommend you contact the manufacturer of the PC for the procedure for making changes in the BIOS.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• LaserJet MFP M277 PLC6: Cannot change the color settings, specifically in the category of graphs

  I need help on how to change the color for printer settings. I am unable to print graphics on forms, they come out as a solid black box. When I go into the color options I'm completely unable to change, there is no options to change anything: it only shows as neutral gray and black graphics.

  The printer has been the subject of assessment, and there are no exceptions to this topic. Please help.

  Your question is usually a driver problem.  Try to use pcl5 or postscript driver to see if one of them makes a difference.

• I am Admin on my PC, but cannot change the display settings.

  I have vista home premium and I can't change my wallpaper. I am logged on as administrator and can change most of the other settings, but a box tells be that the administrator has blocked the launching of the display settings control panel. I don't think that I have never done this, not intentionally at least. I tried to use the parameters of Environmental Variables, but it's like a foreign language to me - I don't know what to do with it. I don't have time for this! I have a job to do. Does anyone know an easy fix for this?

  Hello wall14hm,

  Here is one link: http://windows.microsoft.com/en-us/windows-vista/Change-your-desktop-background-wallpaper which will help you in detail on how to change your screen background image (background). Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot change the screensaver settings

  Original title: __Locked (in gray) screen saver settings___

  Hello

  I just changed a new laptop with win 7. I have a little problem with screen saver which is defined in the field of sleep on white screen, set to 15 minutes and requires the password. Everything is more gray, so I have no possibility to change that.

  Can someone help me to unlock the screen saver settings (remove the grey shadow) so that I can customize my screen saver?

  Thank you

  Hi Baracus,
   
  1. are you able to click on the dropdown under screen saver?
  2 or it is dimmed as well?

   

  If this isn't the case, then select a different screen saver and try to change the settings.

   

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.