Cannot complete the installation of the printer

I tried several ways but have been unable to install my printer, (Olivetti Boumat90 20) on this laptop. Tried to download the driver from site Internet Olivetti, but the download is not completed. Can anyone help? The printer worked perfectly with my old computer which was also Windows XP so I don't understand the problem here.

Thank you


> Tried to download the driver from site Internet Olivetti, but the download is not completed
May I ask why you post here in the forum of Toshiba?
It s an Olivetti printer and you speak to someone from support of Olivetti.

You cannot perform the download of the driver may be that is the reason why you could not install the printer on this laptop

Tags: Toshiba

Similar Questions

  • Windows cannot complete the Installation in Mode safe

    Hi, I have a Packard Bell with Windows Vista laptop

    The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
    I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
    Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.

    I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
    Or y at - it another way I can complete the installation?

    Thank you very much


    you have little choice

    1. attach the graphics card

    2 and contact the manufacturer because it is their recovery process, NOT microsofts

    you already know that you can not complete the process of recovery of manufacturers in safe mode

    and we cannot help you with their recovery process

    good luck with it

  • Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

    HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

    How to exit this loop?

    OK, here's what I discovered.

    When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

    At the command prompt, type: bcdedit [then press enter]

    so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

    This put the loop I lived and finished restoring Windows 8

  • Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to RES

    Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.

    Error 201 & 205 & 206 & 207 or several U43 errors


  • Cannot install the printer and windows update error 80070026

    Original title: Registry Editor not work cannot install the printer

    I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

    Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
    for example:C:/windows/log/cbs/cbs.log

    I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.


    I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

    also receive error installer that it is already running
    install GUI is unresponsive

    error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

    I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.


    1. What is the serial number and model of the printer?
    2. What are the failed updates?
    3 have there been any changes made on the computer before the show?

    I suggest you try the steps to solve the problem with the installation of printer.

    Method 1:
    Run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows

    For more information, see the links:
    Find and install printer drivers
    Search for a printer, the manufacturer Web site
    Add or remove a printer

    I suggest you try the steps to fix the problem with Windows Update.

    Method 2:
    Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

    Method 3:
    Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 4:
    You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    For more information, please see the links.

    Problems with installing updates
    You cannot install some programs or updates

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (
    How to back up and restore the registry in Windows

    Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

    Hope this information is useful.

  • P1102w - cannot find the printer


    I'm unable to print using a wireless connection.

    the printer is p1102w.

    operating system is MAC OS 10.10 Yosemite

    Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

    I tried the solutions on your support site, but nothing helped.

    For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

    All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

    I tried to move the printer closer and further away from router. No results.

    No web proxy is related to my network.

    To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

    But some time the problem reappears.

    It's really frustrating. Help, please.

    Hi @xopot ,

    I see that you have problems printing via wireless network. I would like to help you today.

    Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    Configure a static IP address for the printer.

    The printer is not found during Installation wireless.

    Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

    Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name


    • What operating system is installed on the computer?
    • Have you tried with another name?
    Go to network and sharing settings and check the name of the previously defined network.
    Try the following steps to do the same thing:
    a. right click on the Network icon located on the bar spots.
    b. click on open network and sharing Center.
    c. under view your information network base and installation connections check information (network name).
    d. try another name in order to set up a network.
    I hope this helps!
  • HP envy 4500: PC cannot find the printer

    I ran the installation disk and printer tells me that I am connected. Wireless light is stable. PC cannot find the printer.


    I'm glad to hear that your problem is solved and everything works fine now.

    Good day!

  • Cannot install the printer HP C4500 on Windows 7

    Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

    Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

  • I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

    I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

    Can someone help me with this?

    Thank you.


    If this does not help, there is a very long thread here, which may include other suggestions-->

  • I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

    Original title: new printer

    I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

    Start by going here-->

    If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

    • Click on the ORB start and go into devices and printers.
    • Select (click) the icon of your Epson printer.
    • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
    • Click the "Drivers" tab on the print server properties dialog box.
    • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
    • In the context menu, select "Remove driver and driver package" and click OK
    • Click Yes, and then delete
    • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
    • Install the driver and the software using the file that you downloaded earlier

    At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

  • Cannot find the printer

    Product) 1 name and number: photosmart Hp 5510, (2) installs operating system: Windows 7 64-bit, (3) error message: cannot find the printer {after you click on the option called NETWORK in the connection Option}.

    Please if I'm quick on the suggestions

  • "Cannot install the printer. Operation could not be performed. error 0x000003eb.

    I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?


    What is the exact model of the printer number?
    I suggest you to check if the printer is compatible with Windows 7:
    If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer.
    Connect the printer when it prompts.

    If the problem persists, contact the printer manufactrer for assistance

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Cannot complete the connection due to an incorrect username or password


    I installed a new free esxi 6.0 server. The installation is successful, but when I try to connect to the VMware vSphere client keeps giving me this error:

    Cannot complete the connection due to an incorrect username or password

    Username and password are correct

    Can someone help me?


    Just a guess. Are you a password with special characters without selecting the required keyboard layout (i.e. leaving us / English)?

    You are able to connect on the DCUI (console)?


  • The Finder cannot complete the operation because some data in the 'AdobeGermanSpeechAnalysisModels1All.dmg' cannot be read or written. (Error code - 36)

    Tried to download CS4 and got this message

    The Finder cannot complete the operation because some data in the 'AdobeGermanSpeechAnalysisModels1All.dmg' cannot be read or written.

    (Error code - 36)

    Need help to resolve this.

    Please see:

    Error "licensing for this product has expired" | CS4, CS5

    Error 1603: A fatal error occurred during installation

    Troubleshoot installation with the Setup logs. CS3, CS4

    I hope this helps.


    Megha Rawat

  • Cannot complete the operation of network against My Oracle Support

    The weirdest thing that happens to me, new installation of 12 c, with the correctly filled out proxy settings, with proxy test works successfully, with the CCR download at MOS, I am not able to connect to console 'EM MOS, reception:

    Cannot complete the operation of network against My Oracle Support. Please check the network connectivity to the Oracle Support Site.

    eMoms.log is filled:

    + 2012-07-18 11:30:13, 537 [EMUI_11_30_13_/console/mos/signin] ERROR handlers. SigninHandler logp.251 - SigninHandler0: impossible to establish a proxy connection: 407 Proxy authentication required.
    oracle.sysman.emmos.common.exception.EMMOSException: 0: could not establish a proxy connection: 407 Proxy authentication required

    Seems half of 'EM is aware of proxy setting and the other half is not.
    I open SR but the named person will be able to help me because apparently, he doesn't understand a thing I want to talk. I hope that I will find someone who is willing to help out here.

    Can you use the same domain in proxy page you found in the trace: "Infrastructure to browse" & give it a try.

Maybe you are looking for

  • Camera work is not on Windows 10

    Hi, after installing Windows 10 on some PCs, I have no access to the camera on them in Skype. If I open the camera app, it works and not exceeding not black comes from the camera when using Skype

  • error 2131 on Equium A200 iTunes

    Hello My first attempt ever to post to a forum, please nice to me! I know this has been covered before but I do not see how to fix the error. When you try to burn to a disc from itunes, I get error 2131. I have a Satellite A200 equipped of a TST corp

  • Driver webcam open fail on Satellite A300-1MC

    Whenever I try to start my integrated webcam (Chicony Camera Assistant Software) the message "driver Webcam open fail." Please restart camera or computer. "is displayed on the computer.First of all, I do not understand what it means and then I reboot

  • ENVY of HP TouchSmart m7-j010dx N: reinstallation of the operating system

    I have insalled Windows 7 on my laptop. However, I would like to reinstall Windows 8 (or 8.1) is it came with. How can I get a copy of the binary files?

  • Laptops Z61

    Can someone tell me if Win 2000 is compatible with the dual core systems? Thank you!!