Cannot charge PHOTOARTMASTER on Windows Vista. Initially, he had run on Windows XP. Unable to contact the owner of this product company because they have closed.

Similar Questions

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• Cannot log on to Windows 7 after passage of the field to the Working Group

  Windows 7 Pro x 64

  I tested the Windows Server software, so I've been using the user account is a domain administrator account. Went back to the task force, forgetting that I had disabled the local Admin account and deleted my local computer account. Now I can't log in with credentials... Any ideas?

  Windows 7 Pro x 64

  I tested the Windows Server software, so I've been using the user account is a domain administrator account. Went back to the task force, forgetting that I had disabled the local Admin account and deleted my local computer account. Now I can't log in with credentials... Any ideas?

  Please note that this information is only for the use of to regain access to the system that you are allowed. These steps are not tolerated or supported by Microsoft or one of their staff and have no consent of any person of Microsoft or relationship to one of its intellectual property, it is a practice recommended or better recover password. That being said, if you don't know the system, it is illegal and you will face criminal charges, execution of these actions or worse in a professional environment which you are not the administrator. This is a hacking method, so you must have a prior consent or authority legal or rights on the system that you compromise. It is only for the purpose of peer education in the technologies of Information about learning and has no intention to provide malicious operations.

  Basically... If you are caught using it when you shouldn't be, you are busted and yourself! Microsoft do not have it as a recommended practice of password recovery... then you're on your own for any damage you do to the operating system for which is supported is in favor.

  There is not much to him... that you copy CMD to SETHC... with a backup of SETHC to replace the original SETHC to cover the backdoor.

  Get a linux boot CD, I use backtrack live cd bootable.... (DOES NOT WORK WITH ENCRYPTED DISKS) Use the shell! =) http://www.backtrack-linux.org/

  Note also that this does not work for domain controllers.

  Start on the Live of Backtrack distribution

  Open a shell (terminal) also known as the command line for Linux interface.

  Create a directory to mount the NTFS partition that has your Windows Installation.

  mkdir/mnt/directorynamehere

  Mount the partition device/dev/sda or sda1 or the sda2 know partitioning for your system... sda1(partition 2) sda (partition 1)... etc.

  Mount-t ntfs 3 g/dev/sda/mnt/directorynamehere o - force

  Navigate the paths... They are case-sensitive. This is the = linux)

  CD/mnt/directorynamehere/WINDOWS/system32

  Copy a backup of Sethc.exe and replace sethc.exe with cmd.exe

  CP sethc.exe sethc.exe.bak

  CP cmd.exe sethc.exe

  Reboot the system... to the login screen, press SHIFT 5 times. Sethc.exe is more commonly known as "sticky keys".

  NET user administrator * / Active: Yes

  Enter the new password of administrator to the guest and you connect with the administrator account to the login as usual prompt after the closure of the command line.

  Once again, you can get in trouble serious to do it in a professional environment... This should be the last resort for sensitive recovery times. Keep this in the laboratory or at home... You hold yourself is legally responsible for your actions... but it is the way of the ninja around the use of a recovery disk to repair the local computer user passwords. This only works on Local PC. Don't try this on a domain controller...

  Technology is dominated by two types of people: those who understand what they do not and those who manage what they do not understand. -Archibald Putt (Bill Putt)

• Windows cannot complete the installation "Windows is unable to complete the installation. Please reinstall.

  Needing extra space, I bought a new 500 GB western digital drive. I removed my old drive, installed the new and inserted my windows 7 professional 64 bit cisk. Booted from the cd and installed windows. After crossing it spins the facility and shut down to restart, I got a message tht says "Windows is unable to complete the installation. Please reinstall. I did it twice with the same result.

  What could be wrong. Thank you.

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1 are you install windows 7 operating system of the Windows full version Setup disk or recovery disk?

  2. where did you get the installation disc?

  3. you try to reinstall the old disk operating system?

  I suggest you to see the link and see if it helps.

  Windows 7 installation problems: frequently asked questions: http://windows.microsoft.com/en-IN/windows7/Windows-7-installation-problems-frequently-asked-questions

  If so please answer us, we can help you better.

• Error code: 80070490 (Windows is unable to check the updates)

  I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

  Hello Pstrjohn,

  Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

  When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large

  I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large RAW from a Canon 5 Ds R. What should I do?

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I'm in charge of a non-profit that uses Adobe Creative Suite 5. I have the software. but no product key. They want to have this facility on a new computer. I don't mean the software on the computer that works and not being able to get it insta on wreck

  I'm in charge of a non-profit that uses Adobe Creative Suite 5. I have the software. but no product key. They want to have this facility on a new computer. I wouldn't destroy the software on the computer that works and not being able to get installed it on the new computer. Help, please.

  Tony

  To reinstall the software, you will need the serial number. Please see this link:quickly find your serial number.

  Guinot

• 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

  6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

  Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

  You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

• Code 38 - Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory.

  My monitor driver displays a yellow fault icon in Device Manager.  Okay, the Windows driver is installed to update controls and says it's the last and correct driver, but he is not able to load.  Several reboots, uninstall/reinstall etc., do not make this work.

  Is there a way to identify what this "previous" Forum, it's that it refers to and a way to force his removal?
  Any tool give more details about the cause of this problem of Code 38?
  It is a new machine, Win7 64-bit, SP1.

  Thanks, I had already read a lot of answers to this question even where people say 'just run the troubleshooter', but is making the assumption that it is in fact an option of troubleshooting on the pilot.  In my case, there was no.

  This is a new PC with a fresh new install of the operating system of the OEM, but they did not have my monitor when you install the operating system.  The problem here is the value default Windows drivers have been installed and refused to be uninstalled, whatever my install the appropriate driver.

  in any case, found the solution I was looking for, just couldn't remember what to look for at the time: twist the Device Manager for a full view of the devices more [http://technet.microsoft.com/en-us/magazine/ff184583.aspx]

  There were 3 different monitor drivers installed by Windows that were not deleted after that right has been installed.  The parameter DEVMGR_SHOW_NONPRESENT_DEVICES let me delete them.

• "Windows is unable to complete the installation. To install Windows on theis compuiter, re-run the installation. »

  Got the "upgrade kit" update to Windows 7 for 64-bit to a 64-bit Vista OS. Has made the Upgrade Advisor, enlists Dell first, me Deauthorize Itunes - done, uninstall my printer - in fact, Dell Tools uninstall - made, said, all good, run Windows 7 - has done and, now, I'm on a restart loop. I called Dell, complete scam: they want $269.00 to "software". Read all articles about MS and Dell work together to bring '7' to the end user and the end user obtained just watered.  How to exit this loop of reboot? Widows 7 ran completely and looked at things would happen, then I received the following message: "Windows cannot complete the installation. To install Windows on this computer, run the Setup again. "PC - i7, 8 GB, 1 GB vid, AVG paid version and cannot go back to my Vista OS!  Tried using restore... no good.

  You will probably be able to break out by pressing the top and bottom keys management during the first part of the black screen reboot.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP