Cannot configure the device AP on Cisco WLC
Adding new devices of AP to our Organization, and when I try to add them to our 5508 Wireless Controller I get the following error:
If you are in the United States, it is also possible that your new APs are in the regulatory domain of B - PSA, but you have not improved your WLC to support APs b again. More info here:
https://communities.Cisco.com/docs/doc-66117
Tags: Cisco Wireless
Similar Questions
-
Cannot configure the buttons on the tablet on Portege M750
Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.
When I touch the botton nothing happens.
Do you have XP or Vista installed?
Have you installed Windows yourself using a version of Windows?
-
Cannot select the device scanner, AIO F380, MacBook Pro
Cannot select the device scanner, AIO F380, MacBook Pro
Thank you, Sean. I found out what I needed to know to fix the DIF from a document from hp customer service. I was able to fix by restarting, it is to unplug the usb cable first from the printer, wait 5 seconds, plug the cable back in. Then I desconnected the cable from the computer, wait 5 seconds and plugged.
Duh!
Thanks for responding.
-
Windows cannot initialize the device of this hardware driver. (Code 37)
Windows cannot initialize the device of this hardware driver. (Code 37)
There is no upper or lower filters in reg.
external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
How do I solve this problemHello Rajendra Aagarwal,
Thank you to contact the community Microsoft and we will be happy to help you with your concern.
According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).
Method 1: Run the Fixit and check
Hardware devices do not work or are not detected in Windows (Fixit)
Method 2: Check the steps to get the 37 error code
Explanation of error codes generated by Device Manager in Windows XP Professional
Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
Unable to connect because of firewall or something, not true of course
When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.Hello
I suggest you to follow the steps in troubleshooting this article and check if it helps:
Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
http://support.Microsoft.com/kb/871122
Also read these articles and check:
In Windows network connection issues
http://support.Microsoft.com/kb/313242
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
SBS 2008 backup automatic Wizard fails cannot configure the backup schedule
I need to install a new drive for backup for SBS 2008.
The new drive is 3 T. The backup requires 567G.
The Backup Wizard fails with the message "cannot configure the backup schedule.
I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.
The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.
Any suggestions?
Thanks in advance
Murray
It is a forum for specific consumers.
You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver
-
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Cannot configure the static IP address for Cisco Touch 8 "
Hi all
I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.
1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.
2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.
3. tap on "IP settings."
4. Select "Manual IP allocation".
5. Enter the IP address, subnet mask, default gateway, and then press "Save".
Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.
In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.
I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.
Best regards
Kotaro Hashimoto
Hi Kotaro,
It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.
To work around the problem, set IP address you want the button before moving on to TC7.0.x.
The bug has been fixed and will be included in the next version of the TC software.
Kind regards
Jonas Tysso
-
Cannot console the device after AAA configuration
I've implemented ISE in my environment and from the configuration of my devices to authenticate on the server I h ave not been able to connect to the devices using the connection to the Console.
Here is an excerpt of the configuration of the device.
username administrator local privilege 15 password 7 06205F334868591A1004
AAA new-model
!
!
RADIUS AAA server group ISE_Servers
auth-port 1645 10.200.1.19 Server acct-port 1646
auth-port 1645 10.200.2.19 Server acct-port 1646
!
Group AAA authentication login default local ISE_Servers
the AAA authentication enable default group, select ISE_Servers
Group default AAA authorization exec if-ISE_Servers local authenticated
AAA accounting send stop-record an authentication failure
AAA exec by default start-stop accounting ISE_Servers group
AAA login by default start-stop accounting ISE_Servers group
RADIUS-server host 10.200.1.19 auth-port 1645 acct-port 1646 borders 7 0231504919570126581E0754241411585951
RADIUS-server host 10.200.2.19 auth-port 1645 acct-port 1646 borders 7 097B1A1B0B5419151F5C0A670A272B606077
!
Line con 0
exec-timeout 0 0
password 7 1068590B 013142081917
line vty 0 4
password 7 096A1E1B1D2347111E1F
length 0
line vty 5 15
password 7 096A1E1B1D2347111E1F
!
Any help or advice would be greatly appreciated.
Thank you
ISE_Servers is a radius server group name. In fact, he applied a default method list.
Group AAA authentication login default local ISE_Servers
Jatin kone
-Does the rate of useful messages- -
iPhone 6 cannot find the device bluetooth audio
My iPhone 6 (IOS version 9.3.5) Impossible to find a new bluetooth device and keep the search bluetooth unanswered. In addition, reception (when listening i-tune) is bad and intermittent. Appreciate advice how to solve this problem. Thank you.
Hello ChengMY,
Thank you for using communities of Apple Support.
If I understand your message that your iPhone 6 (which is updated to iOS 9.3.5) cannot find a new Bluetooth device and don't stop looking for him. What type of device Bluetooth you are willing to pair with your iPhone? The reason why I ask, is that there are only some that the iPhone supports Bluetooth profiles. Here is a list of the supported Bluetooth profiles:
iOS: supported Bluetooth profiles
If the device you are using uses one of the supported Bluetooth profiles, the steps described in the following article can help solve the problem for you:
Get help connection an accessory with your iPad, iPhone or iPod touch Bluetooth
Best regards
-
Qosmio G50-12 q - how to configure the devices connected to the USB mode standby
Hello
I wanted to use the PC sleep function.
I also wanted to as devices that have been extinguished when in stand by.Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.
Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.
What checks and I have to perform in the configuration PC bios?
How we in the bios? By pressing the keys on which?
Thank you
* valkyrie @ *.
Please post comments if workaround posted by Akuma helped!
It would be really appreciated.
-
Equium - Windows cannot load the device driver for USB dongle
I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »
-what it means and how can I solve this problem?
Hi Ozcat,
What USB dongle is that exactly?
What cell phone do you have?
What operating system is installed?
Have you already tried to reinstall the driver for USB dongle? -
I have a HP Pavilion running on XP.
Device Manager displays the following material: A: HP CD Writer CD16b
B: pioneer DVD - RomDVD - 116.
Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)
By clicking on the two points of product
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).
I created the 'properties' of each machine that pilots should be:
For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.
I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.
Does not cure the problem.
Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)
I'm out of my depth now. No idea what is ASPi Shell.
Help, please
The problem is most likely the pfc.sys.
What I would say, is to follow the steps under "Windows XP" in the MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.
Here is some info on the pfc.sys:
-
My "wireless connection" screen does not show available networks, but gives me the message "Windows cannot configure this wireless connection".
Should what changes I make to connect to different wireless routers?
Hello
You should try another network you know for sure that it is Public and open (as in the Starbucks or McDonald's).
Wireless in general, http://www.ezlan.net/wireless.html
-
Cannot configure the pedal to work with Windows Media Player
OT: WINDOWS MEDIA PLAYER/PEDALS - NEED TO TEST FOR A MEDICAL TRANSCRIPTION JOB URGENT - UNEMPLOYED TO RUN OUT OF MONEY!
I need my pedal to work - something about Windows Media applications and find a .wma extension file, so I can test for medical transcription. Apparently, I'm supposed to have some sort of connector plug-and-play. What kind of pedal I have no idea. I have two and neither a no matter what brand name or marking, whether. I downloaded Express Scribe according to the instructions of the employer, but have no idea how to do to get things to work.
Hello kbarr5050,
1. your pedal has a USB connector to connect to the computer?
2. what happens when you connect your pedal to the computer?
Most of the pedal are Plug-and-play with a USB connection and should be detected when connect you to the computer. There are three controls which are usually Setup for rewind (right), play/pause (Center) and fast-forward (left), but you can configure them.
a. If you have a CD you received with the pedal, follow the instructions in the wizard and install it.
b. install Windows Media Player plugin pedal if the device does not announce a capacity inherent in the application. Download the Windows Media plug-in website of your foot pedal developer support as directed by the manual of the device or the help section (you need to contact the employer for information on this).
c. open the pedal control application.
d. Enter your key combinations you want in the corresponding fields in the pedal assignments tab.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I have Thunderbird installed on my desktop and laptop. So far, it worked very well on both machines. Today, when I try to activate the Thunderbird, the software on my desktop and laptops come on the screen, like the "sign-in" box When I try to connec
-
Why my iphone 6 s doesn't have an imovie?
Why my iphone 6 s does not have the imovie? I tried to go the application made by apple and download it, but I was not free. I have to pay for it. Help, please
-
Pavilion HDX: How to free ZIF on Pavilion HDX
I try to remove the keyboard, but can not find a way to release the keyboard tablecloth without breaking something. I went through similar and videos posts here, but none are related to the exact connector I. My ZIF connector and the cable Ribbon key
-
Games run too fast! (Faster than normal around 1.5 x)
Hey I have problems playing games since the installation of W7. I tried only two games, which is Half Life: counter-strike 1.6 through Steam and Batman Arkham Asylum. From what I see, I shoot and walk faster in CS 1.6, when I play on my own. But when
-
How to get application UUID for BBMPlatform record? Thank you