Cannot connect camera Basler USB 3.0 to IMAX

Similar Questions

• Help! Cannot connect camera Linksys

  Hello

  My camera works very well, my TZO set up was OK, etc... All of a sudden, I have logged on to the page of the camera and made some changes, to save the changes. Now I'll get my login page camera via the web and just http://xxxxx.linksys-cam.com page, it expires and cannot enter the page more. I don't want to do a reset of the camera don't want to lose my configured settings. Is it possible to get the problem to my camera page without changing anything and try and cancel the configuration changes that got this started, I made? Thanks for any help out there.

  Death,

  The fixed! Not had not from scratch, just hard wire connected to the router, which is brought to the top of the camera page, undid my previous changes, disconnected electrician and recharged via wifi and voila! Everything back to the way it was and works very well.

• Cannot connect camera Canon Rebel for Windows 7

  I got a Canon Rebel camera with a large memory chip. My old printer had a port for the chip but my other does not work.  When I connect my camera directly on my computer Windows 7, I get "Canon camera has not a driver", nor can it find a driver on the web. I know I downloaded the images from this camera before.   How ca I download the images?

  Wednesday, October 3, 2012 20:56:59 + 0000, richardsloat wrote:

  I got a Canon Rebel camera with a large memory chip. My old printer had a port for the chip but my other does not work.  When I connect my camera directly on my computer Windows 7, I get "Canon camera has not a driver", nor can it find a driver on the web. I know I downloaded the images from this camera before.   How ca I download the images?

  You can buy a USB memory card reader very little expense. TO
  Amazon.com, they begin to 1.46 USD.

  I always prefer using such a reader, rather than connect the camera.
  The drive uses no battery in the camera and it's quick and easy to
  use.

  I have two of these drives. An I keep on my desk, one in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Portege R830 cannot connect iPhone4S to USB port

  Hello world

  I have 5 Portege R830-138 with Win7x64 nine completely updated with the latest drivers and patches.
  Yesterday I connected my iPhone4S to the USB port on the right side and everything worked well (iTunes, tie, etc.).

  Unfortunately, this (the one on the right side) USB port no longer works for today: iPhone, mouse usb pendrives... nothing, it seems to be dead. The USB port on the left side still works with mouse usb and memories but not with the iPhone.

  I thought it was a problem of HW laptop on the right side USB port so I tried with a second Portege.
  Same problem: plug the iPhone on the right side, USB port, the USB port is not working.

  The same iPhone connected to my MacBook Air works fine.
  I wouldn't try with a third Portege, do you have any ideas?

  Thank you
  Valerio

  Hello

  The left USB port supports the standard USB 2.0 USB port on the right standard supports USB 3.0.

  I don't know if the Apple software supports USB 3.0 m.
  According to some information in the internet, USB 3.0 is not supported by Apple

• Cannot connect digital video camera

  Hello

  I tried in vain for hours connect a digital video camera to my Vista computer. I tried the camera on other computers and cannot connect to them either. It's a Sony Handycam and I used 4 Pin/4 Pin firewire cable 4 pin/6 pin. I also tried a USB cable. I'm running the camera in the game while restarting the computer, I tried to turn the camera on or off when you are connected to the count. I checked the settings of the camera and they all look great. I don't think that the problem is with the camera because I downloaded the video in addition to him in the past, but only once. Is there a chance that a Vista update caused vista to no longer recognize my camera?

  Thank you

  Russ

  Hi GraceRuss,

  It is unlikely that an update is the problem with the camera because the camera does not work on any machine. Looks like that there is a problem with the camera or a problem in the connection. You must consult the instruction manual provided with your product first and then consult with the support of sony. Thank you, Jeremy M - Support Engineer

• Cannot connect my digital camera to my Satellite L40

  When I connect my digital camera Samsung via one of my 3 USB ports, Windows (Vista) fact 3 low beeps instead of the somewhat usual acute beeps in one when the connection via the USB port. Nothing else happens and there is no sign of my camera connected anywhere.

  I connected the camera to another computer where everything works fine, so I know it is no problem of material with the camera or the USB cable.

  I can use other devices with USB ports, so don't know if there is a problem?

  Samsung told me that the device will work with Vista, Windows want £46 for any question and I can't seem to get through to Toshiba without calling in the USA!
  Any help in this would me much appreciated! I am not up on all the computer jargon so it should be a simple and clear answer.

  Dear fly

  What to say on this subject? The fact is that the USB ports are working if you can use it with other USB devices. If the manufacturer can't help I really don't believe Toshiba can do some miracle and make the cam works with your laptop.

  Try to remove the USB ports on the Device Manager, restart the computer and try it again.

• C - USB VGA card cannot connect to Macbook pro Multiport

  C - USB VGA card cannot connect to Macbook Pro Multiport

  Writing an effective question of communities of Apple Support

• EPC2203 modem cannot connect to the Mac via USB?

  I searched all threads and you can't find something to solve my problem.

  My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?

  Any help is very appreciated.

  To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.

• LaserJet P1505: HP LaserJet p1505 cannot connect to USB 3.0

  My client has an old LaserJet P1505.  When we try to connect to a USB 3.0 port... (which is the only type of USB port, the client has) a troubleshooting error appears stating that it must be inserted into a USB 2.0 port.

  Y at - it an upgrade of the driver for the printer on USB 3.0 or support is the new printer in order?

  Thanks for providing this information @KSM503.

  Make sure you connect the USB cable directly to the ports of Surface Pro 4 and not of the docking station. Then, it should be recognized.

  Thank you!

• Cannot connect the Lenovo Ideapad A2109 tablet to the PC via USB cable

  PC does not recognize my Lenovo Ideapad A2109 when connecting using the USB factory. Y at - it another option available to connect with success? Where can I get the drivers from?

  See here.

• Satelite C50 - B cannot connect to wireless local area network

  My brand new straight out of the box Satelite C50 - B cannot connect to my wireless network, when you are running Windows 8.1.

  When you run the wizard for the first time user, it was unable to connect to my network to register. And I have been unable to connect after starting the OS, even if my thread was visible and the signal strength would be strong. I entered the security network key, but the message came back "unable to connect to this network.

  However, when I started on a USB key to run Linux Mint 17.1, it took less than 5 seconds to connect to my wireless network. If the Toshiba hardware work properly, as also my wireless LAN.

  If I plug in a network cable, same Windows connects to my network and Internet.

  However, given that the C50 - B satellite comes with Windows 8.1 both of wireless capabilities, I was hoping someone here might be able to help me get a wireless connection in Windows.

  It's really strange. I have S50 - B and WLAN works properly. I used my laptop connected to several different networks and everything was OK.
  You can try to test with different wireless LANs?
  Have you checked all the WLAN settings?
  Try restarting your router.

  I mean if your laptop can detect WLAN, this means that the hardware is enabled and working properly. There must be a problem with the WLAN settings.

  Also check the advanced power settings, and then set it to maximum power WLAN.

• Cannot connect Skype

  Skye was working fine until yesterday, I took out for a meeting, came back and have since been unable to connect. The app status keeps rolling "signature", and after about 5 minutes, error that says "Skype cannot connect. I completely uninstalled and currently running the latest version, still the same issue. I am able to connect on my other devices, android phone and android tablet. Any suggestions?

  I tried to remove expired certificates, but that has failed.

  I'm sorry that I forgot to update this post.

  I have a system reboot after I re-installed and had to do for some reason any after my post. At startup, Skype connects successfully and I worked ok since then.

• Cannot connect Bluray Internet

  Shows the signal from the router but cannot connect

  Hello Ellen,.

  Welcome to the community of Sony.

  Check in the manual of the player, if the LAN USB UWA-BR100 card is needed to connect the player to the wireless network.

  You can download the manual here.

  Test the speed of the Internet being used from the link below.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1013044

  Internet connection speed minimum of 2.5 Mbps or greater is required for streaming of videos from standard definition (SD) and 10 Mbps or higher is required for high definition (HD) videos.

  Follow the steps mentioned below to resolve this issue.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1018338

  If the problem persists, perform the steps on the below knowledge base article to configure the network manually.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1025439

  If my post answered your question, please mark it as an "accepted Solution".

• Satellite A505 - sees, but cannot connect to, Wireless Router Win7

  I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.

  It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).

  I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.

  I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...

  What happens;

  (1) the wireless laptop sees my router (and neighbors), but just cannot connect.

  (2) I can connect with a laptop computer on the same USB wireless adapter.

  (3) I can connect the laptop to the router using a wired connection, and there is no problem.

  (4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.

  (5) this worked several weeks ago!

  What I've tried;

  (1) I have installed the latest REALTEK RTK8191SE driver.

  (2) I tried to disable the security on the router, no joy.

  (3) I deleted all the profiles of network on the laptop.

  (4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.

  (5) I tried to do a restore of the system to the closest possible point and no help.

  (5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.

  What's weird is that

  (1) it works ok using the wireless USB adapter

  (2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not

  (3) authentication failure almost instantly

  My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.

  Does anyone have any ideas on how I can proceed or had a similar problem?

  This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
  I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloads

  All that you have done is logic and I think I will try the same thing.
  Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
  Have you tried to connect your laptop to a friend's router?

  I really put t know what is the problem here but there are a few bad setting it.

• Cannot connect Tecra 9000 to wireless network

  Hello

  I am trying to connect my laptop Toshiba T9000 to my BT home Hub 2.0 Wireless v but a little difficulty.
  The laptop recognizes the hub, but every time I click on connect, I get the same message.

  ""Windows cannot connect to the selected network. " The network can be is no longer in range. Please refresh the list of available networks and try to connect again"

  I went through a few troubleshooting steps to resolve this problem, but always without success.
  Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?

  I am not very computer but if anyone has any additional input to help me with this question then I would be very happy.

  Kind regards
  Answer by quoting

  > Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?
  This may be possible

  The point is that this laptop is an oldie and the wireless network adapter appears to be old too.
  I ve no idea what WLan card you have, but you could try to connect to the WLan without use of encryption settings. Disable encryption on the router Wlan and test connectivity again. of course, this must be done only for testing purposes
  The wireless network must be always secure

  The alternative could be the use of external USB WLAN, it would be the easiest and fastest way for that to be resolved