Cannot configure Lexmark Z1300 to windows vista

Similar Questions

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• I try to install 6 photo shop lightroom and tells you that it cannot install because I have Windows vista, I have no, I have 10, how many windows - what I do?

  I try to install 6 photo shop lightroom and tells you that it cannot install because I have Windows vista, I have no, I have 10, how many windows - what I do?

  About Vista, but is not https://forums.adobe.com/thread/1836232

• Configure the xbox with windows vista wireless controller

  I recently bought a wireless Xbox 360 controller to use for playing mainly with Call of Duty 4 on my PC
  I followed all the instructions and have the wireless receiver but cannot operate at all which is extremely frustrating
  I have an install 32-bit windows vista Home premium
  Can someone please

  Hello Foxesfan1.

  First step would be to ensure that the controller is actually seen correctly by Windows.  I'll assume that you have already synced the controller and the wireless receiver by pressing the button on the receiver and the little one on top of the controller.

  To make sure that the controller is configured correctly in Windows start tying the game controllers in the box start the search on Windows 7, the option is called installation USB game controllers.  It could be called game controllers or something similar on Windows Vista, I have here in front of me to check.

  Anyway it should open a window called game controllers, the controller must be in there, in this case click Properties and check that all buttons work properly.

  If it is then its probably does not work because Call of Duty either is not setup in support of controllers (a ride in his options to enable the controllers support), or simply does not support at all, not all areas of PC games. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Can configure is no longer Windows Vista update to include the updates for other Microsoft products (Office, Visual Studio, etc.).

  I once had a problem with Windows Update, which gives me a family of .NET Framework through the window of Control Panel\Windows to update to Windows Vista, even if it has been installed and has Microsoft support help me through EasyAssist. The problem of .NET Framework has been fixed, but now I have a problem: the Control Panel\Windows update window informs me today I'll receive downloads for Windows only, not for all Microsoft products.
  When I click on "Change settings", the Microsoft Update option is no longer present.
  When I click on the link 'Get' updates for more products, I am now redirected to the former site of Windows Update V4 (who is not supposed to appear on Windows Vista) instead of Microsoft Update, and this site Web of Windows Update cannot detect the Vista updates.
  So I'm stuck now with only being able to get informed about the upgrades to Windows, but not other updates from Microsoft. And we don't mean Windows Vista x 64 final with the last Windows Update Agent 7.2.6001.788. This new update would be the culprit?

  Hi Unicodemaster787,

  Even if it is not automatic, you should be able to get your updates from the Microsoft Download center http://www.microsoft.com/DOWNLOADS/en/default.aspx

  Other than that, your best bet would be to do a repair install and let the system to reinstall the original files and settings.

  When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the Search box, and then click configuration in the list programs. Then click on install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  Remember, however, that it could undo previous changes to solve your problems of .net.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download error - cannot download anything on the windows vista computer.

  When I try to download anything, it says that Windows cannot find 'C:\Users\Admin\Downloads\shockwave_Installer_Slim.exe '. Then he said, make sure you typed the name correctly and then try again. I hope you can help me.

  Original title: download error

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  It seems that you have problems with downloading files on the windows vista computer.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would appreciate if you can help me with the following information.

  1. what browser you use on the computer?

  2. What is the exact full error message?

  3. don't you make changes on the computer before this problem?

  4. deal with this problem if you try to download all files from online?

  If you do this in the face of Internet Explorer help, I suggest that you should change the default download location and check if it helps.

  Method 1

  In internet explorer, you can change the default location.

  Here's how:

  a. open internet explorer.

  b. click on Tools , then select view downloads.

  c. downloads for window, click Options.

  d. now, enter the default download location and click on the OK button.

  Turn on the computer at the beginning of boot and check if the problem persists.

  Method 2

  Perform a clean boot to see if no third-party service is causing the problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  For your reference:

  Windows Internet Explorer 9 Download Manager using

  http://Windows.Microsoft.com/en-in/Windows-Vista/using-download-manager-in-Internet-Explorer

  Response with more information to help you.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Error cannot access Internet wireless in Windows Vista

  Original title: im trying to connect to my internet at home, but he says there is no internet access how to fix

  I try to connect my internet home for my laptop, cordless, but when its connected he said thar is without internet access how to fix?

  Hello

  1. What is the exact error message you get?

  2. you use a wireless connection to connect to the internet?

  3 when was the last time it was working fine?

  4. do you have security software installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps do not help then I suggest you to go to method 2.

  Method 2:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

  Hope this helps and keep us informed if you need help.

• How to omit entering the configuration page before that windows vista starts up?

  Hello:

  I have Windows Vista in my Inspiron 1420 and when I turned on my computer and appears the Dell logo, it shows at the top of the page: ¨preparing to enter the setup¨ and the configuration page appears in blue with all the features to install.  I need to press the ESC key, then exit to continue to connect to Windows Vista.  I hate that every time I turn on my Inspiron 1420 this page of configuration and connect inmeiatly. Help, please.  Thank YOY.

  Hello

  If you have Windows Vista DVD, you can try to start the Windows Recovery mode startup repair and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  If this isn't the case, you can try to contact Dell technical support for further assistance.

  http://support.Dell.com/

• Cannot identify the network under Windows Vista

  I have windows vista SP2 and cannot connect to internet.  I see networks, but the computer is not able to identify.  I tried with several different networks, and the result is the same.

  Hi ClarkHayes,

  1. What is the error exact message you when you try to connect?

  I suggest you try the steps from the following link and see if that helps.

  In the Windows wireless network connection problems
  http://Windows.Microsoft.com/en-in/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• Cannot set default printer in Windows Vista.

  Hello
  My computer still works fine until lately something's happened to Windows Vista all of a sudden. One day I put on the computer and found that the left side of the menu 'start' all deleted, and the content on the right side of the Panel is still there. But then I found that I cannot print a document PDF and Excel, and the error message reads: "Before you print a document, you must install a printer." I have a HP Color laser printer connected to it since and it still works well. I can always print Word document (unless I have to manually select HP printer each time the dialog box I have ever had to do before), but cannot print PDF or Excel. On the 'control panel', the HP printer icon is still there, but it is not set as default printer, as it has always been. And when I tried to set up as a default printer, the error message reads: "can't set default printer.

  Can anyone help? Thank you very much.

  I would like to begin uninstalling the printer, restart and reinstall the printer to determine if that solves the problem...

• Cannot access the calendar from Windows Vista Home Premium all of a sudden... get error message indicating it is disabled... Help, please!

  After 1 year with the help of Windows Calendar on Vista Home Premium, I'm suddenly not able to use it (impossible to add new appointments and stored all appointments have mysteriously disappeared). I get a message saying "You cannot add appointments to a calendar that is disabled" the details of State "access denied." ... How is - it happened 'out of nowhere '? How to activate it? It's very frustrating... I searched the forums and Microsoft google the question. I found some results suggesting to either change the registry or download the fix automatically and manually merge in my registry. I tried both with no result. I have event tried to remove the old calendar and create a new one... still nothing. Any suggestions? Help, please!

  Hello NYintelligentinvestor,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that.  What type of entry you are trying to add?

  Look at the calendar and on the left side, to half way down you will see a small block that will have something like "NYintelligentivnestor schedule" - there is a small block to the left of this one. To activate the calendar, click on the box to place a check mark in it.

  If there are calendar shown in this block, then go to "file" on the main toolbar and click on "new calendar" - one should then appears in a block with a check mark in the box on the left.

  I hope this helps. Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access ftp with my windows vista and firefox sites

  On Windows Vista with FF and OracleVM with Ubuntu LINUX/FF. get same error on both Ubuntu
  and the Windows partition. I made my mistake checking on Windows & FF
  Any ftp site, including sao - ftp.cfa.harvard.edu gives the time limit check error message.
  Checked the window firewall and config port 20 and 21: NO DIFFERENCE
  Tried ftp://ftp.mozilla.org/pub/extensions and ftp://ftp.mozilla.org: NO DIFFERENCE
  Responsible for FireFTP and tried above sites: get the message unable to connect, please try again
  By cor - el on earlier thread tried https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/

    IT WORKED!
  

  Then tried https://sao-ftp.cfa.harvard.edu/pub/transfer/nlee/acis_bkgrnd_4.5.7.tar.gz
  Warning windows server unsecured; has asked during the trip. Then received message of hea - www.harvard Port 443 NOT FOUND

  COR - el or someone you suggest a solution?
  Thank you very much

  PROBLEM SOLVED
  Problem was with the COMCAST router firewall. Their technical support fixed within 5 minutes after my third try with them.

  Thanks for your help.
  Lew

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!