Cannot change the default installation directory (missing ProgramFilesDir)

Similar Questions

• How tio changes the programs installation directory, I want to install?

  How tio changes the programs installation directory, I want to install? I'm trying to install a lot of programs is always installed in "Local disk C" that low memory space. Please tell me how can I install the programs in other folders such as "Local disk D and E and F. And also please tell me that the directory in which the widows is installed when reached about his memory limit, does windows performance issues.

  Win needs 15% free space for proper operation.

  Using various hacks registry posted on various sites to redirect the default program installation folder to another drive is not supported by MS and can cause problems.

  Most of the programs when you install them have the option for a custom install, where you can specify where / which drive to install, but not all programs have this option. Even if you install a separate drive various files/folders will be written on victory drive.

  If the drives D, E & F are separate partitions of a disk, you will need to modify/extend partition in win

• How can I change the lightroom installation directory

  The default installation directory has changed and has been a success for my installation of Photoshop CC 2014, but the repertoire of Lightroom remains as default directory.

  How can this be changed?

  After speaking with a service representative customer, it is confirmed that this is normal and there is no intention to change this.

  It is a big barrier for those who have tiny disks.  There are many people who have tiny disks that store only the operating system.  There is no room for additional programs.

• Cannot change the default mode in wscript

  In Windows 7, when I try to change the default mode of wscript, I get an error message. When I get home

  CScript //H:CScript

  the command line, I get

  CScript error: cannot change the default script host

  What should I do?

  Open command prompt w / administrative permissions (right click, run as administrator), and then run the command:
  cscript //h:cscript //s //nologo

• Cannot change the default printer.

  Original title: print printer print

  Can't change my default printer to a printer that is assigned by the computer when you purchase my Canon MX310.  How to change.

  Hello

  This behavior can occur because of corrupt drivers, incompatible drivers, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  You get the error while changing the default printer? If Yes, what is the exact error message?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Set or change your default printer
  http://Windows.Microsoft.com/en-in/Windows-8/set-change-your-default-printer

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cannot change the default program

  1 HP Pavilion dv6

  2 Windows 7

  3. "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  4. Windows update itself

  5. I was always able to change the default program, until Windows has created an another update (which still live with my settings).

  When I right click > Open with > choose by default the program give me this vague and frustrating error message indicating 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This is a load of ponyfeathers, because I am the only user and administrator of my laptop. I tried also to the solutions, but the error is apparently used in multiple areas of screw - rises of Windows. This error applies to all files.

  I am still able to go to administrative tools and change the defaults from there, but I'm not THAT tech savvy and I don't like playing with the pieces dark and deep programming from my laptop.

  Hello

  Restore the system to the point before you install this update from the Windows Update.

  Resources:

  How to do a system restore in Windows 7

  I recommend you to change the default setting for Windows Update:

  Open the Control Panel (Display icon)and click the Windows Update icon.

  In the blue left pane, click the change settings link.

  Changing current configuration in ' updates ' on ' check the updates but let me choose whether to download and install them. '.

  Resources that I think that will be very useful for you:

  Hide the Windows 7 updates that you don ' t Want never to install

  How to uninstall a Windows Update in Windows 7

• Cannot change the default CSS

  I want to change the default colors used in the "Table" view games I changed C:\OracleBI\web\app\res\s_oracle10\b_mozilla_4\views.css and restart the presentation services. I still have not the desired effect when I create the new application.
  
  What I'm missing here?
  
  Thank you
  Dinesh.

  You also update the same file in the folder \OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\etc.?

• Cannot change the default e-mail program

  I tried to change the default email program in Vista to Thunderbird by following the instructions found on many sites (Control Panel, programs by default, set your default programs, and then I select Thunderbird, then I click on "set this program as default").

  However, when I try to send a document as an attachment directly from the application in question (Adobe Acrobat, Microsoft Word, etc.), I get an error message that says: "no profiles have been created.  To create a new profile, use the Mail icon in Control Panel.  I believe that used to work at some point, although I did have this computer for a long time, so maybe it's that he has never worked on this computer.

  Any ideas would be greatly appreciated.

  Thank you.

  It is usually the case with an update of Office, it will reset Outlook as the e-mail Manager by default and assign it all by default available values.  You will need to return to "default programs |" Set your default programs and reset Thunderbird as default and there all available default values assigned.  It is usually a good idea to set Thunderbird as default under "default programs |" The value of program access computer settings by default and after finishing upward on the tab "Set your default programs" by Ramesh was mailed. Please do not forget that * every * Office Update, you receive will probably reset Outlook as Manager default e-mail, and you will need to repeat this process whenever they do.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• No HDMI Audio, could not play the test tone, cannot change the default playback device

  Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.

  I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.

  The problem (s):

  My main problem is that I can not any audio to play from my PC to my HDTV HDMI.

  When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.

  When I try to test the TV in playback devices, I get an error "could not play the test tone.

  In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.

  In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.

  The Question:

  How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?

  What I tried:

  I tried:

  • Change the default playback devices, which I am unable to do
  • The utilities of reading Audio de Windows 7 running in a clean boot state
  • Uninstall and reinstall the driver Intel(r) Audio display
  • Uninstallation and reinstallation of the IDT High Definition Audio CODEC
  • Uninstall the IDT Audio PC program under programs and features
  • Disable the IDT High Definition Audio CODEC

  Nothing has worked.

  The drivers I have are the latest issued by HP

  How can I get this to work? I would appreciate help.

  I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.

  Your expertise is greatly appreciated.

  Thank you.

  OK, I finally have the answer for that.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Restart your faulty computer.

  I hope this helps. It worked for me.

• Cannot change the default program for opening .dll

  For some reason any, since I first linked the default program to open files .dll with Visual C++ 2010 Express (which is not truly attempt open, but instead of it gave me a message somewhere near the lines of "File not supported - Type does not open", incidentally) by chance I could not change since. I took a screenshot of the dialog box to try to change (URL below after all), but I noticed that the box was grayed out (the theme I have is a modified version of the classic Windows theme, but on 7, to clarify the operating system). I also tried to select a file after having hit the "Browse" button, but it didn't open anything. I tried several programs in the present to open, much less to change the default value (these are two notable examples): Netbeans - primarily an IDE for Java, but can open binary files even if she's not actually modify them (note: I changed absolutely nothing on any of them even if I has modified it to make it the default program but this problem affects more than just the ones) (, and it did not start until the last default) and Notepad. I went through the 'Open with' dialog box, and this is where I first encountered the problem of it (described above) outside the Control Panel, which it wouldn't let me change the association of file of it in particular, even if I didn't have one of these questions with any other type of file I tried to change, before or after this madness.

  https://docs.Google.com/file/d/0B02h60r9WvJrZ1E5R01xZzJ4akU/edit?USP=sharing

  Hello

  I suggest that you try to restore the system to an earlier point before the issue started and check if it helps.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Some applications play with headphones, and some of them play in my speakers. Cannot change the default playback of helmet device.

  Original title: Headphones working strangely

  I'm having a problem with the audio of my computer. I can't change the default playback to my Apple or my Turtle Beach x 31 headset device. Some of my applications are playing through my headphones, and some of them play in my speakers. When I look at the problem online, he keeps leading me to the evolution of my default playback device. When I right click on 'Helmet of Communication' and select "Set as default device" nothing happens. Not at all. They are defined as my default communication device already, who does not even make sense, since I was on my microphone internal.

  I already tried to uninstall driver "IDT High Definition Audio CODEC". Did not work.
  Sorry if I left out important information. Tell me. I know a little about computers, but I'm certainly not an expert.
  Hello
   
  I suggest you follow these methods and check.
   
  Method 1:Follow the suggestions in this article and check.
   
  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2: Uninstall and reinstall the sound drivers.

  (a) click Start, click Control Panel.

  (b) click system and security, click System.

  (c) click on Device Manager.

  (d) develop sound, video and game controllers.

  (e) right click on the sound card, click Properties, click Driver tab.

  (f) click on Uninstall, click Ok.

  (g) restart the computer and check.

  If the problem persists, I suggest you to download and install the drivers manually from the sound card manufacturer's Web site.

  I hope this helps!

• WCS 4.1 - change the default backup directory

  Hello

  No one knows how to change the directory that uses WCS for the scheduled backup. By default, it uses the location specified during Setup ftp, but I need to change it to another partition of disk and can not see how you change. I can do it for manual backups using dbadmin, but need to change the location used by permananently scheduled backup

  With the help of WCS 4.1 for windows

  Follow the steps below:

  1. for starters, stop the WCS.

  2. to change the root directory of the FTP server, move to the x:\Program Files\WCS4.1.xx.0\webnms\ftp-server\conf and change the first line of the ftpd.conf file to point to the desired location.

  3. to change the root directory of the TFTP server, place you x:\Program Files\WCS4.1.xx.0\webnms\classes\com\cisco\packaging and change the line that starts 'TftpRoot =' in the file PackagingResources.properties to point to the desired location.

  4. after the registration of the changes in these two files, restart WCS

  -nael

• Cannot change the default input language

  Hi all

  I recently had to reinstall windows because my failed (second one) these SSD SSD are not very reliable. but this is not why I'm here. I have windows 7 ultimate 64-bit, and when I installed it I choose 101 Arabic as the input language. After completing the installation, I added US international at my keyboard and set it as the default input language. Now whenever I reset my system or disconnect the default language keeps going back to 101 Arabic.

  I tried to uninstall both languages, but that did not help. I also put the default Arabic language so that when I've reset, it will change to English (lol) but that didn't work either. I have an OEM version of windows if it makes a difference. any help would be appreciated.

  Try to copy your (Arab as the default input language) settings to the Welcome screen, system accounts and new accounts of user as described here:

  http://www.SevenForums.com/tutorials/90671-region-language-settings-copy-new-users-welcome-screen.html

  I hope this helps.

• How to change the default installation for MS Reader in Windows 10

  So I have all my settings for applications (on windows) changed to where I want Acrobat Reader DC, but the installer always puts on my C drive (with no option to change the installation location). I would like to have it on my D drive. I don't see a framework to achieve this. Am I missing something or do I have to learn to deal with it on my C drive? Any help is greatly appreciated.

  David

  Hi DLanzJr

  Please visit this link which deals with the same thing: How to install Acrobat Reader DC on my D drive?

  Let us know the results.

  Thank you!

  Shivam

• Contact quick tasks cannot change the default application

  I've set up the quick tasks contact for text messages, but accidentally chose the stock default e-mail instead of handcent app.

  Is there a way I can change it back, or at least that he can ask me whether the app I want to use for e-mail?

  settings > applications > manage applications > menu all > scroll down to text messaging > on > then to clear the default settings

  now ask it which application you want to use again.