Cannot conect Dell Inspiron Samsung TV via an HDMI cable?

Similar Questions

• Z580 help: connect to the TV via a HDMI cable

  I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:

  This application cannot open
  The screen resolution is too low for this application to run.
  Change your screen resolution

  Seems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!

  I'd be really grateful if someone here would be able to help / tell me what to do! ^^

  Thanks in advance!

  All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.

• Unable to connect Sony KDL60EX500 Widescreen 60 "LCD for laptop Asus UL50V via an HDMI cable.

  Original title: Sony KDL60EX500 Widescreen LCD Plug and Play 60 "questions

  The first time I have connected my laptop Asus UL50V to my via a HDMI Cable TV it immediately conne.cted.  I do not use it for several months then tried to connect to them, that I have a very difficult time. I tried to stop the laptop and the TV power off and waiting to initialize never the combination of turn HDMI cable with no luck. I have don't same st screen at the Sony manufacturer's instructions, no luck.

  My laptop has a processor hybrid two VGA and Intel 4 chip family series

  Help, please.

  Hello

  1. what happens when you try to connect to TV laptop Asus UL50V?

  2. what operating system is installed on the computer?

  Reference:

  Connect your computer to a TV:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

• trying to connect my ps3 to my laptop via a hdmi cable

  Im trying to connect my ps3 to my laptop via an hdmi cable, but nothing happens

  What can I do?

  Hi mezilla,

  Please see the post below with a similar problem and fix possible:

  http://boardsus.PlayStation.com/T5/PlayStation-3-General/how-to-connect-PS3-to-Windows-Media-Center/m-p/38640141

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Laptop does not start with LCD connected via an HDMI cable

  I have a laptop Toshiba A660 running windows 7 Home Premium. I use and external LCD connected via an HDMI cable. If I leave the cable connected to the computer when I turn it on most of the time it does not start. It hangs at the windows from logo. The only way I can boot is power off (by operating switch for a while) and remove the HDMI cable.

  Hello

  To update the display driver, following the steps outlined in the article below:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  See the articles on how to set up two monitors:

  http://support.Microsoft.com/kb/976064

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=f5W9Hvf07IV

  I hope it helps

• Satellite Pro C850 - 1 K 3 can't connect to a TV via an HDMI cable

  If I use either F4/the windows key + P and select duplicate or PC screen only (or another option) and then plug it into the TV, so the laptop screen and the TV screen are blank. By pressing any key does not display anything on my laptop screen, then when I unplug the HDMI cable that it happens with the second screen only option highlighted. My laptop strangely ignores what I click and returns continually to this option and unfortunately, I can't project the screen on any monitor (I tried 4 separate monitors).

  My laptop was able to be plugged into a TV and I did this several times, but as far as I know this stopped when I had a windows 8.1 update (my assumption, I don't know). I searched the web for solutions, and none have worked. I tried the method of detection of the monitor through the resolution on the desktop option, but again, this cannot be done because I don't see anything on the screen when my laptop is plugged into any TV, and I tried many times.

  Any help is appreciated

  Thank you very much

  I use Toshiba laptops a few years now and what I can say is that you need to connect your laptop to the TV first, select the right port on the TV and then use key FN or F to change between TV Office laptops and connected.
  Connected TV or another external device must be established first.

  Please test once more.

• Satellite A100-784 - connect to the TV via a HDMI cable

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE. Its a product abandoned now :-( I wonder if I can connect this laptop with the Sony Bravia LED TV via HDMI cable.
  I'm not able to find if the laptop is compatible for it.

  Please help me a way to find a solution to connect the led TV and how to do it? Please also help with the cables needed for the same thing.

  Sorry guys, I'm quite naïve HDMI company.

  Thanks for all the help,

  Kind regards
  Perkins

  Hey Buddy,

  What do not know exactly?

  The laptop has only VGA and S-Video output port but no HDMI port. So that you can t connect the laptop to the TV because you can t connect the HDMI cable to your computer.

  If your TV is VGA or S-video port, you can use this cable. After the connection to the TV, press the key combination FN + F5 to switch between monitors.

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• Host menu does not appear on my projector via a HDMI cable.

  It works fine if I use component cables, but then I lose image quality.

  Hello Michael,

  Welcome to the community forums of Sony.

  What blu ray player or home theater system you have?

  How long is the HDMI cable?

  It goes through an A / V Receiver?

  What projector do you use? If it's a sony? What model?

  We cannot help without giving some details as to what you use.

• Satellite 1900 cannot conect directly to the modem via Ethernet cable

  I have a Satellite 1900 305 and I can't access internet when it connects directly to the modem cable via ethernet (RJ45), even after doing the procedure of recovery, and before I could. I can work normally and have internet if I connect to the pit of the modem a network hub. Can someone help me with this problem?

  Hello
  If I understand you correct you a trying to connect your laptop via Ethernet to a router or Modem or anything else, which is connected to the internet.

  Well it be, that the cable you a way to make this either a cable crossing of files?

  Good bye

• Cannot hear the sound of the TV after connecting via a HDMI cable

  Original title: sound on tv

  I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only.  How can I fix?

  Hello Monica,.

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can read these articles and check if that helps.

  Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv

  Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions

  Thank you.

• I'm trying to connect my computer to my HDTV via a HDMI cable that connects my computer directly into the TV. I plug it in turn all away and top but nothing, just 'no signal' suggestions on solving this problem?

  HDTV is a Pangoo with 2 HDMI Sockets.
  The computer is a Dell windows XP with 1 HDMI.

  I had the same problem and I've spent too many hours to find a solution and I finally found one. I could also connect with my HDTV with HDMI, then one could i ' t.

  Go to your "Start menu", click on "controll panell", choose "notebook", then "windows mobility center", on the "external" box click on 'connect the screen' and wait a bit until a box appears. Choose "duplicate my desktop on all displays (mirrored), choose and then aply OK.

  I hope I have been helpful for you and many others and you can enjoy your movies on your TV again.

• Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable

  Hello.

  I would also like to ask for help because I'm faced with the same question.

  what I'm trying to get a sound with HDMI, it will not work...

  Delfim João

  Hi @Delfim ,

  Thank you to visit the Support Forums HP and welcome and thank you for all the information about what you tried. I looked in your question about your computer laptop dv7 HP ENVY and the problems of sound with an HDMI cable connected.

  Try this fix.

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  This is a general document on the resolution of the problems with the HDMI connection.

  With the HDMI cable you have restarted the laptop?

  Have you tried another cable?

  Hope it will be useful.

  Thank you.

• I have connected my laptop (HP G72) to my TV (Toshiba VL863) via an HDMI cable, I have a perfect picture, but no sound?

  laptop connected to the tv, good picture but no sound. How to make sound

  Hello
  I would say go to the control panel in the start menu and clicking noise. You see an option within this selection for audio output? You may need to select HDMI as the main output device.

  I hope this helps. Just reply to the results.

• can I use my droidx to run network of nfl to my HDTV via a hdmi cable?

  CAN SOMEONE HELP ME I HAVE THE NFL NETWORK ON MY DROID X AND WANT TO USE THE HDMI CABLE TO CONNECT TO MY HIGH DEFINITION TV.

  Hello RandyLKirk

  It is a Microsoft Windows forum and probably not the best place to ask for help for your Droid X phone. The best place to ask this question would be here.

  http://www.droidxforums.com/Forum/Forum.php

  I hope this helps.