Cannot configure printer; Fails to detect a network or usb connection

Hello

I recently got the printer HP Deskjet 3050 a and have been an absolutely terrible time operate. It worked for one night and then disconnected somehow. I wanted to set up a peer-to-peer network since I was in College and do not have a network of myself. Whenever I try to connect, I made sure to connect to the correct network for my printer (HP-Setup-7F-Deskjet 3050 a J611), but even when I do, it is not recognized. He invites then connect the USB cable provided, what I'm doing, but never, she acknowledges that the connection has been established, and therefore, nothing happens. I made sure that the wireless is on my printer and makes everything the site said I should. Please help, I'm desperate.

Thank you.

Note: I'm working with Windows 7 on a Dell laptop.

Hi amandamday,

New USB cables can be purchased at any store of technology such as Best Buy, Staples, or even Wal-Mart. I would like to know if the new cable allows to solve the problem?

Tags: HP Printers

Similar Questions

  • m277dw: m277dw scanning network vs usb connections

    I have my new m277dw put in place with a wired network connection.  All right.  The "scan to network" function works well, but it is pretty basic.   for example, no preview, crop, on mode settings flying, etc..  Does anyone know if direct scanning software used with a USB connection has all the extra features?  If so, I could try to add the USB connection on the nearest computer.  BTW, does anyone know if the printer supports a USB connection AND network at the same time the same computer?

    Thank you.

    Hi @botbswco,

    Welcome to the HP Forums!

    I see that you have some questions analysis about the printer HP Laserjet m277dw, on Windows 7. And I'm happy to help you!

    The scanning software would be the same software you use now, if you have changed your USB connection. You could possibly install the printer using the two connections, but it is not recommended, because you can confuse the computer on which connection printer you use. And still will not print correctly. Would you choose manually on the computer, printer, print every time you print. For example, you may have a printer named HP Laserjet m277dw (USB) and the other named m277dw of the HP Laserjet (network).

    If you are looking for different scanning options, you can always try scanning without using HP software and try to use the third-party scanning software instead. Please, consult this guide, scan from Windows 7 without software HP for HP Multifunction printers, for instructions.

    Hope this information is useful and have a great day!

    "Please click the Thumbs up icon below to thank me for having responded."

  • OfficeJet Pro 8620: Officejet Pro 8620 - after software download on 4 March 2016 printer fails to detect the paper in the tray

    Hi, I downloaded and installed the latest version of the software on March 4, 2016. But after the installation of the software can not print as printer detects no paper and poster-error "on paper" message even if the paper tray is enough. The printer was working fine before the upgrade of the software. The printer is only 2 months old.

    Hi @Al2016,

    First of all, welcome on the HP Forums, as you know it is a big thank you to get help from community members! To ensure that the paper error output is not hardware related, please make a copy and let me know if it works. A successful copy determines that the problem is actually related to the software. If you can not copy, it's a hardware problem and we will focus on the material.

    If you determine that the problem is hardware related, please use the following to fix the problem: a Message displays "paper" and does not Pick Up paper from the printer. "

    In the unlikely event that you can copy do not print, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

    1. in the folder "devices and printers".

    2. choose "print server properties.

    • Win XP - with no printer selected, click 'File' then 'server properties '.
    • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
    • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

    3. click on the "Drivers" tab at the top of the window "properties of the print server.

    4. choose the printer that you want to uninstall, and then click 'remove '.

    5. choose "Remove driver only.

    6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

    If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

    Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).

    The installation screen and the software opens and you can click on connect a new printer.

    Please let me know the results of your efforts and I will get back to you. If one of the suggestions I did resolve the problem, please click Accept as Solution button below so that others may see that your problem is solved! Thank you.

  • Upgrade of connections 4.52 access: fails to detect WiFi networks



  • Cannot configure gmail with messaging metro app error unable to connect. Make sure that the information you entered is correct

    I was able to add an account Gmail for Windows 8 Mail App on my first install and everything worked well. Then bought an SSD and completely installed a new OS of Windows 8 it. Connected with the Live account that I used with the first installation of windows 8. All synchronized. The Mail app has Live accounts and Gmail put in place without having to re-enter the information myself. However, I noticed that Gmail sync never even when I choose sync. Removed from the account to add it again, but have failed so far. Keep gives me the error "unable to connect. Make sure that the information you entered is correct. "Tried to install it on my phone Windows 8 (Nokia 920) and he keeps asking me to re-enter the password. I'm 100% sure that I have no 2-step check set up I checked several times. Never allowed them in the first place.

    At this point, I don't know if it's Google problem or the problem of the Mail application. Any suggestion?

    I also had the same problem. I had no problem for the other three Windows 8 install / computers that I used and the last she has imported all the fine adjustments. However, I had a portable Windows 8 different today and worked alone of my three accounts to Gmail. How I fixed it:

    Of the Mail app: charms > settings > accounts > add account > other account (NOT GMAIL!)
    Click IMAP for account type, then enter your credentials as usual. It connected and synchronized immediately for me.
    Hope this helps!
  • cannot configure the plug-in and play micro external usb,.

    I think I need to download the software, but don't know how to download the software or where to find the software I need, can any one help thank you.

    Hello

    Please activate the external microphone, then try again (for Windows):

    Right click on the speaker icon,

    Select record devives

    Right click and activate

    Kind regards.

  • MF1522 MFP - software detects no network device

    Hello

    I tried HP support and they have no phone, so I thought I would try here.

    We have a HP MF1522 MFP that has worked very well as the printer since we had it - of course I originally installed it the old-fashioned way (do not use the HP software).

    However, when you try to install it via the HP software it fails to detect the network printer (although I can connect to its IP address without problem, or print over the network as well).  This means that I can not use the feature that is what I am network analysis is after.

    Apart from the connection to a computer via the port USB so that she can use the scanner, does anyone know if theres a way to "fix" the HP configuration utility so that it can detect the scanner on the network?

    Firewall is turned off.  Setting the field. Tried on Windows XP Pro and 7 Enterprise.

    Thanks for any help!

    Try running this utility.

  • HP Deskjet 970Cxi: HP printers - install another driver in Windows 7 to print USB connection cable - PROBLEM

    Hi - I have a HP Elitebook6930P running Windows 7 Ultimate x 64 and a printer HP Deskjet 970Cxi with a USB connection.

    I try to get printing to work.

    There is a 970Cxi pilot in the laptop, but it won't work.

    HP have a support document - "HP printers - installing year Alternate Print Driver in Windows 7 for a USB connection cable" - and I tried to follow this exactly a number of times without success.

    The problem is that it is inaccurate and contains instructions that do not work and refers to procedures that do not exist in Windows 7.

    Therefore, I have no success in the conclusion. I can not communicate with HP for assistance, or no explanation as to why their document will not so blatant.

    Can anyone help please?

    This widget could not be displayed.
  • PS B110a - wireless configuration will fail if the network has multiple access points

    Photosmart B110a (CN245B) wireless AIO printer.

    I have several wireless access points using the same SSID to provide coverage over a large area. When you install the printer on the screen TouchSmart wireless installation fails. Print report reveals the following error:

    "More than one access point/router wireless was found which matches your network name (SSID). If this is not intended, your HP printer can connect to the wrong network. »

    In my case this IS planned but there seem to be no available option to answer "OK, just connect to any point of access by using my SSID.  If I turn off all but one the APs configuration complete OK. If I have to do every time I turn on the printer the printer is USELESS for me.

    Did I miss something?

    sijomi

    This should not be a problem.  I have a B110 (and another 10 or so HP wireless printers) on a network of airports with 5 access points and they just connect.

    Here are a few suggestions:

    1. don't use WEP - use WPA or WPA2 with a 13 + character password.

    2. enable the SSID broadcast on all access points

    3. do not use the MAC filtering acddress

    4. make sure "AP isolation" or "isolated wireless" is disabled.

    5. make sure that you are not on a private network, virtual, or connected to your network of comments.

    6. If different strings on access points do not work, try the same channel.

  • X 200 wireless problem - detects available networks, but cannot connect to them.

    Hi all

    I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

    It's a brand new computer that I just received.

    Some info:

    ThinkPad X 200 7454-2HU, running Vista x 64.

    Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

    The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

    There is no problem with the wireless network (the other computers connect to it without any problems).

    I tried to cancel the option "n", leaving a "b/g", but it did not help.

    It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

    When I use "Intel ProSet/Wireless Tools" diagnose, I get:

    Test equipment: managed (wireless hardware is enabled)

    Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

    Radio test: past. The radio is on.

    Scan Testass. There are 12 networks available to connect.

    Association test: failed. No partner.

    When I look at the statistics, it seems that the card receives bytes (nothing is sent).

    What do you think? Is it a hardware problem or software?

    No idea what can be done if it is a software problem?

    S.


  • HP configuration wizard does not detect my wireless network.

    Hello

    I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

    Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

    All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

    I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

    I tried the following: -.

    -Rebooted router

    -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

    -Created a new comments system.

    -The router is configured to run g and n network.

    -The network names have any unusual characters.

    -Tried to enter the name manually.

    USB printing is fine.

    Is there something about the installation wizard that can not locate networks?

    OK, on the front of the printer, go to wireless menu and restore the default settings.

    When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

    Be careful with the comments network, if your computer or printer connect you will not be able to print.

  • HP printer fails on network until the power is recycled

    This HP printer fails to start on my home network, until the power to the printer is recycled.  It is a 2200 with 610n network HP JetDirect J4169A card model and the current version of the firmware (L.25.57).  When the XP - Pro computer is started, and then the printer is turned on, the printer is not recognized.  Nothing is displayed when we sail to http://192.168.x.xx at HQ to the printer is turned off and then, the printer works normally, and the http://192.168.x.xx page is normal.

    I put the IP address of the printer and for each computer on the home network with 'IP configuration manual method' to 192.168.x.xx recognized once on the network that the printer does not print normally.

    The series of events is the following: computer XP - Pro and network router work normally.  I turn on the printer for the first time.  The printer is not recognized.  Using Internet EXPLORER 7 and tempting to commit to http://192.168.x.xx produce an error message.  I switch off the power to the HP printer.  I turn on the power.  Then navigate to the http://192.168.x.xx , I get the familiar screens showing details of the printer.  I am able to modify them if necessary.  The printer seems to work normally.

    I just need the printer to start normally the first AC power is on.

    A user on the forum Fixya said: "looks like the Jet Direct card is faulty." Replace it. "This solution worked. I understand not there is not a way to run diagnostics on a 610n to determine whether there is in the plug. I did buy a used card and find that it works OK. I'll avoid the upgrade of the firmware since firmware in place on the 2nd map starts OK each time the printer is on, and it seems that there are no additional problems with printing.

  • Satellite T135D - cannot detect wireless networks

    I bought a T135D early January.
    Everything was happy until one day my laptop decides it cannot detect wireless networks, and even less to connect to one.
    I don't think the T135 came with a manual switch, while in the BIOS it says it's on.

    The graph with the antenna and 4 bars charge is no longer at startup, or the light that lights up on the front of my laptop. It's frustrating to have this kind of problem so early in the game with the T135D.

    Any help would be appreciated.

    Hello

    The wireless network must be activated by pressing the FN + F8 key combination.
    Have you tried that?

    If not, please check it

    Of course, you must make sure that the WLan card driver is always up to date.
    Here you can find the most recent:
    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

  • iPhone 5 c cannot detect the network.

    Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

    A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

    Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?

  • Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

    Hello

    I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

    I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

    Hi there @tikaro23,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

    I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

    What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

    Have you tried to restore the BIOS?

    Have you tried to connect directly to the Modem/Router?

    Have you tried to boot mode safe?

    You can maneuver in Mode safe without problem?

    In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

    There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

    You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

    • Uninstall the driver of network card in Device Manager,
    • Reboot the laptop twice,
    • Reinstall the driver.

    Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

    I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

    • In the Device Manager
    • Click the network adapters to expand
    • Right-click on the network adapter family
    • Select software update of the driver
    • Choose search for automatically updating driver software.
    • Once the installation is complete, restart your laptop.

    Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

    Thank you!

Maybe you are looking for

  • Layout of new anime if I try to scroll down

    I have flashing and sensory processing issues, animation, etc can hurt, can trigger my migraines, and flashing lights of security triggered my seizures. I do not understand why so many sites, including this site adopt the same as painful, where they

  • How can I save my MacBook Pro on the external hard drive that I use for my iMac?

    Don't use much of my MacBook Pro, I plan to use it a lot. It has not been saved, but I want to start the backup on the external drive that I use for my backups of the iMac. I don't know what Airport Express or what it means by creating a base station

  • HP mini computer: network controller has disappeared

    Hello I can not connect to the internet. Here's my hardware for the network controller id:PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103CPCI\VEN_1814 & DEV_5390 & CC_028000PCI\VEN_1814 & DEV_5390 & CC_0280

  • Laptop won't start

    I fell asleep last night with a running program and the laptop went to Hibernate.   I can't start up.   Unable to get anything else than a black screen.   Tried out of the battery and the power supply and restart, but which did not work.   I am runni

  • Files are not properly displayed

    I was playing with my rocket with the new firmware update! Unfortunately, I found that folder names do not always display correctly.  They do, however, appear correctly in Solution Explorer window.  I have sync in auto-detection mode (MTP) with WMP.