"Cannot connect" and I'm stumped.

Similar Questions

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Cannot connect and use 2 hard drives Canvio de Store.E at the same time

  Hello

  I have 2 devices Store.e Canvio: 2 TB and 3 TB respectively but it seems that I can't connect/use them at the same time, as if I do it, one of them (the last I connected), becomes inaccessible ("access denied").

  If I disconnect the first device I connected, the other starts to work,

  Is an odd question, and I can not find someone to live something similar...

  No idea how could it be the cause, or how can I solve it?

  Thank you

  I m wondering if the same problem is displayed using another computer or another USB hub with an additional power supply.

  From my point of view of the few this problem could be related to the low power provided by a single USB port.

  The two hard drives seem to support the USB 3.0 standard.
  The USB 2.0 port common provides 500mA and USB 3.0 requires 900mA
  This means that two USB devices connected simultaneously use 1800mA which could be too much for the USB ports for s laptop

• Cannot connect and access Facebook

  why I am not connect & not access my facebook & it please fill out a security check

  Original title:, I'm not sign in

  Actual use of the phrases and works. This isn't a chat room.
  This security check are you talking about? There is no such thing.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Cannot connect and more as a user apps

  I created a EUL APPS using the instructions provided by link: Armstrong-Smith Consulting and am able to connect administrator discoverer as SYSADMIN and administer the EULS that was created under a DB account.
  
  I gave the administrative rights to a business district to an apps user.
  
  I try to connect to Discoverer Plus and/or Viewer by using the user account apps with administrative rights for the company in the EUL above and get the following error;
  < p >
  Error < strong > < facilities >
  A connection error has occurred.
  -Unable to connect, perhaps due to an invalid parameter Applications GWYUID. Please contact your discoverer Manager.
  
  How can I go about connecting to the EUL APPS or I am that approaching the wrong way? The final objective is to implement the end users who can use this license to create reports for our installation.
  
  Apps Version 12.0.x
  Version of DB 12.x
  E-business Suite
  < /p >

  Hello
  It's Kevin? :-)

  If so, I sent you a response to an email. If this isn't Kevin, here's a possible solution:

  Looks like your APPLSYSPUB account has a different password for the standard PUB. For this reason, you need to change this setting in your pref.txt file.

  If you look in this folder: * $ORACLE_HOME\Discoverer\Util * you will see a file called pref.txt. Edit this file and look for the GWYUID setting and change the password to match what you have inside the admin.

  After editing the file, save it, and then starting in the same folder, run the file called applypreferences. Under Windows, it's a BAT , under Linux and Unix file, it is a SH file.

  After you apply the privileges you must stop and restart the server of discoverer using opmnctl stop followed of opmnctl startall when executed since the * $ORACLE_HOME\opmn\bin file *.

  That should do it.

  Best wishes
  Michael

• Skype cannot connect (yes I have tried re installing/setting far and deleted my roaming folder of Skype)

  So as the title suggests, Skype cannot connect and yes I have updated to the latest version and have removed the trace of the Skype folder in the folder of the mobile.

  N0nUhn0nym0s wrote:

  IM using Windows Firewall that, ive tried time Skype for the permit.

  For my anti virus I don't have unless the Hitman Pro, Ashshampoo and mcafee site Advisor is considered to be one

  My internet Explorer, that I do not and cleaned the cache and cookies, is version 11

  Try the following:

  http://community.Skype.com/T5/Windows-desktop-client/quot-quot-error-Skype-can-t-connect-quot-quot/m...

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• IPad2 disabled and cannot connect to iTunes to restore

  IPad2 disabled and cannot connect to iTunes to restore

  What happens exactly?  What can't exactly?

  Are you sure that you have iTunes 12.4.1 (current version)?

• Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  I'm your pain ptapp!

  Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

  All 4 of my devices constantly ask my password because of some problems with xyz account.

  Then I enter the password only to be told that iCloud cannot check my password.

  Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

  I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

  Apple needs to fix this problem, if they have any idea how to.

• inspit of my apple ID and password cannot connect my my iphone apple ID 6

  Inspit of my apple ID and password cannot connect my my iphone apple ID 6.

  What happens when you try? What message do you have? It is difficult to offer, unless you offer more details.

• The Mac cannot connect to iCloud extremely disturbing and annoying pop up

  I get this pop up and I can't fix it:

  The Mac cannot connect to iCloud due to a problem with "myappleid".

  Preferences iCloud open on this issue.

  Two buttons - Later and iCloud preferences...

  If I click later, he reappeared in the minute, sometimes a second later. It is a big problem because the functionality of the command does not work. He also grabs focus, no matter what I do - I watch full-screen movies, writing in a web form, play games, out of a keynote with a client presentation. Very, very frustrating. Not the kind of behavior I've seen in Windows 2000

  If I click on iCloud preferences I receive a request to enter my Apple ID password in the Panel of the iCloud system. I have enter my password and get an error not found Keychain with the message box:

  Impossible to find a keychain to store "281711789."

  Two buttons - Cancel and reset to the default values

  If I click Cancel the previous password box returns "an unknown error has occurred." The problem goes away, but I have the original pop up within minutes.

  If I click on Reset to Defaults, I get a very scary message:

  Are you sure you want to reset your

  Keychain? This will delete all your saved

  Passwords, keys and certificates. You

  It is not possible to undo this operation.

  
  

  Two buttons - Undo and Redo

  
  

  Cancel takes me to the first problem, regular and extremely annoying and disruptive noise upwards.

  
  

  Reset is not an option! I have an ecosystem whole apple, phone, office, laptop and iPad. I need to fix my keychain but don't know what's wrong with it or how to fix it. I can open Keychain Access. I don't know if it is possible to save a set of keys and to reimport?

  Any help, especially a working solution, greatly appreciated.

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  ls -@BOaen L*/Keyc* | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• A Wi - Fi connection does not have an IP address and cannot connect to Internet

  Here's my question:

  "Wi - Fi doesn't have an IP address and cannot connect to Internet"

  But he connects.  I use the model of airport Time Capsule ME182LL/A and the last OS.

  The reason why I suspect the problem is that my Samsung smart TV will not connect to internet, but connects to the WiFi.

  Do I have a problem when the network preferences indicates my network with a point orange and says 'No IP Address'?  It doesn't have a green dot next to the Wi - Fi connection and it says connected.  I'm puzzled.

  Thanks for any idea that you can provide.

  Something wrong with the Setup program.

  After the airport utility screenshots of the configuration of TC.

  In particular this modem do you have? Actual spending brand and model please.

  Who is your ISP?

• Cannot connect at all on the desktop, but XBOX and laptop.

  Desktop has been updated Friday. Cannot connect since then. XBOX, portable, Blu - ray easily connect. One office has Firefox. All others connect through a wireless router off the power of the desktop computer.

  -> Press and hold ALT, or press F10 to display the Menu bar

  -> Try the following and what that either configuration works, keep it Permanent:

  (1) go to the Menu Tools-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option 1-> click OK-> OK

  (2) go to the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option2-> click OK-> OK

  (3) go in the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option3-> click OK-> OK

  Check and tell what solution works.

• Administrator account has been disabled and cannot connect at ALL.

  I own a 'HP G71-340US Notebook running Windows 7"and I'm trying to restore my computer completely (for delete). Then at some point when I turned on the computer a few days ago, it took me in the Recovery Manager, I couldn't do anything. I try to restore the computer like new and said, it will reboot several times. I let him, then I see an error saying that it cannot restore. I click Ctrl, Alt, Del and was able to connect outside of that. Then after that he showed what to connect to. I click on administrator (because I'm the administrator of this computer) and it says disabled account, see your system administrator. Then I click on another user, he gave me the opportunity to put a username and password, but it keep saying that the username and password is incorrect. So I turned the computer off, waited 10 seconds, then he tries to put in place like new, it took about 20 seconds and then a different error comes up saying, 'Windows cannot install, please restart to install. I did so many times that I think I messed up my computer. I can't even contact HP to the computer in the Recovery Manager, and I can't go to Safe Mode.

  Due: I got more than 458 Trojans, rootkits 2 and 0 viruses on my computer (as it is said when I scan the computer until errors have shown).

  And please do not ask about Trojan horses, I don't know how that happened on my computer.

  NEW PROBLEM: I turn on my computer this morning, it says «Set up as new computer...» "then he takes me to the screen host then within 20 seconds, he said that" windows cannot install and the computer must restart. " "I let it restart about 3 times and still nothing. I try to get into Safe Mode, but it won't load at all.

  The error of hard disk 1 is a failure code for the short test on the hard drive. This means that the hard drive is faulty or failed and must be replaced. Which may have been the reason that failed to install originally.