Cannot complete assessment
1302296 (2988) - winsat\logging.cpp:0815:-BEGINNING 2011\7\8 19:23:17 -
1302296 (2988) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 4c20263a-656c-45de-8bb9-56f5900c1ff7
1302296 (2988) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
1302514 (2988) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
1302545 (2988) - 4585: Watch dog system active
1302545 (2988) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
1302545 (2988) - winsat\main.cpp:3115: an error occurred trying to read partial assessments from the data store. Comprehensive assessment running
1302577 (2988) - winsat\main.cpp:2505: > DWM doesn't work do not.
1302577 (2988) - 2470: > EMD service will be restored to the exit.
1303216 (2988) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
1303232 (2988) - 2793: > power policy saved.
1303497 (2988) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
1303497 (2988) - winsat\main.cpp:2814: > policy set to maximum power.
1304339 (2988) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
1304339 (2988) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
1304339 (2988) - winsat\main.cpp:1775: > Run Assessment features
1304589 (2988) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
1320064 (2988) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 1791890
1320064 (2988) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
1320064 (2988) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
1327459 (2988) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
1334619 (2988) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
1343901 (2988) - d3d\dx9misc.cpp:1030: the D3D assessment was stopped by the user.
1344572 (2988) - winsat\main.cpp:1948: > Cancel received, waiting for d3d 10000ms cancel
1344572 (2988) - winsat\main.cpp:1958: > d3d assessment properly cancelled.
1344603 (2988) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 1791890
1344603 (2988) - winsat\processresults.cpp:1241: jumping graphic reading video time check.
1344603 (2988) - winsat\processresults.cpp:1253: check limited to jump StdDefPlayback.
1344603 (2988) - winsat\processresults.cpp:1265: check limited to jump StdDefPlayback.
1344603 (2988) - winsat\processresults.cpp:1480: > partition disk writes in register 0
1344681 (2988) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"
1344681 (2988) - winsat\main.cpp:2855: > state restored power.
1344681 (2988) - winsat\main.cpp:2870: > Successfully reenabled EMD.
1344884 (2988) - winsat\main.cpp:2896: > SystemRoot Composition
1344900 (2988) - winsat\watchdog.cpp:0311: Watch dog system shutdown
1344900 (2988) - 4909: > exit value = 3.
358474 (1764) - winsat\logging.cpp:0815:-BEGINNING 2011\7\8 20:20:45 -
358521 (1764) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 54637c2b-6b4d-4563-a9e6-568c1ab9b496
358521 (1764) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
359972 (1764) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
360003 (1764) - 4585: Watch dog system active
360003 (1764) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
360003 (1764) - winsat\main.cpp:3115: an error occurred trying to read partial assessments from the data store. Comprehensive assessment running
360019 (1764) - winsat\main.cpp:2505: > DWM doesn't work do not.
360019 (1764) - 2470: > EMD service will be restored to the exit.
360221 (1764) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
360221 (1764) - 2793: > power policy saved.
360549 (1764) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
360549 (1764) - winsat\main.cpp:2814: > policy set to maximum power.
361563 (1764) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
361563 (1764) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
361563 (1764) - winsat\main.cpp:1775: > Run Assessment features
362062 (1764) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
378193 (1764) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 1831620
378193 (1764) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
· You get the error message?
I suggest you follow the steps below:
Follow method 4 in the article below and check if the problem persists:
Run the tool File Checker system to troubleshoot missing or corrupted system files follow the steps in the following article below to run the System File Checker:
The package install to icloud for windows 10 cannot complete. Is an update on the way?
The latest Version is the 6.0 and most likely a new Version does not solve your problem.
It would be nice if you could provide the full error message-> if this is a Windows Installer Package error please check if you could install all Windows updates.
Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)
Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.
- Download the full Firefox installation program and save the file to the desktop
- Start the installation by double-clicking on the desktop icon
- Download the full Firefox installation program and save the file to the desktop
cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem
Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name
Go to network and sharing settings and check the name of the previously defined network.Try the following steps to do the same thing:a. right click on the Network icon located on the bar spots.b. click on open network and sharing Center.c. under view your information network base and installation connections check information (network name).d. try another name in order to set up a network.Reference:I hope this helps!
- What operating system is installed on the computer?
- Have you tried with another name?
Cannot complete the logoff Hotmail recently without deleting cookies & cache, what has changed? I don't intend to do that each time only.
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
I have Windows XP. Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error." I can always eventally the record via a temporary file, but it's very messy. "A file permission error" - what on Earth is this? And what should I do to get things to normal? Ron Davis, Newcastle N.S.W..
When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key. A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen. At this point, log in as any user with administrator privileges. After successfully login, you should be able to right click on a folder or file and select "Properties". When the Properties screen, you should have a 'Security' tab at the top.
Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders. (Start-> Run-> "cmd") and then you can use the cacls command. The Calc command syntax can be found here:
or you can type: cacls /?
"Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.
Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?
Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.
1. what makes you think that there are unidentified, firewalls running on the computer?
2. what exactly happens when you try the home network configuration? You receive an error message?
3. what exactly happens when you try to ping any computer on the network? Error message?
4. what operating system is running on this computer? Also after return from the edition of these operating systems?
See the following articles that might help you.
How to troubleshoot a network home in Windows XP
5 steps: how to set up your network wireless home
Windows Vista cannot complete the update of windows
Since the last update July 2016
no error message, just perpetually "check updates".
everything I start the update of windows
Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.
Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9. Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month. Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v126.96.36.199 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS
When I try to run Microsoft Fix it automated troubleshooting services, I get - "we're sorry, but we met an unexpected problem and cannot complete this diagnostic solution." I ran before with great success, but it did work for awhile now. I can't understand how uninstall/reinstall, or how to solve why it does not work for me any more. I run Vista Home Premium. This problem has happened to others?original title: Microsoft Fix it does not work
Are your logged as administrator?
What I wanted was otherwise, what issues are having you? Why do you need to run a Fixit? This could
It does not lead to why the FixIt.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
I would also like to launch SFC and Chkdsk to ensure that corruption is disabled.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
Perhaps an installation problem.
Spotlight utility Windows Installer CleanUp Utility
Description of the Windows Installer CleanUp utility
Windows install 4.5 Redistributable
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072. I also ran system update readiness tool. No luck. Anyone have any ideas on how to solve this problem?
I had a very very long list of updates from several years ago, now I see only about 60. OS says I have SP2 yet, but it does not look like it. What happened to the hundreds of updates? I have updates of the .net Framework and part of last week.
I have a Dell PC with Vista Home Premium. Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv. I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized. The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?
You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
will have need a HDCP compatible graphics card and a TV/monitor taking support this
The kit Hauppage offers is substantially the same as I told you.
clear QAM availability varies according to the cable company. most begin to encrypt
> The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"
I just down 144 loaded on a picture of a CD. I saved them in my photo files. I popped in a cd to try to burn a cd, but it keeps telling me that it cannot complete the format. If anyone can help. I've never burned a cd in my life. I use Windows Vista Home Premium.original title: need help to burn photos to a cd.
Perhaps the following links will help you get started:
Windows Vista - Burn pictures or videos to a CD or DVD
Windows Vista - burn a CD or DVD
Windows Vista - which CD or DVD format should I use?
Windows Vista burn a CD or DVD in Windows Media Center
Try to upload the photo to save under and this message comes up cannot complete task error 8007ffff. Can you help me
no windows vista
Using Google Chrome?
If so, disable or uninstall and then try to save again.
If that's not the answer, take a look at the last line of this forum.
error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)
We have recently launched a Microsoft Answers for Office forum:
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Hi, I have a Packard Bell with Windows Vista laptop
The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.
I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
Or y at - it another way I can complete the installation?
Thank you very much
you have little choice
1. attach the graphics card
2 and contact the manufacturer because it is their recovery process, NOT microsofts
you already know that you can not complete the process of recovery of manufacturers in safe mode
and we cannot help you with their recovery process
good luck with it
Maybe you are looking for
Hello everyone. I have an Iphone MC 16 giga Silver for almost a month and I found an annoying flaw, the volume keys and market / stop move a little too and I feel an annoying noise caused by the present. The feature is still normal but it's embarrass
I can't get sound on my LCD TV connected with cable HDMI with my Qosmio G40. Help please.
When I go to the interface of the software (on my desktop), instead of being able to set up a scan and save it to a document, I now get a message that my installation of the software is incomplete. He tells me that I have to connect via USB to compl
I installed the new wireless card. Sometimes, when Iconnect to web pages my screen suddenly goes black. I have to remove the battery and recharge the machine again. It happened3 times. Can someone had the same problem or know what the problem. The po
My Outbox is suspended (swirling circle) with a large attachment... It's been 4 days now and beneficiaries become the subject of the email, but no attachment every few hours. I tried airplane mode turn off etc. and not good. Help!
My Outbox is suspended (swirling circle) with a large attachment... It's been 4 days now and beneficiaries become the subject of the email, but no attachment every few hours. I tried airplane mode turn off etc. and not good. It seems that I can not s