Cannot connect by Satellite C660D to my LCD TV

Similar Questions

• Cannot connect my Satellite L20 to AP

  Hello
  I have a satellite L20-214, just bought it and an edimax 7205 ap.
  Both supported the 80211b specifications.
  Access to the AP is completely open!
  But I can't get the laptop to connect.
  He sees the network in the list, but it just cannot connect to it.
  I tried all settings,
  The access point works perfect with smc cards and a few old books.
  I set all the possible settings in the config of Toshiba, disabled the encryption, change the channel to 1 because it is the channel of pref. of the ap and choose 80211b as prim.

  For now, I'll give some further tests before I have to return the laptop to the store because it's brand new.

  But I hope someone has an answer for me.

  [Edited by: admin on 28 May 06 06:28]

  Hello

  Also check if you can find the latest version of the driver for the WiFi card. Also check Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Cannot connect by Satellite A210 of WLan

  Hey,.

  I installed Windows XP on my disk hard of one another. I installed all the drivers, but when im want to connect to my WiFi,
  they say "cannot connect to the W - Lan, W - Lan not scope, or has been turned off. "Try again". Or something like that

  Hello

  You are looking for in this forum for similar issues and proposals of solution?
  Do this! There are enough discussions on these issues.

  What have you already tried to solve this problem?

  I mean that should first be the Wlan.
  Then you should put a right SSI, encryption, and password encryption.

  Did you do that?

• Cannot connect by Satellite P750 to TV via HDMI

  Hello

  I am trying to connect a Satellite P750 with Windows 7 to a TV via HDMI and have had no success.

  I tried without success to the following:
  1. I chose F5 function to extend the desktop with desktop + HDMI, but also just HDMI only
  2. I tried the windows P for the use of projector function
  3. I tried different TV including Panasonic and Sony Bravia
  4. I tried another HDMI cable, I use my Xbox with
  5. in the devices section, I can see the TV is added and tried to change the settings, without success
  6. when I looked online for a solution, a solution was to download HMDI Control manager.
  7. After installing it and when I tried to use it, I got the pop-up message "using the HDMI control, you must activate it.

  So I was wondering if the HDMI port is not properly enabled. According to me, he works one way or another, otherwise the computer would not be able to detect the TV when connected.

  Can you please offer any assistance?

  > 1. I chose the F5 function to extend the desktop with desktop + HDMI, but also just HDMI only

  And what exactly happens if you press Fn + F5?
  You see the Toshiba Flash Cards appearing at the top of the screen menu while pressing FN + F5?

  Please note that the output screen must be changed before you start to play a video.

  Right channel/HDMI port is chosen in the settings of your TV?

• Cannot connect by Satellite Pro projector if more than 3-4 m cable

  We have several laptops - and we have never had any problems that they might know an external projector.
  The length of the cable is normally around 10 m.

  Our Toshiba Satellite Pro laptops can only connect to an external projector if the cable length is less than 3 to 4 meters.

  What shall we do?

  Hello

  > Our Toshiba Satellite Pro laptops can only connect to an external projector if the cable length is less than 3 to 4 meters.
  It seems that the video signal is too weak and he cannot reach the appliance connected to the end of the cable.

  I found this info useful on this page that explains this behavior:

  + A normal PC, notebook or tablet PC VGA signal is not designed to operate on long cable runs. +
  + You can find only one kind of PC or laptop will work with a long cable to projector, and another type of PC or laptop may not work. +
  + However, this does not mean that the second computer is down. +

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC333092

  _Solution: _
  The VGA signal must be amplified before it can be sent to the bottom of a long cable. These symptoms are all indicative of weak signal problems (or bad wiring).
  You should always use an amplifier VGA (active), Terminal VGA box (active) or a switching VGA (active) unit when you use along the VGA cables

  Good bye

• Cannot connect by Satellite A355 for a Canon IP Pixma 5000 on a LAN

  Recently, we purchased the Toshiba Satellite A355-S6925, which has the operating system Windows Home VISTA 64 bytes.
  The Canon Pixma 5000 printer is directly related to a Windows XP-based computer by using the 32-bit operating system.

  When I go to add a printer (Option LAN) the Toshiba sees Canon printer but then returns an error message that there is a bad driver. When you go to the next step, it says that it cannot find the correct "INF". I suppose the INF file is actually on the remote computer on which the printer is connected to. So a question, where is an INF printer on a Windows XP computer?

  A test, I plugged the printer directly on the Toshiba and the loaded Toshiba driver the printer. I hoped that could solve my problem, but it didn't. When I tried to add the printer, once again, like a remote printer I got the same error message that it could not find the INF file.

  The "Add a printer" Wizard see Canon printer on our LINUX computer. In fact when I added the printer connected to the LINUX computer, I can print from the Toshiba. While this works, it's a bad solution, because I'm still not able to print directly to the remote printer.

  Another experiment, I tried to use the printer installation disc, this was rejected by the Toshiba since he was a pilot of 32 bytes. I also downloaded from the site Web of Canon driver 64 bytes, but once again the Add Printer Wizard said that there was a missing INF file... So I always assume that I need to point to an INF file that is located on the Windows XP computer?

  Any advise?

  Great news and thanks for your comments!
  On the State of ink, you may have to contact the manufacture of the printer.

  Good day!

• Cannot connect the Satellite A660 to WLan - card not found Intel

  I unboxed it today and connected to my home wireless network. Everything was fine.
  I propose then my laptop in the living room where the router and the modem is, the connection dies less than a minute or two.
  Then he says that there are no networks in range at all, cannot detect everything.

  I troubleshoot it and the results are: he says: problem with the router / access point is fixed; and another notification that says a network cable is disconnected or may be broken. I have no cable so idk why he tries a wired connection. I reset my router and tried everything.

  I take her back to połączyćto left home in my room and it works fine, no drop outs.
  It's all new, satellite a66. I made sure that my data was on and the wifi is good.

  Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...

  Thank you.

  JD

  > Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...
  Because of this message, I would recommend checking the status of the WiFi (WLan card) adapter in Device Manager.
  You could uninstall the WLan driver in Device Manager.
  Then you need to download the latest driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  and should install the new drivers.
  Reconfigure the Wlan connection and test functionality.

  PS: Please make sure that the WiFi was enabled (FN + F8) before trying to set up the connection.

• Cannot connect by Satellite L300-1BW to wireless technology

  My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

  It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

  I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
  I can see all the networks concerned, but it won't take me actually to my homepage.

  I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

  Hello

  You can see the WLan, which means that the WiFi is enabled correctly.
  But have you used the good encryption and encryption password in order to connect to the WLan router?

  Please check this!

  Please also check the firewall settings!

• Cannot connect by Satellite A305 Linksys WRT160N wireless

  I have a Satellite A305-S6839 with Windows Vista Edition Home Premium that I tried to connect wireless to a Linksys Wireless - N WRT160N router but I am unable to get the service.
  I can configure the router and it transmits properly, but for some reason that I can't connect to it. I tried to reboot several times that the manufacturer suggested unplugging the cables, but that did not work. I suspect that there are drivers I need to download for this operation.

  Someone give some advice?

  First, visit the Toshiba support site we and install the latest BIOS and Wifi Driver.

  Second, try to change the Wifi settings-Wifi card-> properties > Device Manager. Increase power output, select "802. 11 g-only", turn off energy-saving.

• WLAN cannot connect on Satellite A300

  Hello

  I just bought a Toshiba A300-1MC, laptop and I am able to connect to the internet using an ethnarnet cable, but cannot establish a wireless connection - laptop does not recognize a wireless peripheral connection (the wireless button on the front of the laptop is turned on) - any suggestions?

  Thank you
  Neil

  Hello!

  Do you have the yellow marks in the Device Manager and installed the right driver?

  You should check if the laptop and the router use the same standard.
  And you can try to disable all the security settings on the router. I mean disable encryption, SSID hidden settings, MAC address filtering, firewall and so far.

  Sometimes it's good to load the factory settings on the router and a new configuration.

  Good bye

• Cannot connect by Satellite A200 - 1 X 1 to two hubs of WLan

  Hello

  having a problem with the connection to a new laptop A200 - 1 X 1 with the wireless card Atheros for 2 different wireless home hub.
  I'm assuming that its todo with the Atheros card not taken support WPA / WPA2 a, b, or g mode.

  Can someone confirm please.
  If so, it will connect using WPA mode with draft 11n wireless hubs?
  If this is the case, install the 3945ABG card Intel would work in this phone?

  If so, how easy is it to spend?
  The laptop is used by my mother who lives away from me for more than 3 hours.

  I can get the card for about £15 Inc., but I want to know if he's going to cure the problem.

  See you soon
  Nick

  I have Satellite P200D with Atheros AR5007EG Wireless Network adapt and use at home. WLAN is encrypted using WPA and for the speed of data transfer, I use standard g.

• Cannot connect my Satellite L500-1WG to Wi - Fi router Netgear

  Hello

  I hope someone can help as Im pulling my hair out. Just replace an old Wireless ADSL router/modem to a "n" wireless Netgear DGND 3300 range Max Dual Band router ADSL. Everything is connected by ethernet to my Office PC Ok. Just bought a laptop L500-1WG with 'n.' compatible wireless card

  Hope to connect to the 802 1.1n 5 Ghz to speed things up and increase will however the laptop cannot find the adapter 2.4 Ghz 'G' and its driving me wild! Ive downloaded the latest drivers and checked in the device manager that "n" is selected. I messed around with the settings of the modem to the router and it seems to all be OK but can not connect, someone at - it ideas? Thought I would have the ability to connect via G or N...

  Your help is appreciated...

  And what is with the settings of the WLAN router? You are using auto option or you have assigned it N only?

• Cannot connect by Satellite P100 using WPA WLAN encryption

  I got a Satellite P100-160 with Vista home premium and tried to connect to my wireless network having WPA security without success. Is it possible to make this work? My router is a SMC and their assistance service said I should look for an updated driver.

  Is there a driver? The card is an Intel Pro/wireless 3945abg.

  Hello

  I don't really know what the problem may be, but if possible, try to install the latest Intel driver. You can find it HERE

• Cannot connect my Satellite A200 with my Headset HBH-PV708

  I have laptop Toshiba Satellite A200 with Win Vista Home Premium.

  My Blootooth recognizes and connects everything right from my mobile phone NOKIA, but NOT NOT connect my Sony Ericsson Bluetooth Headset HBH-PV708.
  Could someone help me please to solve this problem?
  I would like to use the headset with my SKYPE.

  Thank you.

  I wonder if you can connect if you enable 'link level apply secuirty... '. "in the Bluetooth Options > Security > custom level

• Cannot connect by Satellite Pro U400 - 13 k with mobile phone via BlueTooth

  I have a laptop Sony-Ericsson (cyber shot 905) and I can not connect with my computer laptop Toshiba Satellite Pro U400 - 13 k.

  I mean the bluetooth connection.

  What should I do?

  Make sure your Bluetooth is running on the side of the laptop.
  Ensure that Bluetooth is activated on your phone and it is detectable.
  What you intend to do?
  Using XP or Vista?