Cannot connect my Satellite L500-1WG to Wi - Fi router Netgear

Similar Questions

• Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP 3 G ROUTER via WIFI (Realtek RTL8191SE). Connection is established, but after a few seconds, I'm going to 'blue screen' and restart the laptop.

  A-Link WIFI connection works very well with my Nokia X 6 phone (S60).

  Any help?

  Sitiper

  Hello

  BSOD code, you get exactly?

  Have you tried to update the driver WLAN? You can find the latest version on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite L500-1WG: network card works no - 31 code

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP ROUTER 3 G via an adapter (Intel 82567) without success.

  Under the general tab device manager says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». Then I updated driver-> Windows has determined the software driver for your device is up to date. Always the same message coming in general tab.

  Anyone have similar problems?

  Sitiper

  Hi mate

  This device doesn't work properly? Is - this WLan or LAN card?
  I m a bit confused but

  As far as I know the LAN and Wlan cell phone support for Realtek card.
  So, you can download the two drivers from Realtek page directly.

  Please set the BIOS to the default settings before you relocate for the two pilots.

  I hope this will help you!

• Satellite L500-1WG - black screen, turn on

  Hi all

  I am looking for some advice,
  I'm far from being a computer whizz but know my turn well enough. I put my model below.

  No apparent reason, I have the black screen.
  The laptop was working fine yesterday. Windows has shut down the computer automatically to install an update. Since the laptop this morning train, nothing.
  The power lights, flashing web cam, windows sound times.
  No courier. But nothing
  I can even enter my password and it is registered on. I tired to fix battery, but it did not work. Thanks in advance to all who wish to help!

  my model is
  Satellite L500-1WG
  Part number: PSLS0E-07501DEN

  Main features
  Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and
  Genuine Windows 7 Home Premium 32-bit (pre-installed, Toshiba-HDD recovery)
  -Intel Pentium processor T4400
  -DVD - RW SuperMulti drive (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB 2048 + 2048
  -39.6 cm 15.6 "TruBrite HD 1366 x 768 display high brightness with backlight LED with aspect ratio 16:9

  By pressing keys FN + F5 allows to switch between the internal and external screen.
  I recommend you connect the external monitor (or a LCD TV) and press the keys mentioned in order to verify if the external display will work properly.

  But I'm a bit confused... you said you were abele to enter the password...
  You see the field for the password?

• Satellite L500 - 1WG PSLS0E - impossible to reconnect wireless

  * Computer info: *.
  Satellite L500-1WG - Partnummer: PSLS0E-07502EN5

  Windows 7 Home Premium

  The drivers are up to date:
  -Microsoft Virtual WiFi Miniport Adapter version - date driver 21.06.2006 - 6.1.7600.16385
  -Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC - 30.07.2010 driver date version - 2017.2.730.2010
  -Realtek PCIe FE Family Controller - 23.06.2010 - version 7.23.623.2010 driver date
  I disabled the "allow the computer to turn off this device to save power" for all 3 of them.

  * Problem: *.
  When I start the pc, it connects to my wireless router as usual, but then after that 30-60 minutes it stops working. He always finds the wireless router and the signal is excellent (4-5 bars), but when I try to connect it gives me the error message that it is impossible to connect to my router.

  If I restart the PC, it is always impossible to connect.

  But if I turn the computer completely off and leave it for a while, it works when I start it again, which suggests that he may need to cool (we noticed that the computer is warm enough, and that the fan is spinning a lot... but that could have been the same before - just that we it has not noticed that it was not a problem)

  ... But if I only it hibernates and let it cool for a while, it does not work to reconnect when I start again.

  I did a test earlier: I started the computer and made sure the wireless connected - then I put into hibernation and he did it again, and after that, he was still unable to connect. Then I stopped had and turned on the right now - and then it works fine.

  It's the same question at the local library, but my in-laws it worked fine for 2-3 hours the other day.

  My other pc that runs on Ubuntu, works without problems on our wireless.

  Any ideas?
  -Is it a virus?
  - Or my card network is not able to take the heat (material)?
  - Or is this a bug of Windows/driver (software)?

  I plan to reinstall windows, but before crossing with whom I was wondering if it's worth the hassle... Is it a hardware error, and should I just go directly to the seller?

  What you can try is updated the BIOS. Latest version is installed on your laptop?

  Another question: where you find WLAN driver version 2017.2.730.2010?
  Toshiba's latest version 2015.1.0427.2010?

• Satellite L500-1WG - Windows Media Player does not display my library

  Can anyone help?

  I have a Satellite L500-1WG, I ripped out the music in my music (the default setting), and it does not show in my media player library. I spent hours trying to figure this

  Hello

  I think you should check the settings of the Windows Media Player library. In Options > library, you can choose the files that need to be monitored. I think you should monitor the folder where you have added music.

  Check this box!

• Why the DVD jerky on my Toshiba Satellite L500 1WG?

  Images are missing when I play a DVD on my Toshiba Satellite L500 1WG.

  Make sure that the video driver is updated.

  What application you're using to play the DVD?

• Cannot connect my Satellite L20 to AP

  Hello
  I have a satellite L20-214, just bought it and an edimax 7205 ap.
  Both supported the 80211b specifications.
  Access to the AP is completely open!
  But I can't get the laptop to connect.
  He sees the network in the list, but it just cannot connect to it.
  I tried all settings,
  The access point works perfect with smc cards and a few old books.
  I set all the possible settings in the config of Toshiba, disabled the encryption, change the channel to 1 because it is the channel of pref. of the ap and choose 80211b as prim.

  For now, I'll give some further tests before I have to return the laptop to the store because it's brand new.

  But I hope someone has an answer for me.

  [Edited by: admin on 28 May 06 06:28]

  Hello

  Also check if you can find the latest version of the driver for the WiFi card. Also check Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• I can't connect my Satellite L500 WLAN

  Laptop:
  Toshiba Satellite L500, windows 7 Home premium

  Problem:
  Something wrong with the wireless adapter, where it works very well for 30 minutes after the start of the computer, but all of a sudden, it is is turned off by itself and I couldn't allow it without having to restart the system. I tried to adjust the properties of power management of the adapter wireless, but for some reason that I could not reach it (tab power management in the adapter properties window is not there!)

  The problem is not because of the router because my other devices has no problem with the WiFi connection.

  Help, please

  Have you noticed this problem with the power supply batteries, power supply or using two of them?

• Cannot connect by Satellite A210 of WLan

  Hey,.

  I installed Windows XP on my disk hard of one another. I installed all the drivers, but when im want to connect to my WiFi,
  they say "cannot connect to the W - Lan, W - Lan not scope, or has been turned off. "Try again". Or something like that

  Hello

  You are looking for in this forum for similar issues and proposals of solution?
  Do this! There are enough discussions on these issues.

  What have you already tried to solve this problem?

  I mean that should first be the Wlan.
  Then you should put a right SSI, encryption, and password encryption.

  Did you do that?

• Cannot retrieve the Satellite L500

  Hello

  I have a toshiba Satellite L500 and windows vista is full of AppCrashes, so I wanted to restore the windows partition. The problem is that I can't start the rom of windows recovery by pressing F8 or hdd recovery by pressing the 0 key. When I press f8 and choose the windows recovery it just ignores me, shows me a Scott blak and the menu again.
  I tried to use Hiren boot to start, before my pen burned and I could leave them recovery, I just can't boot from them.

  Thanks in advance

  Hi Luis

  To be honest I didn t understand what happens exactly but check it please follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm
  and check how it works.

  Please post comments with exact explanation, which occur when you try to start the installation of HARD drive recovery.

• Cannot restore my Satellite L500 - 19 X

  Hi guys,.

  I recently bought a new Satellite L500 - 19 X.
  Had no real problems, until the battery died last night and now it won't start Windows at all.

  When I turn it on it comes up with "Start Windows normally" and "Launch Startup Repair tool" options. If I try to fix loads some files then goes to a black screen with the mouse. If I start windows normally he tries a fair bit and goes back to these two options.

  From what I've seen a lot of people have had similar problems, o all of sugested solutions have been in vain for me however.

  Could not load safe mode. Tried using the recovery disk that was provided and that brings just the same black screen with the cursor. Also tried booting the system without the bttery etc., which also did not work.

  I am (or at least try to run) running windows 7, which is already installed on the hard drive.

  For any help or suggestions would be greatly appreciated, Ive pretty much has everything well tried.

  Bravo for your time. Any help would be great.

  Hello

  Hmm. you have a courier flashing in the upper left corner?
  It looks more like a HARD drive problem or a partition

  But try this:
  Switch on and press F8.
  Then choose fix my computer and then choose (if possible) HARD drive recovery.

  If this is not possible then go into the BIOS and check if the HARD drive is recognized (all details should appear).
  If the HARD drive is not recognized, then this would mean that your HARD drive is defective.

  If the HARD drive is recognized then it might be something wrong with a partition on the HARD drive

  In this case, you can try to create a WinPE bootable system diskette:
  http://en.Wikipedia.org/wiki/Windows_Preinstallation_Environment

  Then the could format the HARD drive again and after that who could use the recovery disk to reinstall Windows 7.

  Welcome them

• Cannot connect by Satellite A305 Linksys WRT160N wireless

  I have a Satellite A305-S6839 with Windows Vista Edition Home Premium that I tried to connect wireless to a Linksys Wireless - N WRT160N router but I am unable to get the service.
  I can configure the router and it transmits properly, but for some reason that I can't connect to it. I tried to reboot several times that the manufacturer suggested unplugging the cables, but that did not work. I suspect that there are drivers I need to download for this operation.

  Someone give some advice?

  First, visit the Toshiba support site we and install the latest BIOS and Wifi Driver.

  Second, try to change the Wifi settings-Wifi card-> properties > Device Manager. Increase power output, select "802. 11 g-only", turn off energy-saving.

• Cannot connect by Satellite P750 to TV via HDMI

  Hello

  I am trying to connect a Satellite P750 with Windows 7 to a TV via HDMI and have had no success.

  I tried without success to the following:
  1. I chose F5 function to extend the desktop with desktop + HDMI, but also just HDMI only
  2. I tried the windows P for the use of projector function
  3. I tried different TV including Panasonic and Sony Bravia
  4. I tried another HDMI cable, I use my Xbox with
  5. in the devices section, I can see the TV is added and tried to change the settings, without success
  6. when I looked online for a solution, a solution was to download HMDI Control manager.
  7. After installing it and when I tried to use it, I got the pop-up message "using the HDMI control, you must activate it.

  So I was wondering if the HDMI port is not properly enabled. According to me, he works one way or another, otherwise the computer would not be able to detect the TV when connected.

  Can you please offer any assistance?

  > 1. I chose the F5 function to extend the desktop with desktop + HDMI, but also just HDMI only

  And what exactly happens if you press Fn + F5?
  You see the Toshiba Flash Cards appearing at the top of the screen menu while pressing FN + F5?

  Please note that the output screen must be changed before you start to play a video.

  Right channel/HDMI port is chosen in the settings of your TV?