Cannot complete the process of backround with force as an administrator. Even with administrator privileges. More details inside.

Similar Questions

• Re: Cannot complete the process of recovery on my laptop satellite

  I have a Toshiba Satellite running the home edition of Windows XP Home edition. A ran the CD recovery last night, having run before and had no problems. But this time... after it executes without error, he asks at the end to remove the CD and press a key to continue.

  What I did. The system then boot see the Toshiba home screen and then goes to a small cursor blinking in the upper left corner of the screen. Cannot cursor mover, the screen is black in the background.
  CTRL + ALT + DEL doesn't work.
  Press the power button the same scenario.
  A ran the CD recovery again, the same scenario as above.
  Then started from the Linux CD, shows my HD and content etc. A ran chkdsk since the Linux CD.
  No problems.

  The recovery CD is wrong?

  Satellite you need exactly?
  During the execution of recovery facility you have seen regular activity on the screen?

  I think the problem is Linux. Try to rewrite the MBR before you start the installation of recovery.

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

• cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

  Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

  Hello

   
  • What operating system is installed on the computer?
  • Have you tried with another name?
  Go to network and sharing settings and check the name of the previously defined network.
   
  Try the following steps to do the same thing:
  a. right click on the Network icon located on the bar spots.
  b. click on open network and sharing Center.
  c. under view your information network base and installation connections check information (network name).
  d. try another name in order to set up a network.
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
   
  http://Windows.Microsoft.com/en-us/Windows7/products/features/networking
   
  I hope this helps!
   

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Cannot complete the registration process of the CS6 due to the error of the Adobe ID

  I just installed 13 copies of the CS6 in our studio, 12 with success, but we have problems. The registration process takes place without problem using our certificates is Adobe, the problem occurs when we have to enter the Adobe ID at the end of the process. The sappear two option, sign up later or log in now. Once we click sign in now it's just getting the spinning wheel of boredom, can't do anything. of course, the problem is it says that you have 7 days to do so before the application unusable.

  So what is the problem and how can I fix this and what should do with all of this in an Adobe ID? We have legal licenses, why do we also need an Adobe ID to complete the process

  Graham

  I had the same problem and contacted Support several times before finally found it must be my setup "corporate network".

  This is partly because Adobe is now require that use you your Adobe ID to save CS6.  See the link below:

  Adobe ID required for version beta of Photoshop CS6 and upcoming CS 6 products

  http://blogs.Adobe.com/OOBE/2012/03/Adobe-ID-required-for-Photoshop-CS6-beta-and-upcoming-CS-6-Prod.html

  After several conversations 'live' with Adobe support they gave me a link to directions for a work around.  The problem was our "corporate network" configuration, so what happens on every computer that you install CS6 on when you are connected to a network of "enterprise".

  To work around the CS6 registration on a "network of the company" error, you must do one of the following values: disable the proxy server, disconnect from the internet completely to use the offline Activation option or use another internet source external to complete registration CS6.

  Adobe technical support directed me to a forum on how to disable the proxy server, but really all you need to do is disconnect your internet, source and then you can generate the codes that are required to complete your registration with the option to enable offline. It worked for me, I'm ready now.

  See the links below:

  Support Forum link technique Adobe

  http://forums.Adobe.com/thread/1005256

  Offline activation
  https://exception.licenses.Adobe.com/AOES/AOES/v1/T1?locale=en

• Windows cannot complete the Installation in Mode safe

  Hi, I have a Packard Bell with Windows Vista laptop

  The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
  I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
  Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.

  I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
  Or y at - it another way I can complete the installation?

  Thank you very much

  Hello

  you have little choice

  1. attach the graphics card

  2 and contact the manufacturer because it is their recovery process, NOT microsofts

  you already know that you can not complete the process of recovery of manufacturers in safe mode

  and we cannot help you with their recovery process

  good luck with it

• Stop simultaneous managers to complete the process ORA-01000

  Dear all,
  
  Error as follows
  
  Stop simultaneous managers to complete the process or use specific ports operating system commands to complete the process.
  Job number: 638
  Job number: 639
  February 1, 2013 10:46:36 - ORACLE 1000 get_status error
  
  The SQL statement being executed at the time of the error was: & SQLSTMT and wJob number is: 642
  
  Failure of the call to the PingProcess function in the AQCART cartridge.
  Systematic FNDSM cannot complete the concurrent processes with simultaneous process ID & CPID and
  process ID 7537140 operating system
  
  The SQL statement being executed at the time of the error was: & SQLSTMT and was executed from the file & ERRFILE.
  February 1, 2013 10:44:34 - ORACLE 1000 get_status error
  
  Cause: get_status failed due to the ORA-01000: cursors open maximum exceeded.
  
  Once again, after some time, I used to get this error
  
  Cause: get_status failed due to the ORA-01000: cursors open maximum exceeded.
  
  The SQL statement being executed at the time of the error was: & SQLSTMT and was executed from the file & ERRFILE.
  February 1, 2013 11:12:15 - ORACLE 1000 get_status error
  
  Cause: get_status failed due to the ORA-01000: cursors open maximum exceeded.
  
  The SQL statement being executed at the time of the error was: & SQLSTMT and was executed from the file & ERRFILE.
  Failure of the call to the PingProcess function in the AQCART cartridge.
  Job number: 651
  
  Suggestions are welcome
  
  Concerning
  Surinder Singh
  
  Published by: Surinder Singh February 1, 2013 11:16

  Surinder Singh says:
  Hello

  The problem above is resolved after you run the CMCLEAN.sql script.
  The script available on Metalink

  Concerning
  Surinder Singh

  Published by: Surinder Singh on February 28, 2013 15:23

  Thanks for the update and share the solution.

  Kind regards
  Hussein

• Cannot complete the update of iOS for my iPad, the "the activation server is temporarily unavailable" message keeps popping up? Suggestions as to how I could complete the activation?

  Suggestions as to how I could complete the activation of my iPad after iOS update?

  I tried for 2 days now to complete the update of iOS on my iPad. Everything was going fine until activation, as I tried to continue, the message "your iPad could not be activated because the activation server is temporarily unavailable" keeps popping up. If anyone has suggestions as to how I could complete the process?

  Thank you.

  I have the same problem with you. There is no suggestions now. It seems that the problem exists only on the IPad 2

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Driver management has completed the process to add the HdAudAddService Service

  At windows 8, just upgraded to 8.1 windows and sound does not just work. I refreshed the pc, the sound seems to come back but then then after 10 hours, the problem came back use a toshiba satellite pro just 1 year and it is in perfect condition until I upgraded to 8.1 windows and this is the message that appears on the sound properties

  Driver management has completed the process to create the Service HdAudAddService of ID device Instance HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0.

  Driver management concluded the process to install the driver hdaudss.inf_amd64_70c6945afa5f06b5\hdaudss.inf for the Instance ID of device HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0x0.

  Method 1 worked 100% here!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-management-has-concluded-the-process-to-add/04857a5a-5c8e-4790-9D24-5f4c40591a0e

  YES!

  No need to uninstall my drivers!

  I worked in the Services and tinkered with him and he started etc but change for local totally worked!

  YES!

  Thank you!

• Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  deppie,

  Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

  Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

  http://www.recoverytoolbox.com/buy_illustrator.html

  the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

  http://www.Illustrator.fixtoolbox.com/

  I remember, the first is for the victory and the second is for Mac, while the third should be both.

  Here are some pages about yourself the wrong with it:

  http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

  http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

• vCenter + 3 guest - root - cannot complete the connection due to an incorrect username or password

  Hi guys,.

  It is the latest attempt to address this issue the nice way.

  We have 3 guest running VMware essentials 5.5 with Veeam B & R (recently updated v9)

  I use a unit of vCenter hosted in one of the ESXI servers. Has joined the field - but no authentication SSO or AD has never been setup for it.

  Since yesterday, I am unable to connect to no machines with my password local root - or ESXI and vCenter. I almost use the same password for the hosts and vCenter (except the vCenter last character that is special) passwords have not been changed for 400 days. (I can remember in the past I have problem with my account lockout and I had to do something in vCenter turn it off - so I guess that this has been done)

  I am guard on getting "cannot complete the connection due to an incorrect username or password" when I try to connect via vSphere client, web browser, SSH or the physical server.

  Funny but my server of Veeam speaks to vCenter as nothing happened. Veeam management shows 400 days since the last change of password for root. Also, I am able to rescan vCenter successfully. If I ask for identifying information another user from the credentials manager in Veeam he dismisses them. So somehow Veeam is still talking to vCenter...

  It's just incredibly odd that two separate passwords for ESXI and vCenter are no longer works...

  Any feedback is greatly appreciated!

  Apparently, was my old brain!

  Just enter the password once again with a slight difference and it worked. @

• Cannot complete the connection due to an incorrect username or password

  Hello

  I installed a new free esxi 6.0 server. The installation is successful, but when I try to connect to the VMware vSphere client keeps giving me this error:

  Cannot complete the connection due to an incorrect username or password

  Username and password are correct

  Can someone help me?

  THX

  Just a guess. Are you a password with special characters without selecting the required keyboard layout (i.e. leaving us / English)?

  You are able to connect on the DCUI (console)?

  André