Cannot connect remotely ASA5505 on code 8.0.5

Similar Questions

• Cannot connect remotely to an external hard drive on iMac

  I have trouble connecting to remote a Macbook (10.10.5) of an external HARD drive mounted which is connected to an iMac (Mac OS X 10.10.5.) The iMac is connected to the internet via an airport express base station 7.6.4.

  I created an account of sharing only to connect to this drive and I've had no success connecting to it outside the local network of this external hard drive.

  Because the Terminal airport express base station is involved, y at - it sort of port forwarding for connect to this hard drive mounting?

  I've only tried to plug the hard disk via finder > go > connect to server > name.local/locationOfExternalHarddrive of the computer and have had no success so I think the explicit base station is the question?

  Any advice is greatly appreciated!

  I've only tried to plug the hard disk via finder > go > connect to server > computer name.local/locationOfExternalHarddrive

  This is assuming you have CCMM configuration and working properly... without it, Wan, there is no way that the computer can find computername.local

  You need the public IP address of the router... and there may be only a single router. Normally, it is not possible to use IP because it is dynamic, with a home ISP accounts then you must configure the global DNS name or a dynamic DNS account.

  Please read Tesserax doco on remote... the best method is Apple CCMM.

  Airport drive - remote (3 methods)

  A simpler method in my humble OPINION is teamviewer... same as Apple CCMM without as many restrictions.

  Any method of remote access requires a careful configuration of the home network. And the Mac must be able to wake on lan... (apple have their own fancy name for it).

• Cannot connect remotely via VPN since installing the new modem/router

  Can anyone help please. Since the acquisition of a new router / modem I can no longer connect via VPN to my work PC remotely. It comes in I receive the error message. Can someone tell me if I need to change the settings for the new modem / router to access?

  

  Hello Joanna,

  Here are the steps you need to do first:

  1. Off static IP for my server and let the router assign IP address and changed the IP address of the port forward.
  2. Check the IP address because obviously, that changed when you plugged into the router again.
  3. Updated to the latest firmware for the router and NIC.

  For more detailed troubleshooting you can refer to this link: troubleshooting common VPN related errors.

  Let us know how it goes.

• Essbase Studio Console cannot connect remotely to Essbase Studio Server

  Hey all,.
  
  I could use some help with Essbase Studio... I installed Essbase in distributed environment (Studio, Integration Services, and Essbase Server are installed on the same machine). Now, correct me if I'm wrong, I'm starting Essbase Studio Console, when you are prompted, I should enter the server name (address) Essbase Studio Server where, as a result, the machine mentioned above. It works fine, when it's done in client tier installed on this machine, but I can't seem to log on remotely (from another place), the error is: network communication with the server failed. Check your network connection and try again.
  Connection timed out: connect
  All advice? Thanks in advance.

  The studio console can be located anywhere and connect to studio server, if the server of the studio is definitely up and running, it could be a firewall issue, make sure that the ports of studio are certainly open.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot connect remotely TestStand engine-17851

  Have had some strange behaviour tries to run the remote call in sequence. It works on certain combinations of PC, others do not! Ex.: A to B (and vice versa) works, C to D also works well, but has to C or C to A or B to D comes with the mistake-17851. As each station works at least with one partner, I expect that all the DCOM settings and configuration of remote engine are ok. This PC is on the same network, the same group, same configuration I see. TestStand version is 3.5 on all machines. Same Windows-TS-User and on all stations.

  Any idea or experience?

  SOLUTION FOUND:

  There must be a user who has logged on to the remote computer administrator privileges (as mentioned in the reference manual) and - very important - there must be a password set for these users.

  If a user without defined password logs on, Windows blocks all access remotely.

  Thanks for your support!

• Unable to connect remotely on windows 2008 R2 since my windows 8

  Cannot connect remotely on windows 2008 R2 since my wi

  Hey oceanpal

  Check out these links

  http://support.Microsoft.com/kb/2781106/en-us

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• Cannot connect wireless keyboard 700 v2.0, receive the error code 28.

  Original title: 700 wireless keyboard v 2.0 cannot connect to laptop

  Gentlemen.

  700 wireless keyboard v 2.0 cannot connect to the laptop, after checking the Device Manager said that "the drivers for this device are not installed. (Code 28) «,

  Hello

  What is a Microsoft Keyboard?

  Follow the steps mentioned in the article:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If you use try Microsoft Keyboard article below:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Try to download the driver of Microsoft Hardware download and check:

  http://www.Microsoft.com/hardware/en-us/downloads

  You can contact the Microsoft Hardware section if you have any questions:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope the above information is helpful.

• REMOTE DESKTOP cannot connect home via VPN to WORK computer

  Hi all

  Having problems connecting to the PC of Office WORK PC using remote desktop.  Currently, I connect to the WORK PC to WORK laptop with no problems.

  Page HOME of PC is a Dell Dimension 4600 Windows XP, version of Microsoft Office Home, ATT, anti-virus Norton 360 Wireless internet service.  Work VPN up and running.  Set up my computer remote tab in order to allow the communication and remote AUTHORIZED Norton 360 desktop, I can PING my computer work fine.

  I run my VPN and connect to function properly the network but when I run the Remote Desktop application, I get "this computer cannot connect to the remote computer."

  I know that my work IP address and logon information is exact and know that my work computer is configured to allow remote access because I do this work laptop.  I do not understand why my home PC has a problem if the VPN works and I can PING my computer work fine.

  Any advice would be appreciated. I looked all over the internet and cannot find additional ideas.

  Use teamviewer, it is much easier to understand. And you can give the PC connecting to a fixed password youre. If you do not have to change.  Just install on both, give the youre one connecting a password fixed, then log in with the other

  Is XP Home or Pro? If it does not support his home desk remotely

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• "Cannot connect to 201.86.73.83 remote connection! (what could cause this popup? where to check?)

  I tried to ask as to make following the question to someone else, but no response; try as a new query.

  DSL, router Linksys (tomato), a Windows 7 computer, put in place last November for the new project of a member of the family.

  The person who has implemented it access distance.  Here, it is used for Word and Excel, no music or video online.

  I came yesterday morning and found a popup in the lower corner toolbar on the right that says:

  "Cannot connect to 201.86.73.83 remote connection!

  (the IP is in the Brazil, I've never heard of him, found nothing more on this subject).

  The person who set up the machine has a long experience of Windows, changed some settings on the router and says "there is no evidence of the intrusion, so don't worry.

  But I know in general that "the absence of evidence is not evidence of absence" - so I'm still a little worried and if I see that again once I know what it means or where to look.

  Is there a log file where I could search by application (which one?) no matter what happened in the hours before, I noticed that popup?

  I do not know what newspapers is relevant if I can get to the lists and create a custom, view if I knew what to check.

  I don't know how long the popup is also present on the screen, the machine had been on it during the night and as soon as I took a screenshot of popup is gone.   It would be over an 8 hour period I want to check out.

  Hello, Hank

  With the information given, it is impossible for us to determine what came from this message. If it just happened one time, it may be safe to ignore.

  To be sure, it is not malware or a trojan virus, you can do a full security sweep.

• Remote Desktop is enabled on my computer, but I cannot connect to it remotely.

  original title: Remote Desktop

  conectivity remote desktop is active, but I can't conect to my computer remotley

  conectivity remote desktop is active, but I can't conect to my computer remotley

  How to ask a question...

  http://support.Microsoft.com/kb/555375

  http://www.officeforlawyers.com/howask.htm

  *********************************************************

  Assuming that the host/server [DRC] remote desktop PC running Windows 7 Ultimate/Pro/Enterprise or Vista Ultimate/Pro/professional or XP Pro/MCE...

  RDC is enabled on the server/host DRC PC?

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  It's on your local network and if so you call by computer name or address LAN IP?

  If you cannot connect through the LAN using the name of the computer can connect using the host/server local DRC PC LAN IP?

  Can you ping the host DRC/server PC of the RDC client?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  Test it on your local network...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  If you can connect successfully on your local LAN but can't remember, from a remote location, you have TCP Port 3389 open on the firewall and/or router as the server/host DRC PC is behind. Call using the public IP address of the router or the server/host DRC if your connected directly to a modem. You must also assign the host/PC one DRC address static IP of the server so if you restart the server/host DRC PC it keep its local LAN IP. Do not do can ruin any port forwarding system through any router your behind.

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  If your on a remote site you are trying to connect to the host PC DRC/server through a VPN? If Yes can you ping the server/host DRC PC when you have the active VPN tunnel?

  What are the exact error messages, if any, that you get when you try to connect with the DRC compression?

• My Windows Live Messenger cannot connect, error code 800488EBB

  Hello people of Microsoft or Windows 7... Where are you? My messenger cannot connect, error code 800488EBB... Please help... fixed time (the time of the window does not work)... It is the damaged operating system? How to do?

  original title: error 800488EB...!

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.