Cannot change the solder mask

Similar Questions

• Cannot change the subnet mask of eCard in 7.1.3 (opensuse 11.4)

  Had this problem before with 7.0 on suse 11.2, but I forget how I "fixed it". This is quite irritating considering I found nothing on google about this topic. I hope it's just my ignorance with the software and not a real problem, but when I try to change a vmnet as Host-only adapter, I have no option to change the subnet mask. I've seen tutorials where you just have this option, but I did not.

  I use a very simple script to make changes to the Infrastructure virtual VMware which are not available on Linux hosts via the virtual network editor in Linux in VMware Workstation version.  Note that there may be other ways, but this is what worked for me.  Also note that changes to the value of a parameter that is not a correct value will cause failures, and that's why I have the scrip, run the commands with the talkative and check the ifconfig and VMware Network Status before and after you made the changes and you will see that in the attached script.

  If you do not have what it takes to use the attached script then in a Terminal root or with sudo:

  sudo /usr/bin/vmware-networks --stop -v
  sudo cp -p /etc/vmware/networking /etc/vmware/networking.backup
  sudo cp -p /etc/vmware/vmnet1/dhcpd/dhcpd.conf /etc/vmware/vmnet1/dhcpd/dhcpd.conf.backup
  sudo cp -p /etc/vmware/vmnet8/dhcpd/dhcpd.conf /etc/vmware/vmnet8/dhcpd/dhcpd.conf.backup
  sudo nano /etc/vmware/networking
  sudo nano /etc/vmware/vmnet1/dhcpd/dhcpd.conf
  sudo nano /etc/vmware/vmnet8/dhcpd/dhcpd.conf
  sudo /usr/bin/vmware-networks --start -v
  sudo /usr/bin/vmware-netcfg
  sudo /usr/bin/vmware-networks --start -v
  

  In the attached script, you will see the following note about the use of writing, or why this is done manually:

      # NOTE: Load the VMware Virtual Network Editor and then click the OK button.
      #    This is being done for two reasons, one is to validate the settings
      #    and the other is to create a new DHCP_CFG_HASH in the networking file.
      #
      #    Be sure to review the 'Current Status after editing...' for any errors.
  
  echo
  echo  Starting VMware Virtual Network Editor...
  echo
  sudo /usr/bin/vmware-netcfg
  

  As I said there may be other ways and VMware is unfortunately very tight secretive about what they do the document to be disclosed to the public, which is unfortunately very little.  It is so absurd that the version of Windows is not this limitation but I guess I would really be surprised since removed altogether VMware VMware Player for Linux virtual network editor and does not install it for the VMware Player for Windows even if it's in the Windows Installer Package. Go figure!

• Masks of brightness - cannot change the areas 'masked' by themselves

  I try to use luminosity masks in CS 5 Windows 7. I can create masks (there are enough tutorials on this part of the process) but when it comes to the use of curves to lighten/darken each mask, the entire image is affected. When I click on the BW cookie for the settings, a layer that adaptation is created, but the curves icon does not appear as I've seen and read about.

  
  

  In addition, when a mask is clicked on the RGB channel area, the new layer does not seem to align with the selected masks (1 light, 2 lights, etc.).

  
  

  My photography is mainly the work of railway and the sky is often a problem with too much light.

  
  

  I used Nikon but now have an Olympus L10... photos of both of them are good but want to change for all around goodness.

  BW cookie

  What is that supposed to be?

  the curves icon does not appear as I've seen and read about.

  The settings panel is open?

  In addition, when a mask is clicked on the RGB channel area, the new layer does not seem to align with the selected masks (1 light, 2 lights, etc.).

  You seem to try to verbally explain what could more easily be explained / showed issuing some screenshots.

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• Cannot change the Google search bar

  In Safari, I go to Google.com and do a google search. So far so good.

  Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

  I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

  Safari 9.0.2 (11601.3.9)

  OS X El Capitan 10.11.2

  Mac Mini (late 2014)

  A

  Please see below:

  Cannot change the Google search criteria in Safari

  B

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.

• Error: Windows cannot change the password when attempt to set a password to connect to the Windows XP computer.

  Original title: Windows cannot change the password.

  I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.

  With our thanks

  Elizabeth

  Hi Elizabeth,.

  You can follow this link & check if the problem persists:

  Impossible to change the password for the administrator account in user accounts in Control Panel

  Hope the helps of information.

• Cannot change the font color on the desktop icons

  I am running windows vista. I can't change the font as in windows xp. No matter if the background is dark or the police is always black... Help!

  Hello

  Thanks for posting the question in Microsoft Answers.

  I apologise for the inconvenience.

  Unfortunately, you cannot change the font color of desktop.

  Because desktop wallpaper images have different colors, it is easy for the colors of unreadable fonts if they are on top of the same color in a background image to display. For example, a black font on top a dark part of the background image or a white font on a white part of a background image.

  The desktop icon fonts are dynamic and show white on dark background and change in white with a shadow effect black on a light background.

  In previous versions of Windows, it did not matter what color you chose to fund policies, some would still make invisible because of the background color of a desktop wallpaper. The user was constantly moving icons around the desktop computer to another colorful area where the police could be read. This was the source of a large number of complaints from users asking for a policy that was still visible, regardless of the color that was behind the police.

  However, you can change the theme and see if that helps:

  Change desktop theme:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Hope this information helps. Let us know if you need additional assistance. We are happy to help you.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.