Cannot connect by Satellite A355 for a Canon IP Pixma 5000 on a LAN

Similar Questions

• error cannot connect to vworkspace broker for connections. Please contact your system administrator.

  Hello

  our current facility is the next version:

  vWorkspace Version 7.5.304.547 on Windows 2008R2 Standard.

  When a new user logs in via the HTTP link brokers, they see the web portal with the logon text boxes, but when they enter their credentials, they receive the following error message:

  error cannot connect to vworkspace broker for connections. Please contact your system administrator.

  existing users can connect without problems. We have verified that the user account is not locked.

  I checked the link, however, we have much farm.

  I restarted the connection brokers and checked the event logs without finding the problem.

  Good skills in Debug. I remember that the 8000 Char limit. Well, the good news is, we have fixed this bug 4 years ago! He has been vice Id 191744

  It was fixed from 7.6.

  If you have a support contract, you can switch to one of the newer versions and the problem is solved.

• Cannot connect my Satellite L20 to AP

  Hello
  I have a satellite L20-214, just bought it and an edimax 7205 ap.
  Both supported the 80211b specifications.
  Access to the AP is completely open!
  But I can't get the laptop to connect.
  He sees the network in the list, but it just cannot connect to it.
  I tried all settings,
  The access point works perfect with smc cards and a few old books.
  I set all the possible settings in the config of Toshiba, disabled the encryption, change the channel to 1 because it is the channel of pref. of the ap and choose 80211b as prim.

  For now, I'll give some further tests before I have to return the laptop to the store because it's brand new.

  But I hope someone has an answer for me.

  [Edited by: admin on 28 May 06 06:28]

  Hello

  Also check if you can find the latest version of the driver for the WiFi card. Also check Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Cannot connect by Satellite A210 of WLan

  Hey,.

  I installed Windows XP on my disk hard of one another. I installed all the drivers, but when im want to connect to my WiFi,
  they say "cannot connect to the W - Lan, W - Lan not scope, or has been turned off. "Try again". Or something like that

  Hello

  You are looking for in this forum for similar issues and proposals of solution?
  Do this! There are enough discussions on these issues.

  What have you already tried to solve this problem?

  I mean that should first be the Wlan.
  Then you should put a right SSI, encryption, and password encryption.

  Did you do that?

• Cannot connect by Satellite P750 to TV via HDMI

  Hello

  I am trying to connect a Satellite P750 with Windows 7 to a TV via HDMI and have had no success.

  I tried without success to the following:
  1. I chose F5 function to extend the desktop with desktop + HDMI, but also just HDMI only
  2. I tried the windows P for the use of projector function
  3. I tried different TV including Panasonic and Sony Bravia
  4. I tried another HDMI cable, I use my Xbox with
  5. in the devices section, I can see the TV is added and tried to change the settings, without success
  6. when I looked online for a solution, a solution was to download HMDI Control manager.
  7. After installing it and when I tried to use it, I got the pop-up message "using the HDMI control, you must activate it.

  So I was wondering if the HDMI port is not properly enabled. According to me, he works one way or another, otherwise the computer would not be able to detect the TV when connected.

  Can you please offer any assistance?

  > 1. I chose the F5 function to extend the desktop with desktop + HDMI, but also just HDMI only

  And what exactly happens if you press Fn + F5?
  You see the Toshiba Flash Cards appearing at the top of the screen menu while pressing FN + F5?

  Please note that the output screen must be changed before you start to play a video.

  Right channel/HDMI port is chosen in the settings of your TV?

• Cannot connect to apple tv for Mac OS Sierra

  Hello

  I upgraded my Macbook Pro (Mid 2012 retina) to Sierra de MacOS. When I am trying to connect to apple tv by clicking on the AirPlay icon and click on my Apple TV it asks me to insert a password! Apple TV displays an access code and I use it but it gives me this error:

  Cannot connect to 'Apple TV'

  I upgraded my Apple TV to the last tvOS (10.0). And it gives me the same error.

  I tried to turn on the access code and password on Apple TV AirPlay adjustment but same error. Off, same error.

  Help, please.

  Thank you

  Hooman

  Did you get anywhere with this? I have the same problem.

• Cannot connect by Satellite A30 to WLan

  Hello

  I bought used Satellite A30 for girl - can't get wireless hub.

  Can someone help please with requirements/updates at necessary level for this?

  Man thanks and greetings

  Have you checked if your laptop Satellite A30 was equipped with the LAN card internal minPCI?

  Go to Device Manager and expand network adapters area.
  The wireless network card must be included if it is available.

• Cannot connect by Satellite C660D to my LCD TV

  Hello

  I need your help

  I have a Toshiba satellite C660D with a graphics card AMD Radeon HD6320, with the updated drivers up-to-date. I can't connect it to my Sony Bravia KDL-40W2000.

  I bought a vga-hdmi cable but the laptop does not recognize the TV, I tried all the options AV. I tried with another laptop with a s-video to s-video output and I got video connection.

  I need to change the cable to a vga to s-Video or is this something missing with hdmi one?

  Thanks for your help!

  > I bought a vga-hdmi cable but the laptop does not recognize the TV

  You cannot use and VGA to HDMI Cable
  The VGA provides the analog signal, HDMI provides digital signals
  It NOT possible to convert the analog signal to digital!

  So if your laptop provides only the VGA port, so you must use and VGA cable VGA (RGB).

• Cannot connect by Satellite Pro projector if more than 3-4 m cable

  We have several laptops - and we have never had any problems that they might know an external projector.
  The length of the cable is normally around 10 m.

  Our Toshiba Satellite Pro laptops can only connect to an external projector if the cable length is less than 3 to 4 meters.

  What shall we do?

  Hello

  > Our Toshiba Satellite Pro laptops can only connect to an external projector if the cable length is less than 3 to 4 meters.
  It seems that the video signal is too weak and he cannot reach the appliance connected to the end of the cable.

  I found this info useful on this page that explains this behavior:

  + A normal PC, notebook or tablet PC VGA signal is not designed to operate on long cable runs. +
  + You can find only one kind of PC or laptop will work with a long cable to projector, and another type of PC or laptop may not work. +
  + However, this does not mean that the second computer is down. +

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC333092

  _Solution: _
  The VGA signal must be amplified before it can be sent to the bottom of a long cable. These symptoms are all indicative of weak signal problems (or bad wiring).
  You should always use an amplifier VGA (active), Terminal VGA box (active) or a switching VGA (active) unit when you use along the VGA cables

  Good bye

• Cannot connect by Satellite A305 Linksys WRT160N wireless

  I have a Satellite A305-S6839 with Windows Vista Edition Home Premium that I tried to connect wireless to a Linksys Wireless - N WRT160N router but I am unable to get the service.
  I can configure the router and it transmits properly, but for some reason that I can't connect to it. I tried to reboot several times that the manufacturer suggested unplugging the cables, but that did not work. I suspect that there are drivers I need to download for this operation.

  Someone give some advice?

  First, visit the Toshiba support site we and install the latest BIOS and Wifi Driver.

  Second, try to change the Wifi settings-Wifi card-> properties > Device Manager. Increase power output, select "802. 11 g-only", turn off energy-saving.

• Cannot connect by Satellite A200 - 1 X 1 to two hubs of WLan

  Hello

  having a problem with the connection to a new laptop A200 - 1 X 1 with the wireless card Atheros for 2 different wireless home hub.
  I'm assuming that its todo with the Atheros card not taken support WPA / WPA2 a, b, or g mode.

  Can someone confirm please.
  If so, it will connect using WPA mode with draft 11n wireless hubs?
  If this is the case, install the 3945ABG card Intel would work in this phone?

  If so, how easy is it to spend?
  The laptop is used by my mother who lives away from me for more than 3 hours.

  I can get the card for about £15 Inc., but I want to know if he's going to cure the problem.

  See you soon
  Nick

  I have Satellite P200D with Atheros AR5007EG Wireless Network adapt and use at home. WLAN is encrypted using WPA and for the speed of data transfer, I use standard g.

• Cannot connect by Satellite P100 using WPA WLAN encryption

  I got a Satellite P100-160 with Vista home premium and tried to connect to my wireless network having WPA security without success. Is it possible to make this work? My router is a SMC and their assistance service said I should look for an updated driver.

  Is there a driver? The card is an Intel Pro/wireless 3945abg.

  Hello

  I don't really know what the problem may be, but if possible, try to install the latest Intel driver. You can find it HERE

• Unable to connect by Satellite A100 for TV using a cable SCART

  Hello
  Please help me! I'm trying to connect my laptop Toshiba Satellite A 100; Video card from NVIDIA 7600 with my LCD TV Panasonic Viera.
  When I connect it with the cable SCART there is no signal on the TV.

  Maybe my video drivers are not real, but when I download again on the Internet it displays the error message?

  Before that, I was with the old CRT TV-Goldstar I there is no problems.
  Now, I can't change my resolution he remains on 800 x 600 for the second screen and does not find it.

  I hope someone will give me useful advice!

  First check the TV settings in the properties of the nVidia graphics card!
  I put t remember where you go exactly and what settings are important, but you should definitely check out everything in the graphic properties-> advanced.

  In addition, the user manual describes exactly how to connect a TV to the laptop.
  To my knowledge, you must use an s-video cable.

• Cannot connect the Satellite A660 to WLan - card not found Intel

  I unboxed it today and connected to my home wireless network. Everything was fine.
  I propose then my laptop in the living room where the router and the modem is, the connection dies less than a minute or two.
  Then he says that there are no networks in range at all, cannot detect everything.

  I troubleshoot it and the results are: he says: problem with the router / access point is fixed; and another notification that says a network cable is disconnected or may be broken. I have no cable so idk why he tries a wired connection. I reset my router and tried everything.

  I take her back to połączyćto left home in my room and it works fine, no drop outs.
  It's all new, satellite a66. I made sure that my data was on and the wifi is good.

  Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...

  Thank you.

  JD

  > Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...
  Because of this message, I would recommend checking the status of the WiFi (WLan card) adapter in Device Manager.
  You could uninstall the WLan driver in Device Manager.
  Then you need to download the latest driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  and should install the new drivers.
  Reconfigure the Wlan connection and test functionality.

  PS: Please make sure that the WiFi was enabled (FN + F8) before trying to set up the connection.

• Cannot connect ACER LIQUID Z630S for windows PC. Pls help

  I'm Dr.Aravindh of the India. Recently bought an ACER LIQUID Z630S smartphone. It was just works very well and connect to my ACER laptop with ease but one day, that I was not able to transfer files to my laptop via a USB cable. My mobile is not detected by my knees as a media transfer device. The camera mode is activated which leaves a lot of data in my mobile... When I checked with troubleshooting, windows said that some driver is missing/corrupted. Cannot install driver downloaded from the Acer site. Kindly help

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to all names, email addresses, telephone numbers, full of serial numbers, etc.]

  1.) make a right click the yellow "!" and select "update driver".
  2.) when the option to connect to Windows Update, select "no, not this time" and click Next.
  3.) choose "Install from a specific location (Advanced)" and click Next.
  4.) select 'don't search. I will choose the driver to install"and click Next.
  5.) click on the button "floppy". Navigate to C:\Windows\inf and choose the file marked 'wpdmtp.inf '.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/solved-MTP-not-working-on-Windo...

  or

  (1) go to C:\Windows\INF

  (2) type "wpdmtp.inf" in the search provided to the right of the address bar in Windows 10 bar.

  (3) once you found, just right-click on it and select Install. Very, it will take a few seconds.

  (4) connect your device to the computer.