Similar Questions

• Waterfalls of Beta 4 - cannot change the QML file

  Anyone else unable to edit QML files with the new Cascades Beta 4?

  I can edit in text mode, but the default editor is suspended the IDE when an existing QML file is changed.

  Yes I can. I don't have the QML preview because I use Win 8 64 bit, but the QML perspective opens.

  Have you tried a new clean rather than installing on Beta 3 installation?

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Cannot change the Zoneinfo file

  I had problems with El Capitan and decided to run a permissions repair script to see if it solved the problem. It came with two executable files that can not be changed. I looked on my first mac and the same files were not executable. I have a great difficulty to try to correct the incorrect files or copy the right files the first mac to it. I tried Sudo Rm, Chmod, Chown root. All attempts have been thwarted. What else can I do other that Reinstall from scratch?

  

  It's probably the new security SIP in El Capitan, which prevents make you these changes. You are right however that these files do not have x (execute) permission turned on.

  You could wait 10.11.4 and see if she arranges otherwise you could temporarily cut off SIP to enable to fix now, or as you say erase and reinstall.

• Cannot change the reading file attributes only in Windows XP

  When I view the folder properties, they all show the 'read only' as selected.  The selection is a greyed out tick.  When I uncheck this, change seems to be accepted but is not change.  View the properties immediately after that do change the same greyed tick is still there.  All other problems with it seem when a transfer of the user it XP files to a new Vista system.  This isn't the case here, because the files are all over my existing XP system.  How can I continuous change the folder attributes to have the 'read only' deselected.

  Hi BarryGray,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/cant-change-read-only-properties-of-files-in-XP/ef76dfee-0bf0-4D8D-8c12-acefe95ad38d

  I hope this helps!

• You cannot change the URL in a new tab

  When I open a new tab opens with it (www.trovi.com/?gd= & ctid = CT3320047 & octid = EB_ORIGINAL_CTID & = M8690A469 - 2B 12 - 490E ISID - B6F5 - 2FEA1F0D3E00 & SearchSource = 69 & CUI = & SSPV = & Lay = 1 & UM = 6 & UP = SPEAC0608F-A4FB-4D75-B66E-E5D6B7012B0C) I want to open it with Google Search, I have tried changing the about: config / browser.newtab.url, but it will not change, it does nothing.

  Favorite and use this.
  Download the Mozilla search reset {web link}
  This module is very simple: when installing, it backs up
  and then resets your search and home page preferences
  at their default values and then to uninstall. This
  affects the search bar, search bar URL, and the home page.

• Cannot change the export file

  Whenever I try to export my photos, I can't change the folder to export to. Currently the windows explore start Lightroom crashes. Windows Explorer opens and from that moment I can't do anything in Lightroom and the Eplorer. Lightroom must be closed via the Task Manager.

  Lightroom CC 2015.6.1

  Windows 10

  All updates installed

  What have I done so far:

  reinstalled Lightroom

  Reinstalled Lightroom and Windows

  Create a new catalog with only on picture in it

  Nothing helps.

  Thanks for the help

  Kurt

  Try to disable the GPU: Adobe Lightroom GPU troubleshooting and FAQ

  Also, be sure to use the latest graphics driver for your card. Use the download from the manufacturer, not from Windows Update.

• You cannot change the data file

  Unable to Alter Database Datafile

  Hi all

  Using Alter database datafile ' C:\Oracle\APP\ORADATA\...\USERS01. DBF' SIZE 100M;

  getting this error.

  SQL > Alter database datafile ' C:\Oracle\APP\ORADATA\...\USERS01. DBF' SIZE 100M;
  Error report:
  SQL error: ORA-01237: do not extend datafile 4

  ORA-01110: data file 4: ' C:\Oracle\APP\ORADATA\...\USERS01. DBF'

  ORA-27059: reduce file size

  OSD-04005: SetFilterPointer() failure, unable to read the file

  s/o-error: (OS 112) there is not enough space on the disk.

  01237 00000 - "cannot extend %s datafile.

  * cause: year Operating system error has occurred during resizing.

  * Action: Resolve the cause of the error of operating system and start the command

  I understand that the OS space is full and I guess this isn't specific Oracle error, but certainly an OS level error, someone could suggest me how to deal with the erasure of space, is it possible to erase and reuse the data files? Please suggest.

  Help out me

  Thank you and best regards,
  Cabbage

  You need create more space by deleting unnecessary files or narrowing of the files.

• Cannot change the .fla file

  Hello

  I'm trying to modify a .fla with flash cs3.

  When open it, the file does not play or watch as it should.

  Everything I do is change the links in the file (which I did easily), but the file isn't always look right.

  I had a developer friend to try it too, and he had the same problem.

  This is the site on a test url

  http://125.214.73.232/~sudscoma/

  And this is a link to the actual .fla file that can be downloaded:

  http://125.214.73.232/~sudscoma/source/header.fla

  It is perhaps because the file was made in one program other than flash?

  Thanks for your help.

  Geoff

  You are welcome.  Overall, I would say that the thing is without doubt possible to save her, although I can't promise anything.  Your should be able to remake the masks quite easily.  The buttons are still a mystery to me, do not have dug their very far.

• Cannot change the eps file

  I made a card using Illustrator last June, printing asked the card is done in .eps

  I now try to update the card file that I made so I can send it to a printer once again, however when I open the file now it acts as if the picture is a single object.  I've tried everything I can think of and I really need to be able to edit this file.  Any help will be greatly appreciated.

  Here is a link dropbox for file, could not understand how to reach via the forums.   https://dl.dropboxusercontent.com/u/45816769/STAR-front.eps

  Edit: added link dropbox

  Post edited by: triggirhape

  You are the GROUND unless you have a version I of the file. It is an image with no modifiable parts. Time to start over.

• Cannot change the .html file in dreamweaver?

  Why I can't change .html file in Dreamweaver CS 5.5 when it is not attached to a model?

  I've always been able to edit every other time that I open the file (since I built the site over two years ago).

  Now, whenever I try to edit it in Design view, no matter where I click in the file of the whole page gets a dark gray overlay and I can't get a cursor.

  I'm still able to modify the code directly, but I will not be restricted.

  The last thing I did last time I opened the file paste the Google Analytics code just before the < / head > tag. I did it to all the files on the site, but it's the only one that does not. I tried to get out of this code, but it makes no difference.

  I use a 6 month old Macbook pro.

  Can someone help me?

  In your stylesheet, you have-

  . Container {overflow: hidden; width: 100% ;}}

  .container2 {overflow: hidden; width: 646px; margin: 0 10px 0 0}

  Try right-clicking on the page in Design view, and then selecting view item > full and see if that helps.

• Cannot change the .png files in Fireworks8 recorded in other graphic programs

  I've had several different people send me .png files saved in other graphics programs and they are not editable in Fireworks 8. Sometimes I can see the different layers and sometimes not but when I see the layers, when I click on the different parts, that they are highlighted but police data, color, etc. does not appear in the Inspector properties so I can't change it. The different layers are not locked. Is there something I need to enable/disable?

  Mac OS 10/04/11

  Fireworks 8

  PNG files created in other programs are not editable. They have been flattened. It is true, even if they have been saved layer by layer. Fireworks is unique in placing special data at the head of a PNG file which allows the document to remain fully editable. I'm not aware of any other graphic software that does the same thing.

• Cannot change the InDesign file?

  Hello

  I recently got an InDesign file, and I need to update a few photos.  The problem is when I click on any tool and move it to the document, I get an icon of a pencil with a line through it, and I can't do any changes?  Is there a simple setting I can change to fix this?

  Thank you

  Andy

  The layer is locked. Open the layers panel, click the lock icon.

• Cannot change the url in a new tab

  My Firefox just put update to 41.0

  But for some reason when I create new tab is wrong on my page set more.
  I had a quick glance about: config and now where I use it to say things it is there more.

  I just want to go straight to http://www.google.com when open new tab rather than view more pages.

  Any suggestions on the new 41.0 on how to make new tab opened directly on site, I'm after?

  New tab override (browser.newtab.url replacement)
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-override/

  With Firefox 41 (and later versions), it is no longer possible to customize the
  page displayed in a new tab by the evolution of the browser.newtab.url preference
  in the about.config. Due to the fact that the hijackers abused the
  preference in the past, Mozilla has decided to remove (see bug 1118285).
  Fortunately, by removing it, Mozilla has also introduced a new API to bring
  This feature to life as an add-on. This module allows the user
  Choose a page in a new tab.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!