Cannot connect by Satellite L300 wireless access point

Similar Questions

• Cannot connect by Satellite L300-1BW to wireless technology

  My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

  It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

  I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
  I can see all the networks concerned, but it won't take me actually to my homepage.

  I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

  Hello

  You can see the WLan, which means that the WiFi is enabled correctly.
  But have you used the good encryption and encryption password in order to connect to the WLan router?

  Please check this!

  Please also check the firewall settings!

• Cannot connect my HP printer, WiFi access point

  Just moved to the town house. Receive internet through wi fi on my phone access point.

  Could not connect to my wireless HP5510 printer. Toshiba laptop.

  I tried everything I can think of. Help

  The link below will take you to a copy of the Manual printer. There instructions to connect to a wireless network. Check with the provider of the solution hotspot if and how a printer can be used with the hardware/software.

  This printer is connected to the Toshiba via a USB cable. HP does not provide this cable with the printer you will need to acquire a leave of a computer supply store or somesuch.

  Manual of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?product=5063582&LC=en&cc=us&DLC=en&JumpID=oc_r1002_usen_s-003_r0001&lang=en&cc=us

  Driver and Firmware:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5063582

  Note that the new firmware is available for this printer. Download and install the firmware for the printer according to the instructions. Then, restart the computer and install the driver software. Follow the prompts on the screen. Do not connect the printer to the computer until directed to do so by the instructions.

• Can I use my Satellite P10 as Access Point?

  Satellite P10 wireless access point

  Please can someone help?
  I have a laptop wireless by Satellite P10, can anyone tell me is it possible to set up the laptop to share my Internet remotely even if its WiFi, so it can be picked up by my Sony PSP. Then my cell phone would act as a wireless internet access point.
  As I do not have a router, don t know if it is possible this way any ideas?
  Thank you Michael.

  Hi Michael

  Well, I m not sure if it of possible the Sony PSP to connect to the laptop and if it works, but I found several useful information how to create make it the network connection wireless home in Windows XP without a router. Please check this links.

  http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx

  http://www.annoyances.org/exec/show/ics_xp.

  Good luck

  Good bye

• Use WAN connected airport Time Capsule as a wireless access point

  I had to replace a failed 4 Gen Time Capsule. I tried to install a new Gen 5 airport TimeCapsule via WAN and set up the airport to act as a wireless access point. It is installed in an area of my house with wireless coverage. In the network of AirPort Utility Mode section, I chose "extend a wireless network. The TC is restarted, I get an error message cannot find the intended wireless network.

  What I lack?

  "Extend a wireless network" is a parameter that is only used if the time Capsule need to connect to another router from Apple with the help of a Wi-Fi connection.

  You use Ethernet to connect, you must use the parameter to "create a wireless network. Use the same wireless network name and the same password as your "primary" router

• There is no communication between devices that are connected to the Linksys WAP4410N Wireless access point?

  Hi all

  I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.

  Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.

  Advance thanks.

  Thank you and best regards,

  Chandhuru.M

  Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

  The title of security without thread/how do you have isolation set up wireless?

  Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless

  Thank you

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  CCNA, CCNA-wireless

  866-606-1866.

  Mon - Fri 09:00 - 18:00 (UTC - 05:00)

  * Please rate the Post so other will know when an answer has been found.

• Errror: The certificate chain was issued by an authority that is not approved. connecting to a wireless access point

  I can't understand the process of certificates, by connecting a pc wireless access point that is authenticated by the radius server, im keep having this error "the certificate chain was issued by an authority that is not approved." do I need to set a certificate on the pc?

  Hello

  1. What is the version of the operating system that you are using?

  2. What is the exact full error message?

  If you use Windows 7 follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/view-or-manage-your-certificates

  http://Windows.Microsoft.com/en-us/Windows7/certificates-frequently-asked-questions

  You can also contact your ISP for more information.

  Hope the above information is helpful.

• The WRT600N can connect to a wireless access point?

  I installed Windows 7 on my desktop and I was not able to install all types of Linksys wireless adapters.  I decided that linking an my WRT600N wireless access point in the other room and hardwireing the office to the access point, would be a good idea.  I'm probably going to connect it to a Net WTG624 Gear, which is capable of acting as an access point and you connect to another router.  The question is, can the WRT600N you connect to and use the internet and the local access and, ultimately, on the Office of cable?  I feel that it is one of the most stupid questions, I ask myself here again, but I'm not sure.

  EDIT: I'm sure it's called Wireless Bridge.

  Thank you

  Zach

  Hello Zach,

  The WRT600N can connect at the point of access, and vice-versa. I have a WRT600N home and have the same model of NetGear as access point (what are the chances?) and it works fine, although I do miss the 5 GHz as the Access Point is only 2.4 Ghz 802.11 g Standard.

  I hope this helps!

• Win 7 cannot connect to internet, found wireless & LAN network but cannot access the internet.

  I've updated my laptop lenovo Y430 to Windows 7 Home Premium about 6 months ago, it has been working fine until last week, I just can't connect to the internet more. I used to use a wireless network, now it says that it is connected to the network, but 'no internet access', while the signal says it's just. I also try to always use the Wired internet, not luck, and worse yet, he says no 'identified Network/No access to the Internet.

  "I have troubleshooted, that is the message he gave me: 'Connection to the Local network' is not a valid IP Configuration.

  I run 'ipconfig' cmd and this is what gives me:

  C:\Windows\System32>ipconfig

  Windows IP configuration

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::e99e:3f78:35 c 3:7056 %11
  Autoconfiguration IPv4 address. . : 169.254.112.86
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  C:\Windows\System32 >

  and I've run ' ipconfig/all', that's what I got:

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: salt - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Intel(r) WiFi Link 5100 AGN
  Physical address.... : 00-16-EA-DC-69-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1E-EC-96-77-04
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e99e:3f78:35c3:7056% 11 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.112.86 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 234888940
  DHCPv6 DUID customer...: 00-01-00-01-10-38-1C-FD-00-1E-EC-61-19-2C

  DNS servers...: 85.255.112.123
  85.255.112.234
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Please answer asap, HELP!

  Thank you.

  Sincerely,

  Evan

  

  Yes.

  Routers and switches are different types of network devices.  Routers are "smart".  Switches direct network traffic between computers on a single network, while routers can act as the interface between two networks (for example, the Internet and your Local network). There are many explanatory pages on the Internet about it. Here'sa .

  Actually, most "routers" sold for home use today incorporate both a switch and a router (and in the case of "wireless routers" also incorporate a wireless access point). Routers include usually a (NAT ) network address translator, also a DHCP Dynamic Host Configuration Protocol (), a proxy of domain name Service (DNS) server, and a hardware firewall to protect the local network from malicious intrusion on the Internet.

  Your provider of Internet service through your cable modem, "sees" the WAN port of the router, as a computer (which is) generally configured to automatically obtain its IP address.  The ISP's DHCP server assigns this port the only IP address that is allowed to you.  It is an 'external' or 'public' IP address, and this is the address that other computers elsewhere on the Internet use when they drive traffic to you.

  The router's built-in DHCP server assigns 'private' IP addresses for each of the computers connected to TI (no matter if they are connected by wire or wireless).  As a general rule, these are of the form 192.168.1.x or 192.168.0.x, where x goes from 1 to 254.  These IP addresses are not 'seen' by computers on the Internet.  Instead, the feature NAT on the router directs traffic to your public IP address to the correct of your internal computers (and vice versa).

  A switch can't do it all.  If your authorized service provider, you can connect to your switch directly to your modem and the ISP's DHCP server assign an IP address publicseparate to each computer connected to the switch.  Because your ISP does not allow more than one public IP address from your account, its DHCP server assigns such address to the first computer he sees connected to the switch.  If several computers are then connected to the switch, the ISP's DHCP server simply ignores them: too bad, computer #2, you do not get an address, and so you can't connect to the Internet.

• After running Thinkvantage System Update, unable to connect the wireless access point

  I've recently performed Thinkvantage System update for updating various programs/drivers on my T61p.  I've updated the V5.12 access connections.  In addition to this I was required to update driver V1.52 power management and functionality of the shortcut key for

  V2.10.0002 (two of them were the most recent available).

  After these updates, I can connect is no longer to any access point wireless that worked before this update.  I have tried to reinstall earlier versions of Access Connections, but still couldn't connect to wireless access points.

  ANY help would be appreciated.

  OK, problem solved.  I found that when I ran last weekend system update downloaded and installed an incorrect driver for my wireless hardware.  I installed the correct driver and now the connection to a wireless access point works.

  Certainly, I don't understand how/why not update system would be to download and install an incorrect driver.  VERY FRUSTRANT and TEDIOUS!

• Windows cannot connect to the printer. Access is denied.

  From: Steve

  Desperately, I try to print from my laptop Windows Vista Home Premium to a shared printer on my home wireless network.  The shared printer is connected to a XP Home machine.  This machine is wired (via a LAN cable) to the wireless router.  I can 'see' the printer that I want to use but trying to to connect to it. I get the error message "Windows cannot connect to the printer.  Access is denied. "I would be grateful for any help.

  Kind regards.

  -Steve

  From: Alan Morris [MSFT]

  Since the XP machine is HOME, I don't think that the permissions dialog box is accessible.

  Run the XP network sharing wizard again and see if it affects safety correctly on sharing.

  Is the printer you share one that has drivers provided with Windows XP?

  In the meantime we will at least get the printer works for you.

  Create a local printer on Windows Vista; Creation of a Local Port in the form \\XPMACHINE\Printsharename (this will send the files by using the redirector instead of the RPC service).  Install the Windows Vista driver for the device.

  You can print because print$ access is required for printer drivers.

  -Alan Morris

  Windows printing team

  Another response of the community of Windows Vista discussion groups

• A WRT160N V3 can be used as wireless access point.

  I have an AT & T's broadband router.  A WRT160N is connected, so I now have Wireless N capabilities.  I have a second WRT160N I want to put in my living room as a point of access, so I can connect my BluRay player and video stream.  How can I configure the second WRT160N as access point?

  Thank you in advance,

  Andrew

  Topic 1. Yes, you can use your second WRT and put in place as a second access point to your network. First of all, unplug the second WRT to your network and wire a computer in one of its LAN ports. Open the web interface at http://192.168.1.1/ on the main configuration page, change the address LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server. Save the settings. Unplug the computer and connect the cable to the first router on one of the second router's LAN ports. Do not use the internet port of the second router! Now you can use the wireless access point in the second router as access point additional for your network.

  For a wireless roaming the two Wrds with identical wireless settings (SSID, wireless security, etc.) and don't forget to enable the SSID broadcast. Only the channel assignments should be different. Different channels spaced at least 5 avoids duplication of canals. Now your laptop can connect to your network via either WRT and internet through the first WRT. It must also be able to move between the two Wrds without losing the connection.

  Re 2. Because the WRT160N has only the ethernet 10/100 ports a CAT5e cable should do. Of course, you can consider getting a better cable, for example a cat6 for future enhancements to your network. It depends on how much effort it is necessary to replace the cable later if you decide to go for gigabit ethernet on your local network.

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

• Card wireless INTEL PRO 2200 BG - don't find any wireless access point

  I just try to run internet with the internal PRO INTEL BG 2200 wireless card.
  The driver version is just updated to 9.0.4.39. The problem is, I can't find any wireless access point.

  I also use a D-Link card, with this card, I found the available access points. What could be the problem with the INTEL PRO card. I'm sitting right next to the router/hub.

  Also, I thought that I might need to activate the wireless with additional keys Fn function, but they do not work, I guess. Maybe I need a driver for this tool also. Do anyone know where I can find drivers to use the Fn keys?

  My system:
  TOSHIBA Tecra
  WINDOWS XP (SP 3)

  See also: The INTEL internet LAN works.

  > What could be the problem with the INTEL PRO card. I'm sitting right next to the router/hub.

  For me, it seems that the WiFi network is not enabled.
  Usually, you need to activate the WLan switch which is placed on the side of the laptop. Then, you'd see an active WLan led.
  If you n t see the light, then the WiFi network has not been activated.

  In addition, choose the WLAN using FN + F8!
  You can also activate the Wlan in Device Manager-> card Wlan-> properties-> Advanced tab.

  Good bye

• configuration cisco air-ap1142n-a-k9 problem wpa2 wireless access point

  HI people,

  I am brand new to Cisco Wireless, just that I bought new wireless access point air-ap1142n-a-k9 cisco, try to configure the configuration of wpa2 for security reason, but impossible to configure in any mode security. So my AP is currently no security / encryption mode.

  Could someone can help and suggest me I will appreciate if I get all documents, so the security problem can be solved.

  Concerning

  Sanjeev

  OK great

  ----------------------------------------------------------------------------------------------------------------------

  Be sure to note the correct answer and mark the thread as answered