Cannot complete the connection due to a bad user name or password
Hello. I have a strange problem. I am beginner with VMware products. I installed ESXi on HP proliant 180 gen9 6.0.
After that, I used converter stand alone to migrate the linux server. Still was very good, everything works. But the next problem emerges after that two or three time - when I try to connect to remote ESXi it telling me "cannot close connection due to a bad username or password." No matter how I connect via Vsphere Client, SSH, or simply click on the link "Browse data in the host inventory warehouses" in the browser. In addition. I can connect with the same login\password using usb keyboard connected to the server. Password change has no effect. It allows only a reset to default. And then it starts to pitch up and anywhere. I read somewhere that the problem occurs if the set dns and host name on ESXi, I put not DNS so that only the host name. Another problem not defined RAID controller, but I don't think it is interconnected, maybe I'm wrong? I'd appreciate any ideas and help.
Hello. Ty for answer. Problem solved. I started to use same keyboard as ESXi server option. After the default US in US int problem has resolved. I don't know why it works with default US for a few days before.
Tags: VMware
Similar Questions
-
Receive errors of VRM subject officer in vCAC 6.1 on a random/intermittent basis.
I read the other posts documenting similar errors but in almost all of these positions, these errors arose following a request by commissioning has failed, a misconfigured in vCO vCenter Server Plugin interface or some other connection failure distinguishable. In my case, this condition is intermittent (at least it seems to be) and resolves in the end. I have no problem of supply of virtual machines on one of my endpoints configured in vCAC and, as far as I can tell, the network appears to be stable.
At this stage since there seems to be no significant or negative impact for the health of the entire system, (for aesthetic reasons only), I usually end up the purge of these error messages in the SQL DB Table. I wonder if anyone else has this problem or clues as to what may be the cause of this?
Here are some of the typical error log file.
[05/06/2015 11:54:01] [Debug]: this exception has been taken:
System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)
at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)
at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)
at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)
at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)
at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)
at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)
[05/06/2015 11:54:01] [Error]: <? XML version = "1.0" encoding = "utf-16"? >
< Boolean > false < / Boolean >
This exception has been taken:
System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)
at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)
at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)
at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)
at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)
at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)
at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)
Ron thx.
Indeed, it turns out that our network has been unstable with intermittent packet loss and the routing of the shortcomings... The main culprit seems to have been Channeling of Virtual Port (VPC) behaves poorly or badly configured on a physical switch uplink... VPC, in our case, was created to supplement our vSphere Teaming and failover policy settings.
-
Hi guys,.
It is the latest attempt to address this issue the nice way.
We have 3 guest running VMware essentials 5.5 with Veeam B & R (recently updated v9)
I use a unit of vCenter hosted in one of the ESXI servers. Has joined the field - but no authentication SSO or AD has never been setup for it.
Since yesterday, I am unable to connect to no machines with my password local root - or ESXI and vCenter. I almost use the same password for the hosts and vCenter (except the vCenter last character that is special) passwords have not been changed for 400 days. (I can remember in the past I have problem with my account lockout and I had to do something in vCenter turn it off - so I guess that this has been done)
I am guard on getting "cannot complete the connection due to an incorrect username or password" when I try to connect via vSphere client, web browser, SSH or the physical server.
Funny but my server of Veeam speaks to vCenter as nothing happened. Veeam management shows 400 days since the last change of password for root. Also, I am able to rescan vCenter successfully. If I ask for identifying information another user from the credentials manager in Veeam he dismisses them. So somehow Veeam is still talking to vCenter...
It's just incredibly odd that two separate passwords for ESXI and vCenter are no longer works...
Any feedback is greatly appreciated!
Apparently, was my old brain!
Just enter the password once again with a slight difference and it worked. @
-
Cannot complete the connection due to an incorrect username or password
Hello
I installed a new free esxi 6.0 server. The installation is successful, but when I try to connect to the VMware vSphere client keeps giving me this error:
Cannot complete the connection due to an incorrect username or password
Username and password are correct
Can someone help me?
THX
Just a guess. Are you a password with special characters without selecting the required keyboard layout (i.e. leaving us / English)?
You are able to connect on the DCUI (console)?
André
-
Web Access: Login failed due to a bad user name or password
What is the default user name and password to connect to the Web 2.0 Server access. I had it installed on XP x 64 and was able to access. Installed Vista Ultimate x 64 and I am not able to connect to web access with my user name and password for XP.
The user is the local administrator for your host PC user.
-
ESXi host does not have the full connection due to an incorrect user name or password.
Hello
I need to provide the username and password while reconnecting Esxi host, but with the lines below, I can't succeed. Help, please.
Game-VMHost-connected state - VMHost 10.50.56.151,10.50.56.65,10.50.56.107,10.50.56.168 | Game-VMHostAuthentication - root username - password "trustno1" - $false JoinDomain
Thanks LucD., however, I tested is the only way to connect back the vmhost to vcenter. I have not found any cmdlet.
-
"Word cannot complete the save due to a file permission error."
I have Windows XP. Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error." I can always eventally the record via a temporary file, but it's very messy. "A file permission error" - what on Earth is this? And what should I do to get things to normal? Ron Davis, Newcastle N.S.W..
When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key. A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen. At this point, log in as any user with administrator privileges. After successfully login, you should be able to right click on a folder or file and select "Properties". When the Properties screen, you should have a 'Security' tab at the top.
Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders. (Start-> Run-> "cmd") and then you can use the cacls command. The Calc command syntax can be found here:
<>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >
or you can type: cacls /?
"Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.
HTH,
JW
-
error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)
Hello
We have recently launched a Microsoft Answers for Office forum:
http://answers.Microsoft.com/en-us/Office/default.aspx
Best wishes!
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
A bad user name or password has been specified.
Hi all
I use JDeveloper 11.1.1.3. I have a request that I need to manually deploy using an EAR file. I went through the process of creating a JAR, WAR and respectively the EAR and the deployment of each by itself. I also disabled the
Auto Generate and synchronize the weblogic - jdbc.xml during deployment descriptors
in the application properties to avoid the error that occurs when you try to install an EAR file. And I added:
-Djps.app.credential.overwrite.allowed = true
to avoid the second error I get when trying to access the database.
When I try to deploy an application without all security great. However, when I have security in my application I am not able to make it work. I receive the error:
A bad user name or password has been specified.
I think I must download jazn-data users and roles of jazn-data in a certain way and include in the EAR file. But I can't figure out how.
Can someone please help?
Thank you
Mohamed
Impatience after only a minute? A weekend?
Read this http://www.oracle.com/technetwork/issue-archive/2012/12-jan/o12adf-1364748.html article that shows you how.
When you deploy a time the first ear you can migrate users to the wls stand alone or you add users and rules to the wls by hand.
Timo
-
the wpad.home to the dsl router server requires a user name and password
I recently downloaded some files for Silverlight and Microsoft Microsoft Security Update. Now I started to get this message when I start my computer that says "the wpad.home of the dsl router server requires a user name and password", there also a warning that this information is requested on a non-secure server. I hit Cancel and the window disappears and everything works, but I'm afraid that I picked up a virus and I don't want to put the password of my router in this screen. Is this really a thing of Microsoft, or do I have some type of virus? I run all my virus software and it found nothing, but I'm still worried. Is any way to get rid of him?
I have a Windows 7 64-bit system.Thank you.Beverly GrahamIt's Malware... Thank you for the help :)
-
vSphere Client: bad user name or password
Hello
I'm new on the vSphere server and it seems that I made my first big mistake.
I installed a 6 of VMware ESXi server and I am not able to connect to the admin with the vSphere Client account more.
If I use the same credentials to log in via ssh or PowerCLI, I can connect and everything works. But when I use the vSphere client it says that the user name or password is incorrect.
I tried to add a new user in the shell but when I try to connect with this user via the vSphere Client, I get the message that the account does not have permission to open a session.
I also tried to use "pam_tally2 - user = root - reset" to reset the counter of failed connections, but it always says 0 failures and doesn't change anything for me.
Change the admin password (in the shell via passwd) doesn't help either.
Is it possible to grant permissions for connection the Client vSphere for users outside of the shell or the PowerCLI?
Or is it possible to "wake-up" or "unlock" my admin account?
Thanks in advance,
DerpDerpson
list of permissions of the system esxcli [root@VMS2:~]
Main is the group role role Description
---------- -------- -------- --------------------------------------------
false dcui rights to full Admin Access
root of false full Admin access rights
VI-admin00 Admin access rights full false
vpxuser access rights Admin full false
Nagios ReadOnly false details of the objects, but not to make changes
VI-user00 ReadOnly false details of the objects, but not to make changes
set of permissions of system esxcli - r = Admin-i = nagios
list of permissions of the system esxcli [root@VMS2:~]
Main is the group role role Description
---------- -------- -------- --------------------------------------------
false dcui rights to full Admin Access
Admin full false Nagios access rights
root of false full Admin access rights
VI-admin00 Admin access rights full false
vpxuser access rights Admin full false
VI-user00 ReadOnly false details of the objects, but not to make changes
It's an example of how to grant rights of ssh.
You can try with your test user?
Brgds
-
Unable to connect to a dial-up connection does not require a user id and password.
It's kind of a weird question. I have a new vista machine, and a user must always connect to a Government to start the connection via modem. In XP, we used hyperterminal and everything worked well. As hyperterminal is not available under Vista, we spent some time trying to get the vista switched from work. He composed, negotiates, but when it comes to 'verification of the user name and password' connection failed after that right. He has not set password to connect, the password entered only after you connect and you select the option to connect.
Now, I copied Hyperterminal from a XP machine and was able to connect. But using hyperterminal, none of the shortcuts that I do can be used. They all come with "could not read session file: c:\. "c:\session.ht".ht." I changed the location of the shortcut, the location of the hypertrm.exe, departure to the target location, etc... The only way to get a recorded session to run is to open hyperterminal, and then click file, open and point to the location of the session.ht file. It works, I suppose, but its not just a lot more, especially since this is not until the last the default location that you opened a file from.
Ideally, I would like to use the connection to start menu. Is it possible to force the connection does not send a user name and password? He always says "verifying username and password" even though I left the empty boxes. Or is this another problem with Vista and dial upward? Any help would be greatly appreciated.
Thank you.
I thought about it... a bit, I've found a workaround.
You can call hyperterminal for the prompt, using:
Hypertrm c:\myfile.htYou open hyperterminal as we are used to having open when you click the .ht file in XP.
Knowing this, you can create a shortcut to hyperterminal which calls the hypertrm.exe AND the .ht file
Mine is:
C:\Windows\System32\hypertrm.exe c:\Windows\System32\ohip.htBloody Government and their former systems eh?
I hope this helps!
Dave
-
Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name
Hello
- What operating system is installed on the computer?
- Have you tried with another name?
Go to network and sharing settings and check the name of the previously defined network.Try the following steps to do the same thing:a. right click on the Network icon located on the bar spots.b. click on open network and sharing Center.c. under view your information network base and installation connections check information (network name).d. try another name in order to set up a network.Reference:I hope this helps! -
XDB user name and password to access the page configuration EPG on a pluggable database APEX
Hello
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
Connected to the PDB, the registry says:
Name of the ID Version State
------------ ----------------------------------- ------------ ----------
APEX Oracle Application Express 5.0.0.00.31 VALID
I want to configure the EPG for this PDB.
I did the following (in this order):
(1) race: apex_epg_config.sql
(2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port
(3) race: change the anonymous user account unlock;
(4) run:
Start
() DBMS_NETWORK_ACL_ADMIN.append_host_ace
Home = > ' *',
As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)
principal_name = > "APEX_050000"
principal_type = > xs_acl.ptype_db));
end;
/
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
FLOWS_FILES EXPIRED & LOCKED
APEX_050000 EXPIRED & LOCKED
OPEN APEX_REST_PUBLIC_USER
OPEN ORDS_PUBLIC_USER
OPEN APEX_PUBLIC_USER
OPEN APEX_LISTENER
ORDPLUGINS EXPIRED & LOCKED
ORDDATA EXPIRED & LOCKED
ORDSYS EXPIRED & LOCKED
ANONYMOUS HAS EXPIRED
ORDS_METADATA EXPIRED & LOCKED
I used the documentation:
https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386
When I run from the browser:
http:// < IP address of the server >: 8080/apex
I get the messge:
"APEX request a user name and password XDB"
Does someone has encountered this situation in a PDB file?
Thanks in advance for any information.
Thanks and greetings
Hi Patrick,
Laury wrote:
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
I want to configure the EPG for this PDB.
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
ANONYMOUS HAS EXPIRED
The problem is the ANONYMOUS account has expired.
Reference: Re: XDB username and password
I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?
And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)
Kind regards
Kiran
Maybe you are looking for
-
Are there plans for an Android version of thunderbird?
I already use thunderbird on windows, it would be great is if there is a version of Android.
-
All of a sudden I can't open attachments in word on my emails
I've always been able to open attachments on e-mails, but all of a sudden, I can't.
-
Hello I have a Z3 Xperia and because a staged, I needed to recover was a very old message, sync all my messages on my phone. I normally have set to keep only last month. Expensive, so my internal storage is now hovering around the use of 70% and fro
-
Hi everyone, someone knows how to fix this bug?I applied a slideshow widget (full screen) in a page.Everything was fine...But at some point, the slideshow widget does not appear in Design view.It shows very well when editing or exporting.It is not hi
-
HP 300 manualWhere download us the manual of the product for the 300 hp all-in-one
We are looking for a hp 300 manual c4662-9001 product that we do not have one with us to downlaod or quick installation guide or the box has been opened. Can someone help? It is much appreciated Nels & Ali