CANNOT COMPLETE THE RECOVERY

Similar Questions

• Equium L20 - cannot complete the recovery procedure - disk error

  Hello

  I have a laptop Equium L20 and whats happened is, during a recovery of product, he gets to 25% then emits an error at me and stops working.

  Now when I turn on the laptop, I get the Toshiba screen, then nothing.
  I was informed that my drive is probably broken and I now no operating system but I am a complete computer novice so don't know how it is.

  I took the laptop to PC world a few years ago and they run a recovery of product but I did not my drive, so I want to know is, is it possible to run recovery without the disc?
  (seems to me just don't forget the sound by pressing a few buttons)

  If so, how?
  And if not what someone have any suggestions as to how I can restore the computer?

  Thanks in advance

  Hello

  > during a recovery of product, sometimes about 25% then emits an error at me and stops working.

  As you mentioned, possibly recovery disk is defective, broken, or similar, this could be the reason why the CD/DVD drive is not able to read the disc and the installation breaks upward.

  You cannot get this phone without the recovery disk! It is an old series laptop and it does not support the HARD drive recovery process, as do other mobile most recent.

  If you have only two ways to install the Windows operating system; you need to use the Toshiba recovery disc (which seems to be broken) or you can install the operating system by using the Microsoft Windows XP disk.

  If install you the operating system using the disk of MS original then you need to install the drivers of Toshiba which are placed on the European driver Toshiba page (look in the archives).

  PS: maybe you could try to burn (copy) the recovery disk using another computer.
  In some cases of the different drives are able to read scratched discs.
  If you want to be successful and if you want to be able to copy the recovery disk, you can then use the new disk in order to restore the operating system on your computer satellite phone.

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• cannot complete the recovery after a hard disk replacement

  HP Pavilion m9340f Vista Home premium.

  original hard drive & replacement two seagate barracuda SATA

  After the disk crash, replaced the hard drive.

  Using Vista Home Premium SP1 recovery disks (disk w / extra) HP, has begun to recovery.

  First step was to run the tools, test drive.  Seek and scan spent.

  Put 1 in the drive and powered drive, then on it.

  Bridged system restore and went to recovery.

  All the drives used, including the additional disk.  Everything is OK

  reformat & reinstalling original content OK

  "Complete recovery" & restart OK

  Opens the window with 'startnet.command', 'building the partition' appears

  With "HP Flexbuild 2.0"appears, and then restart

  "Windows Setup" starts.

  copy of files OK

  extension of the files OK

  installation of OK features

  installation of updates OK

  end of installation - it is here that the window with the msg

  "windows setup cannot configure windows to run on a hardware on this computer.

  Is there a way to know what caused Setup to stop?

  I have no idea where to go from here.  Seagate, told me to "call HP.  Support HP told me to buy another machine, although I had to pay for the support.  This forum is my last hope.

  Can someone PLEASE suggest something.  I can't just throw this machine.

  RESOLUTION.  I had an old Western Digital 1 TB drive that wasn't Advanced Format.  Worked like a charm.  The machine retrieved and updated now.

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Windows cannot complete the Installation in Mode safe

     Hi, I have a Packard Bell with Windows Vista laptop

     The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
     I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
     Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.

     I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
     Or y at - it another way I can complete the installation?

     Thank you very much

     Hello

     you have little choice

     1. attach the graphics card

     2 and contact the manufacturer because it is their recovery process, NOT microsofts

     you already know that you can not complete the process of recovery of manufacturers in safe mode

     and we cannot help you with their recovery process

     good luck with it

  8. Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

     Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

     I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

     [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

     deppie,

     Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

     Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

     http://www.recoverytoolbox.com/buy_illustrator.html

     the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

     http://www.Illustrator.fixtoolbox.com/

     I remember, the first is for the victory and the second is for Mac, while the third should be both.

     Here are some pages about yourself the wrong with it:

     http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

     http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

     http://kb2.Adobe.com/CPS/500/cpsid_50032.html

     http://kb2.Adobe.com/CPS/500/cpsid_50031.html

     http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

  9. cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

     Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

     Hello

      
     • What operating system is installed on the computer?
     • Have you tried with another name?
     Go to network and sharing settings and check the name of the previously defined network.
      
     Try the following steps to do the same thing:
     a. right click on the Network icon located on the bar spots.
     b. click on open network and sharing Center.
     c. under view your information network base and installation connections check information (network name).
     d. try another name in order to set up a network.
      
     Reference:
     http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
      
     http://Windows.Microsoft.com/en-us/Windows7/products/features/networking
      
     I hope this helps!
      

  10. "Word cannot complete the save due to a file permission error."

      I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

      When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

      Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

      <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

      or you can type: cacls /?

      "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

      HTH,

      JW

  11. Cannot complete the home network implementation to include this computer as it can not be seen on the network.

      Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

      Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

      Hello

      1. what makes you think that there are unidentified, firewalls running on the computer?
      2. what exactly happens when you try the home network configuration? You receive an error message?
      3. what exactly happens when you try to ping any computer on the network? Error message?
      4. what operating system is running on this computer? Also after return from the edition of these operating systems?

      See the following articles that might help you.
      How to troubleshoot a network home in Windows XP
      http://support.Microsoft.com/kb/308007

      5 steps: how to set up your network wireless home
      http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  12. Windows Vista cannot complete the update of windows since July 2016

      Windows Vista cannot complete the update of windows

      Since the last update July 2016

      no error message, just perpetually "check updates".

      everything I start the update of windows

      help please

      Hi emiquestion:

      Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

      Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
      ------------
      32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
      HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

  13. Cannot complete the update of security for Windows Vista (KB2961072)

      I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

      I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

  14. I have photos on a CD burning problems. I jumped in the CD to try to burn a cd, but it keeps telling me that it cannot complete the format.

      I just down 144 loaded on a picture of a CD. I saved them in my photo files. I popped in a cd to try to burn a cd, but it keeps telling me that it cannot complete the format. If anyone can help. I've never burned a cd in my life. I use Windows Vista Home Premium.

      original title: need help to burn photos to a cd.

      Perhaps the following links will help you get started:

      Windows Vista - Burn pictures or videos to a CD or DVD
      http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

      Windows Vista - burn a CD or DVD
      http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

      Windows Vista - which CD or DVD format should I use?
      http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

      Windows Vista burn a CD or DVD in Windows Media Center
      http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  15. error when trying to save to a flash drive "word cannot complete the save due to a file permission error.

      error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)

      Hello

      We have recently launched a Microsoft Answers for Office forum:

      http://answers.Microsoft.com/en-us/Office/default.aspx

      Best wishes!

      Lisa
      Microsoft Answers Support Engineer
      Visit our Microsoft answers feedback Forum and let us know what you think.

  16. Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

      HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

      How to exit this loop?

      OK, here's what I discovered.

      When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

      At the command prompt, type: bcdedit [then press enter]

      so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

      This put the loop I lived and finished restoring Windows 8