Cannot connect by Satellite L300-1BW to wireless technology

My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
I can see all the networks concerned, but it won't take me actually to my homepage.

I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

Hello

You can see the WLan, which means that the WiFi is enabled correctly.
But have you used the good encryption and encryption password in order to connect to the WLan router?

Please check this!

Please also check the firewall settings!

Tags: Toshiba

Similar Questions

  • Cannot connect by Satellite L300 wireless access point

    I have a new laptop L300 & I can't connect to the laptop to my wireless access point. I have an another mobile E-sytems with the same hardware Realtek RTL8187B & it connects without problems.

    The machine has the free two month Mcafee subscription & I have disabled all the protection incase that was causing the problem. I updated the driver for the wireless card & the bios on the Toshiba site, but nothing is.

    Can someone shed light on this problem because the laptop is only two weeks old?

    Thank you...

    Hello

    To connect the laptop to the WLan, it must ensure that everything is enabled and configured correctly.
    You should check these points:

    -activated the WLan with the WLan switch and the FN + F8
    -don t use any 3rd party config tools WLan if you use the WLan configuration options own Vista
    -for the first test WLan disable the security settings of the Wlan router
    -configure settings to laptop as good SSID and search for your wireless local area network
    -After that the laptop is connected to the WLan router, you can turn back the security settings (encryption, mac address filtering, firewall, etc.)

    Welcome them

  • Cannot connect by Satellite A305 Linksys WRT160N wireless

    I have a Satellite A305-S6839 with Windows Vista Edition Home Premium that I tried to connect wireless to a Linksys Wireless - N WRT160N router but I am unable to get the service.
    I can configure the router and it transmits properly, but for some reason that I can't connect to it. I tried to reboot several times that the manufacturer suggested unplugging the cables, but that did not work. I suspect that there are drivers I need to download for this operation.

    Someone give some advice?

    First, visit the Toshiba support site we and install the latest BIOS and Wifi Driver.

    Second, try to change the Wifi settings-Wifi card-> properties > Device Manager. Increase power output, select "802. 11 g-only", turn off energy-saving.

  • Satellite L300-1BW - wireless connection stops working after 10-15 minutes

    Hey!

    Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

    When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

    I know full well it's not my Netgear because it work fine on all the other my computer.

    IM wondering if anyone could possibally help me. I would be grateful anyhelp.

    Thank you.

    Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

    Hello!

    If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

    In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

    Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

    Good bye

  • Satellite L300-1BW - Wireless fails atfer a few minutes

    Hi people, thanks in advance for all advice offered.

    I have a Toshiba laptop Satellite L300-1BW, when I turn on the wireless connection would stay for around 10-15 minutes and turns off, when I run the arrow on the internet logo it wont even pick up wireless.
    I have to restart the laptop wireless to start again, but lasts almost 5 minutes.
    My other laptop stays connected without problem if is not the hub.

    I already did it on the following link
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165940.

    I have updated all drivers/BIOS... Wireless drivers. My drivers are Realtek...

    It made me confused bigtime.

    Please someone help!

    Hey,.

    What operating system you are using? It's the operating system preinstalled Toshiba or your own installation?

  • Satellite L300-1BW - Vista cannot initialize properly

    Daughter has started nine laptop Satellite L300-1BW and can t use the laptop as their was a problem
    I need help to fix it.

    Windows Vista won t even not start. I put t know what is the problem.
    Diagnostics, he said that it s a root problem.

    Any help?

    Result of successful complete event log diagnosis
    error code = 0 x 0 time = 78 mins test internal State
    Code of erro chk full result sauce time = 0 x 0 = 31 mins
    Test test res com sauce eror code boot state = 0 x 0 time = 47 mins
    installation state chk com test result = 0x0 time = 452 mins
    found root cause failure current seup
    syastem details session disc = \device\ harddisk0 repertoire_windows = c:\windows autochk run = 0 root causes of num = 1 chk test updates comp error code from success = 0x0 time = 0 ms test disk diagnostic comp sucsees eror failure code = 0x0 time 94

    Root cause found - failure while playing.
    Also the Vista laptop, is a Toshiba Satellite L300-1BW 415,4 base all Toshiba more round, loading of innovation.

    Any help would be appreciated if anyone knows how to solve this problem and it didn t come with a Vista disk or recovery

    Thanks celticman

    Try the laptop from the recovery of HARD drive partition recovery.
    Do you know how to start this process? Isn't it?

    Immediately after the laptop has been turned on, press the F8 key.
    Then choose the first option called fix my computer
    Then choose recovery Toshiba (last option in a new window)
    Now the HARD drive should products.

    I think this should help you reinstall the Win Vista again and finally the installation of Vista successfully

    Good bye

  • Satellite L300-1BW - WLan disconnected about 10-15 minutes

    I own the:

    (Toshiba - Satellite L300-1BW)

    I thought I fixed this problem last night.
    Unfortunately, I was wrong. So far I've updated driver and BIOS on my laptop.

    My problem:

    OK so my internet works fine wirless thought when my laptop is not charging.
    However when the AC adapter is connect and the laptop is charging that the internet connects for about 10-15 minutes then log off, forcing me to reboot my laptop to get the internet working again.

    I'm on Vista Home Premium window and would appreciate any help what so ever.

    I looked through the forum and not yet fallen on a problem simular to mine.

    Thank you

    --

    Edit: Just checked the powersaving parameter and seen the the box "allow the computer to turn this device to save power" is checked, I uncheck the to solve my problem?

    > I thought I fixed this problem last night.
    I think you're talking about your first thread:
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=165938

    > Edit: just checked the setting of energy-saving and saw the box "allow the computer to turn this device to save power" has been checked, I uncheck the to solve my problem?

    You certainly need to deselect this option because if she checked s then the cell phone would turn off / Unplug the WLan card to save battery.

  • Satellite L300-1BW - 19 on CD/DVD drive error code

    Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

    I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

    Any ideas anyone? ?:|

    Hello!

    Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
    http://support.Microsoft.com/kb/314060

    (1) run Regedit (start > run > Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Good bye

  • Satellite L300-1BW - max memory per slot

    Hello

    I have a problem with my L300-1BW. Recently, I replaced my memory and upgrated to RAM 2x2gb.
    As I replace my Celeron T1600 1.6 Core 2 Duo T7500 2.2 my Toshi proc get so much that I consider myself as RAM upgrade even more.

    We might find that L300-1BW plug here:
    http://www.Toshiba.co.UK/discontinued-products/satellite-L300-1BW/

    And it says: "maximum extension: 4 096 MB.

    I was wondering if it means limiting 4-GB PER SLOT? OR TOTAL?

    I'm stuck, cause I typed "dmidecode t memory" on my OS of mint and stated as follows:

    Memory controller information «»
    Error detection method: no
    The capacity for error correction:
    None
    Supported Interleave: one-way Interleave
    Current Interleave: One-way Interleave
    Maximum memory module size: 4096 MB
    Maximum total memory size: 8192 MB

    Physical memory
    Geographical area: motherboard or motherboard
    Use: System memory
    Type of Error Correction: no
    Maximum capacity: 8 GB
    Handle information error: no error
    Number of aircraft: 2 "

    It's 8GB maximum. is true?
    Want to be 100% sure, as only 4GB DDR2 SO - DIMM module is quite expensive.

    Thanks in advance for any kind of support in this case.

    Hello

    This laptop supports the Mobile Intel GL40 Express Chipset
    According to the Intel ARK page this chipset supports max 4 GB of RAM
    http://Ark.Intel.com/products/35501

  • Satellite L300-1BW - is very slow

    Hello world!
    Recently, I bought the TOSHIBA SATELLITE L300-1BW (PSLB8E)
    Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE & partNumber = PSLB8E-03F007EN & serialNumber = Y8805872q & USER_ACTION = 20number % series

    I need it for my study and using home. Computer runs VERY slowly. Now I have a version of Windows XP Pro SP3 64 bits. The programs that I have only Ms Office, Skype, Nero, antivirus - BitDefender. I play all the games. IM from the application for my study only - using Ms Word.

    My computer has been verified in the service center and no defects of any sore - not any software and hardware, virus damage, no all manufacture faults. The owners of these model please give me advice what to do. I stuck!

    What should I install Windows XP 32 bit or install Windows 2000 or upgrade hardware (memory... whatever)? I won't be disappointed by TOSHIBA!

    Evil appreciate any HELP!

    Hey Buddy,

    Can you be a little more detailed, please? What do you mean with very slow?
    How long it takes so that it starts Windows?
    How long it takes to start an application?

    I have to say that Windows XP 64-bit wasn t popular and there is no official support for Toshiba for this OS. If you use Windows XP, I recommend to install the 32-bit version.

    Did you test your laptop with the factory settings? It works properly with a preinstalled OS from Toshiba?

    I m also owner of the Satellite L300 and I use the preinstalled Windows XP 32 bit of Toshiba. I m very satisfied with this laptop, it s fast enough and need very little energy. :)

  • Satellite L300/L300D - active wireless Radar says disabled

    Toshiba Satellite L300/L300D series - wireless active Radar says disabled!

    Config Free, Radar reports "this wireless network device is disabled. Please activate the device.
    The message displays a chart of the switch forward on the laptop wireless in the switched (in most left) position.

    The switch is in the right position the more and the small air icon is on.
    The wireless network card is an Atheros AR5007EG and is enabled in Windows 7 (64-bit). Ipconfig/all cmd.exe does NOT list the wireless adapter card only the integrated LAN. The network adapter works without difficulty.
    Windows 7 Device Manager displays the map as operational wireless - 09/21/2009 driver date, version of the 8.0.0.225 driver.

    Toshiba model No. PSLC0E-02U00DEN Toshiba serial 19439765Q. The same problem occurred in Windows Vista.
    With the "disabled" (according to Radar) wireless card no wireless networks are visible to the laptop.

    What should I do to get the wireless working card?

    Hello

    Did you choose the service Wlan using FN + F8 buttons configuration?
    Please do! It s is not enough to just change the hard WLan switch position.
    In addition, you must use the FN + F8 buttons to activate the WLan.

    If it would not help, please update the WLan driver!
    You can find the latest drivers Toshiba WLan portal page
    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

  • Satellite - L300-1BW: how to check warranty registerd.

    Hello.

    Registerd just my warranty for my Toshiba Satellite - L300-1BW.

    I was wondering if there is anyway that you can go to see just how long/much guaranteed, have left you.

    Thank you.

    Hello

    Maybe I can help you.
    I found some forum discussions which includes this page from Toshiba:
    www.Toshiba-tro.de/unitdetails

    You will find many details about the registered model of laptop.

    Check it!

  • Cannot connect iphone or android smartphone residential wireless. PC running windows 7.

    Cannot connect iphone or android smartphone residential wireless. PC running windows 7. tried to use wep and wap without help. Use the belkin router. have a red symbol blinking on router during a connection attempt. No permission on the phone message.

    Hi MarvinCohen,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem, you want to establish a connection to homegroup between Windows 7 devices and iphone or Android.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    A homegroup is a group of computers on a home network that can share devices such as Printers and libraries (Documents, photos, music and video libraries). PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup.

    Using a homegroup allows for easier sharing, but if you want to connect the phone then unfortunately, I must inform you that you can not connect mobile phone or android device to a homegroup connection.

    See the article for more information.

    Home Sweet homegroup
    http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

    Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with to join the homegroup, I'll be happy to help you. We, at tender Microsoft to excellence.

  • How to connect my Satellite L300 to TV?

    Hello...

    I have a Toshiba Satellite L300 - 2 4 and want to connect my Toshiba 32HV10E plazma

    The tv has a hdmi input, so I bought VGA adapter and connect it to the computer

    Unfortunately, it does not work.
    The computer recognizes the TV, but not the same with the plazma

    Anyone?

    Eventually he s a problem HDMI VGA adapter.
    The point is that you cannot convert the analog signal into a digital signal (VGA to HDMI)
    You can convert digital to analog (VGA/HDMI)

    As far as I know the TV supports a component port.
    So, try using a VGA adapter - component cable.

  • How to connect by Satellite L300-1 has 3 on TV?

    I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.
    I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see the image on the TV?
    I need software for that, or I did something wrong?

    Thank you!

    Hello

    All LCD televisions have several video - in different ports and what you should try is to use the VGA-to-RCA cable.
    Your TV must have port cinch. Connect your laptop to the TV, turn on RCA TV port and then use FN + F5 key combination to switch the LCD TV.

    Please let me know if this work.

Maybe you are looking for

  • hashChangeInit

    Get an error window on each page at sfgate.com that says: hashChangeInit doc domain is: sfgate.com How can I fix this in Firefox 3.0.19. ?

  • If I buy a 6s and restore from a backup on computer, I also get old iOS?

    I have 8.3 on my current iPhone 6. I'm considering upgrading to a 6 s iPhone, but I don't particularly like iOS9. If I restore from the back up on top of computer, will I have the old iOS? I don't think that it really works it, but I'm not positive.

  • Update of Vista is 0% complete and the computer shutsdown

    Laptop of my son is cycling with the message "Configuration updates: stage 3 of 3-0% complete.".  Do not turn off your computer' it then stops after a 30 seconds and automatically restarts the same message.  Help please.  Tom

  • AutoCad and using the LaserJet Pro CM1415fnw

    I use Asus with Windows 7, 64 - bit with HP LaserJet Pro CM1415fnw, connect via the net, usb and wireless. I use AutoCad, but when I try to print, the AutoCad stops. Can print I have all other programs, without problem. Have tried to install the new

  • "The file is not found."

    I imported the images into Lightroom, but when I tried to change to 'Develop', a notice appeared "this file is not found." What can I do to access these images for editing?