Cannot change the print settings

Similar Questions

• Cannot change the BIOS settings

  Hi all, I hope someone can advise on this? I have a HP Pro X 2 612 G1that I am unable to change the BIOS settings on. I can access the BIOS, but the options are grayed out. I have updated the BIOS to the latest version without the determination of the question. Any information is appreciated.  Thank you...

  Hi, I have found the BIOS can not be change, unless an administrator password is set for the BIOS for a system used at home I have never set a BIOS password and think it should be owners choice but that I'm just a grain of sand in this big world! Thank you all

• This folder is located in the windows folder: $NtUninstallKB36574$ It is not available and you cannot change the security settings.

  This folder is located in the windows folder: $NtUninstallKB36574$
  It is not accessible.  I can't change the security settings.
  It is the remains of an outbreak of the virus.
  I saw that on 2 client computers this course last 6 months.
  So, how is it possible for an inaccessible folder to administrators?
  How can I change the security settings to remove.
  After you run several virus cleaners, I'm pretty sure that the virus has disappeared.
  Ideas?

  You should be able to remove it from the command prompt in Windows Repair Mode.

• Cannot change the safesearch settings

  Original title:

  SafeSearch settings

  Why can't change the sharpness of safesearch under PC control change window

  Hi John,.

  1. What happens when you try to change the safesearch settings? You get the error message?
  2. Is research and results from Bing website suggestions option enabled? If this is not the case, turn it on and try to change the settings. This is because if the same is disabled, then the option in this window will be gray and you will not be able to make changes.

  Please update with the status of the issue.

• LaserJet MFP M277 PLC6: Cannot change the color settings, specifically in the category of graphs

  I need help on how to change the color for printer settings. I am unable to print graphics on forms, they come out as a solid black box. When I go into the color options I'm completely unable to change, there is no options to change anything: it only shows as neutral gray and black graphics.

  The printer has been the subject of assessment, and there are no exceptions to this topic. Please help.

  Your question is usually a driver problem.  Try to use pcl5 or postscript driver to see if one of them makes a difference.

• LaserJet Pro 200 M276nw: Changing the print settings

  I want to print in black only.  When the print dialog box appears, the ONLY option is standard. There is no color/quality Option or the Option advanced as indicated in the manual.  There is no manual control.

  When I open system preferences, as suggested, I get the screen which gives me once again NO parameters.

  

  Hello
  Follow the steps below to print using black ink only, these are accessible from the print itself, dialog not print & Fax:
  
  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to the product model to see all available parameters.
  
  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.
  
  3. Select Type/quality paper in the menu dropdown.
  
  4. you may need to click the triangle next to color Options of spending parameters, you will find the levels of gray or black in this dialog box.
  
  You can save the settings for later use by clicking preset > save current settings as preset... a used preset by default remains until you select any other preset.

  Shlomi

• I am Admin on my PC, but cannot change the display settings.

  I have vista home premium and I can't change my wallpaper. I am logged on as administrator and can change most of the other settings, but a box tells be that the administrator has blocked the launching of the display settings control panel. I don't think that I have never done this, not intentionally at least. I tried to use the parameters of Environmental Variables, but it's like a foreign language to me - I don't know what to do with it. I don't have time for this! I have a job to do. Does anyone know an easy fix for this?

  Hello wall14hm,

  Here is one link: http://windows.microsoft.com/en-us/windows-vista/Change-your-desktop-background-wallpaper which will help you in detail on how to change your screen background image (background). Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot change the screensaver settings

  Original title: __Locked (in gray) screen saver settings___

  Hello

  I just changed a new laptop with win 7. I have a little problem with screen saver which is defined in the field of sleep on white screen, set to 15 minutes and requires the password. Everything is more gray, so I have no possibility to change that.

  Can someone help me to unlock the screen saver settings (remove the grey shadow) so that I can customize my screen saver?

  Thank you

  Hi Baracus,
   
  1. are you able to click on the dropdown under screen saver?
  2 or it is dimmed as well?

   

  If this isn't the case, then select a different screen saver and try to change the settings.

   

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Sound problems on computer, cannot change the sound settings

  I had a long-standing problem in the audio settings of the Control Panel on Windows 7 where I can't change settings, configure anything or especially toggle of the devices. The options are there, but they have no effect when selected. Recently, I tried to connect my laptop to a TV, and as I could not set as the default audio device, I finally decided to try to fix things. I deleted and reinstalled the software Realtek my laptop and everything he has done is completely turn off my speakers, and all attempts to reactivate failed them. The unit displays in the control panel as a default active device, but claims of the taskbar that there are no speakers is connected, and if I click to set up the Realtek Audio, I have the same situation that before where absolutely nothing is happening.

  I tried troubleshooting sound problems, and all I get is the statement that an audio device is disabled, no attempt to fix or any option to enable. Apart from a system restore, that in general, I try to avoid, I feel that I have tried everything I can think of to fix this and only managed to make it worse. No help available would be appreciated to receive my laptop back to a functioning State.

  Model is a fickle Dell XPS L501X, if this is any help.

  I tried both of these methods several times without success, but since I found a result to this problem online. (Here: http://www.techsupportforum.com/forums/f217/solved-no-sound-the-unsolvable-problem-take-the-challenge-594113.html)

  I will stick also the solution here should someone stumbles on this page in the future trying to solve the same problem:

  Hi, go to start search and type cmd search will return the click right on cmd.exe and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Thanks for the help though, Yann!

• HP Folio 13 has password administrator (cannot change the bios settings)

  Im trying to change the boot order to USB key and it gives me "system disabled 76799886. Is it possible to boot usb or should I scrap it? Help, please

  Hello

  Try to enter: 69691208

  Kind regards

  DP - K

• You cannot change the display settings on the reference monitor

  I'm unable to change the display setting in the reference monitor.  right mow my only options are composite video and alpha.

  What do you want to take it?

  If you are referring to the scopes. They no longer exist.

  Now, its Lumetri: work/Lumetri extended space.

• How can I become an administrator I can change the print settings

  my printer cannot print from the computer, so I downloaded a new player, but he said I had to be an administrator to install. How can I become one.

  Hello

  1. What is the operating system running on your computer?

  2. your computer is on a domain?

  3A this works much earlier? If so, remember you have changed your computer?

  You log on to the administrator account to have administrative rights, or to check with the administrator of the computer.

  In addition, if the computer is on a domain you must contact your system administrator.

  Refer to this link and check if it helps: http://windows.microsoft.com/en-US/windows7/Why-cant-I-print

• OfficeJet Pro 8600 N911a: Change the 2 sides of the print settings by default on JO 8600 Pro using Mac El Capitan

  I can't find a way to change the default settings of my printer on 2-sided - I cannot change the print job, but not the default!  In addition, with the print order option page.

  Hello

  In any program, click on file > print to open the print dialog box.

  Once the selection of the required parameters, you should see the menu breast high Preset dialog box print himself.

  Kind regards

  Shlomi

• You cannot change the settings of UAC with the guest account

  adadadsadadsada

  You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.

• Change the printing WillPrint settings

  I see that the WillPrint event is raised after the user dismisses the dialog box print. I have a PDF file where I want to only allow them to print page 1. Can I use the WillPrint event and change the print settings as well as the first page is printed? Thank you very much.

  Rick

  As try67 says, the event does not work like that.

  WillPrint is exactly like that - he is fired when the user presses the Print button in the print dialog box, so at this time the printout will be no matter what you do with the event. and they have already made their choice on what is happening out of the paper tray. If JavaScript could intercept these choices it caused no end of problems.