Cannot communicate with BK 8500

Hello

I installed the drivers FOR the series BK85xx (labview 8.5), and I try to run the examples included with the download.  Nothing works.  When I run the VI, it works, but it doesn't seem to do anything.  Even if I disconnect the instrument, I have the VI runs without any errors.

I have not modified the screw somehow, and I put my instrument according to the instructions on the main screen of VI (= 9600 Baud rate, address = 0, no parity)

I checked to make sure I'm on Com1, and I am.  What Miss me?

Have you tried with Get ID.vi (of LV85XX drivers/utilities /): open visa - GetID.vi - to close?

JM

Tags: NI Software

Similar Questions

  • computer cannot communicate with over 8600

    My 8600 Officejet Plus works fine on a wireless network for about a year, but after restarting the computer yesterday morning, I get the message "...". cannot communicate with the printer.  I tried all the suggestions below without result.  I can access page ews from the printer to the computer and I get my apps on the internet every night. I have Ran the network to the printer and all past test.  The Network Setup page shows the printer is connected and ready for the correct ip address.  I ran the HP print and scan doctor and you can see that everything works.  I also ran the troubleshooter in Windows and it showed no problem with 'the printer is ready.  I unplugged the router, printer and restarted Windows.  I removed the printer via the "devices and printers" window, as well as the HP software.  I reinstalled the software, connected the printer and run the wireless configuration.  I've updated the ip address on windows.  All to nothing does not.  Any help would be appreciated.

    Running Windows 7 Home Premium

    Belkin N router is

    In fact, I found the problem.  It seems to run a malicious program to the startup disable Norton anti-virus and changed several keys in the registry that prohibits the computer to communicate as well as Outlook unauthorized access to my POP3 account and who knows what.  I managed to uninstall Norton, then re - install a newer version.  This enabled Norton run a quick scan before restarting.  After re-booting, Norton has been disabled again.  I used Norton Erase to analyze and repair the registry that solved the problem.  Immediately after re-boot after the last scan and fix the network Windows Test Page that announces the printer has been installed on persistent organic pollutants.

    Thanks for you quick response, however.  I suspect a virus when I tried, without success, to open Norton in order to disable the firewall and couldn't.

  • SE error message saying the printer cannot communicate with the computer cause of blocked files.

    Original title: DRIVER of PRINTER BLOCKED

    A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

    I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

    SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

    I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

    http://support.Microsoft.com/mats/printing_problems/

    If the problem is not resolved, contact Dell customer service.

  • My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

    My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

    and also installed the latest driver by using the Software Update Wizard software.

    That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

    The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

    I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

    If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

    Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

    MalwareBytes AntiMalware

    SUPERAntiSpyware

    Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

    Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

    Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

    Uninstall all software from Dell to control panel > Add / Remove programs

    Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

    Close all running applications (anything with an icon on the taskbar).

    Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

    After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

  • MG6120 - cannot scan error "cannot communicate with scanner.

    Hi, I have a Mac Book Pro with OS 10.10.5 (Yosemite).  I have the Canon MG6120 printer.  Since I updated to Yosemite, I'm more able to scan using the MP Navigator ex software  I get the following error message:

    "Cannot communicate with the scanner.

    Cable may be disconnected or scanner may be turned off.

    Check the status.

    Scanner driver will be closed.

    2.1.0.

    The only way I can scan is by using the touchpad on the printer and saving the scan on a USB key.

    I went to the page support and downloaded the latest drivers, but he has not made a difference.  I need to remove the printer and re - add again?

    You will appreciate greatly any help or advice.

    Thank you very much

    Alice Berman

    Hello.

    If the printer is used via the USB port, make sure that the printer is connected directly to your computer.  Avoid using USB hubs or extension to connect devices.

    If the printer is used with wireless, please proceed as follows to save your scanner to work wireless on Mac:

    1. click on the "Canon IJ Scan Utility" icon on the top of your screen and choose "display settings." (Located near the clock, looks like a scanner open with an arrow below). For the latest operating systems, the program can be located in the Canon Utilities listing applications.

    2. in the next screen, make sure that the network version of the printer is selected instead of "do not use". The network version will be a long series of numbers next to him.

    3. click on "Scan-of-operation-panel-settings".

    4. a new window should appear, make sure that the printer is selected, and then click OK.

    5. click OK to exit the utility.

    Once done, do the following:

    1. open the Application folder.

    2. open Canon Utilities.

    3. open MP Navigator.

    4. Once opened, click on the "Settings/preferences" button at the bottom.

    5. in the menu drop-down "Product name", select the Network Scanner.

    6. click OK at the bottom.

    Once done, try to scan from MP Navigator.

    If you continue to have difficulties, find more help contact us.

  • CanoScan 88ooF error report, "cannot communicate with scanner.

    When I try to use my scanner I get the error report, "cannot communicate with scanner, make sure it is plugged and truned on.» When I go into Windows Device Manager I can see it, and when I click on the buttonn properties, it says that the device is functioning properly. I downloaded the latest version of the software driver etc and I uninstalled and re installed again but I still get the same error report.

    I use Windows 7, 64-bit version.

    Above is I get the error message.

    After two days of fruitless efforts, I found my own solution. I downloaded and installed VueScan x 64 and it works a treat. I think that the problem I've been is due to the fact that the scanner driver is 64-bit and the programs that install are 32-bit, even if the scanner driver works perfectly fine 2 bit programs do not see.

  • HP 6830: HP 6830 cannot communicate with printers

    Hello

    wehenever I send you a print through my laptop, I get a dialog box indicating that the computer cannot communicate with the printer. (It's also seems to indicate a correction option that is not fix something).

    However, the print job is done perfectly.

    It dose not happen when an an email impression is made.

    How can I get rid of this dialog box?

    Thank yoy

    Hello

    Thank you for using the HP Forums.

    Can you try using a TCP/IP port?

    Creating a TCP IP port

    1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
    2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
    3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
    4. Enter the IP address of the printer.

    This video resource will show you how do:

    Create & port use TCP IP

    Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

    Let us know if it works

  • Error message when printing - Communication not available, cannot communicate with the computer

    Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

    I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

    uuggghhhhh!

    flustered2,

    You recently reinstall the operating system? If so, have you installed the drivers in the order?
    How to download and install drivers in the correct order

    First run delete print jobs to remove all print jobs stuck in the queue.

    Unplug the printer.

    Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

    Restart your computer.

    Now you can install the printer using the Dell Printer 924 disc.

    Link to the patch/drivers(if needed) is to...

    Dell 924 Photo-All - In - One Printer owners thread (W7)

    Don't forget the programs anti-virus and firewall will block communications.

    Also try this tweak...

    Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

    Go to the section USB controller, and then click the plus sign +.

    Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

    Restart your computer.

    Rick

  • My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

    When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

    Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

    I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

    Hi ChristineKrause,
     

    Here are some links that might help you:

    Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

    Advanced troubleshooting tips for General USB for Windows XP problems

    Try the steps listed in the items mentioned above and see if that helps you solve the problem.

  • The Dell printer cannot communicate with the Dell computer.

    It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

    Jesse,

    Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

    Please answer these questions to get more clarity-

    (1) what are the other steps in troubleshooting tried by you so far?

    (2) other changes on the computer that I should know about?

    In the meantime, I have you refer to items offered on the Dell website - troubleshooting

    http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

    You can also have a look at the Microsoft article as well-

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Get back to us with the results.

  • HELP: What router supports VLAN? -I wish both groups cannot communicate with each other.

    Hi all

    I have 5 wireless devices must connect to the router.

    I want to divide it into 2 groups:

    That is to say, 1, device A, B, C, group 2, device D, E.

    I would like two groups cannot communicate with each other.

    I've heard, it can be done by VLAN, is e2500 can adapt to what I need?

    What about EA3500 and EA4500?

    I use G wireless, is what it means that ea4500 is out of choice even if it supports VLAN?

    Thank you all!

    Evil

    Thanks for the clarification for the OP

    FWIW

    is this an alternative to routers that do not support of VLAN, to do what you want

    http://www.SmallNetBuilder.com/lanwan/lanwan-HOWTO/32486-how-to-segment-a-small-LAN-using-tagged-VLA...

  • Windows cannot communicate with primary dns server

    Hey everybody.  I have a home network, wired PC, 1 wifi 1.  WiFi works fine.  wired network printers work well, other computers (laptops work fine both wired and wireless.)  I have a PC (VISTA), which now gives me the "windows cannot communicate with primary dns server.  This has happened a couple of times, but a reboot fixed things.  Once I had to change primary dns server from automatic to 208.67.222.222 (who got to this site), it worked.  Now, the same error, but nothing works.  I have tried in both directions between the DNS auto numbers listed here, also, have tried the following:

    ipconfig/flushdns
    ipconfig/registerdns
    netsh interface ip reset reset.log
    netsh int ip reset resetlog.txt

    and had windows try to reset the DNS of countless times.  Nothing works.  The upgrade to W7 eventually will correct this problem?  Another question, my wife insists on the use of AOL software (I know, I know), even if all that she uses to is by e-mail.  She says she loves interface.  A chance that caused this problem?

    Hello

    1. have there been recent changes to the system before the show?

    2. the problem occurs only with specific applications?

    Method 1:

    Follow the link and follow the steps proposed by Shekhar S and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

    Method 2:

    Follow the link below and follow the steps. Check if it helps.

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

    http://support.Microsoft.com/kb/928233

    I also suggest you to run the command in the command prompt and check where the Windows Vista computer is pointing to DNS and DHCP.

    ipconfig/all

    Post back with the results in this thread.

    Let us know if it helps.

  • The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

    The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

    1. ensure that the printer is powered.

    2 disconnected then reconnected the power cable from the printer.

    3 unplugged then replugged the USB cable.

    4 checked Windows Firewall setting to ensure the communication of the printer is not block.

    5. restarted my computer.

    Please help me solve this problem.

    Thank you!!!

    Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

  • Cannot communicate with the first DNS Server (169.126.63.1)

    Hello
    I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

    Here is my information

    Hello

    1. have you done any software or hardware changes to your computer recently?

    To work with this issue, I would say that you try the methods below to resolve this issue.

    Method 1:

    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Method 2:


    Step 1:

    Let us reset TCP/IP and check.

    To reset TCP/IP stack to go to this article and follow the instructions.
    http://support.Microsoft.com/kb/299357

    Step 2.

    1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
    2. make sure that you are in the installation - basic configurationcategory.
    3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
    4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
    5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
    6. scroll and click ' Save Settings '.

    Step 3.

    1. click Startand then clickControl Panel.
    2. go in network and sharing Centerand then click onchange adapter settings.
    3. right click on Local area connectionand selectProperties.
    4 Select Internet Protocol Version 6 , and then clickProperties.
    5. click on get automatically a DNS server address, then pressOk.
    6 select automatically an IP address to get.
    7. repeat the steps for Internet Protocol version 4 as well.

    Also visit these links:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Network adapter problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Hope the information is useful.

  • Canon PIXMA MP160 error message 'cannot communicate with scanner.

    I have a Canon PIXMA MP160, who worked during the scanning of the printer on my computer. Now, I get an error message "cannot communicate with scanner. Installation scanner no longer works. The Canon site suggested looking in the Windows directory for a file named ' USBSCAN. SYS, but my research has not found it

    Installation scanner said that all the files are in place until it reaches the end.

    I received an update of windows on 31/10/2011. It works

Maybe you are looking for