Cannot connect the macbook pro in normal mode

Cannot connect the macbook pro in normal mode

Are you getting errors?

How do you connect? You use Safe Mode?

What year/model MacBook Pro you are using and what version os OS X are you running?

Tags: Notebooks

Similar Questions

  • C - USB VGA card cannot connect to Macbook pro Multiport

    C - USB VGA card cannot connect to Macbook Pro Multiport

    Writing an effective question of communities of Apple Support

  • Connect the MacBook Pro as external drive

    Hello

    I recently bought an iMac 27 "(rétine 5K, 27 pouces, fin 2015)." I have also a 15 "MacBook Pro (early 2011).

    I understand that this iMac does not support the target Display Mode, but is there a way where I could plug in my MacBook Pro via a Thunderbolt cable and work out of files remotely from there? I know that I can connect to my MacBook as a server, but I do not think that it allows enough speed to transfer between the two. Ideally, it would be as if I hooked my MBP, as if it were a USB key.

    Thank you!

    Connecting them, then reboot the MacBook Pro with the T key pressed.

    (140041)

  • No sound when connecting the Macbook Pro to ext speakers.

    I have a MacBook Pro (retina, 15 ", mid-2014) running OSx 10.11.6 (El Capitan).

    It has a combined audio port 1/8 "for two speakers and a microphone. The internal speakers work very well and the port works very well with a helmet. What does not work must connect external powered speakers like the computer speakers or the port on a radio. It worked perfectly with all other computers that I have ever owned, and judging from the page linked below it should work for this computer, too, so what's the problem?

    Connect your Mac to a Hi-Fi, iPod, iPad, musical instruments or loudspeakers - Apple Support

    I tried it with a 1/8 "cable this single sound of the door (no tape for micro), and (when it does work), I tried to first insert an adapter that split the audio and microphone, but it does not solve the problem.

    How to make this work?

    I found the problem. When I plugged a cable into the headphone jack, the Mac automatically turned to the low volume - assuming I have connect headset. This is why I couldn't hear it. I open the sound applet in the system area and pushed back the volume of output to the top and voila - fixed.

  • Connect the macbook pro mid-2009, to a TV

    I could connect my mid-2009 pro via a mini display port HDMI and audio to my receiver. Now that I have a sound bar, I see the desktop on my TV but no sound. I understand that my MacBook pro model does not sound with this connection. Does anyone have a solution?

    Cable directly from the headphone output on a cheap amplifier, then to your Soundbar. It is unlikely to be able to the impedance of the speaker car directly.

  • Connect the MacBook Pro to Photosmart on the network

    Hello

    I just bought MacBook Pro again. I've successfully added it to my network existing Windows Vista equipped both a PC and a laptop. What I want to do, is to be able to print on my printer HP Photosmart 8250, which is connected to my PC from the new Mac.

    The PC is connected to a LinkSys wireless router and the printer is connected to the PC by USB. I have no problem printing the computer wireless windows laptop and I would love to do the same on Mac.

    Can you help me?

    Thank you!

    This should help.

  • Cannot lock the MacBook Pro with Apple Watch

    I do not see in Preferences-> Security & privacy-> system "Allow your Apple Watch unlock your Mac."

    The screen is just as it was before the Sierra.

    MacBook Air 13 "early 2015 - Sierra 10.12/Apple Watch - WatchOS3

    See you soon!

    I, too, am unable to lock my MacBook Pro with my Apple Watch. However I don't see the checkbox "Allow your Apple Watch unlock your Mac.". I checked it but I can not unlock my Mac with my Apple Watch.

  • Cannot use the MacBook Pro screen correctly in the unit

    I have been using Fusion for a few weeks and very happy with it.

    I've just developed a strange problem. I have a Setup dual monitor which was working fine but I can persuade is no longer Windows software to use the second screen (using a dredge or by revealing to show Powerpoint slide shows on the second screen) and I can't the software windows can only use about 3/4 of the MacBook screen. My Mac software works correctly on both screens. Windows Control Panel is pleased that there is two screens configured correctly.

    Any ideas as to what I could have done?

    I have attached a screenshot showing my primary screen screen problem.

    Thank you very much

    It seems that the tools do not work correctly. Access the one-stop unique mode, uninstall tools, restart Windows as needed and install the tools.

  • Cannot connect the Satellite Pro L series to TV

    Hello

    I have trouble displaying to an external source (LCD TV). There is no display when I connect to the TV. When I press Fn + F5 the only option available is the LCD cell phone IE. I checked on the driver settings and there is no option to select the parameters for a secondary/external monitor.

    Does anyone know what I need to do so that I can display to an external source?

    I use the connection of 15 pins with an adapter to convert video connection - is it ok or should I use the S-video connection on the back of my laptop?

    Any help would be appreciated

    Hello

    This TV option does not appear because you have connected the TV to the wrong place.
    The TV device must be connected to the laptop s-video port via compatible and s-video cable supported!

    Then, you can use FN + F5 to switch the display to the TV set.
    Please note: sometimes the s-video channel must be enabled on the TV!

  • PowerMac Pro doesn't recognize the MacBook Pro in target disk mode

    I'm trying to restore a disk from MacBook Pro from a backup, but my PowerMac Pro does not seem to recognize the MacBook Pro in target disk mode.  I have a FireWire 800 cable and adapter to the thunderbolt FireWire 800 port.  Is there something more I should do to get the Mac Pro power to recognize the MacBook Pro in disc mode target like an external hard drive?

    There is no "Power Mac Pro;" are you referring to a Power Mac (which would be less than 11 years), or a Mac Pro? You try to migrate data from the MacBook Pro to another Mac, or vice versa?

  • Cannot connect to the macbook pro guard icloud password request which I changed it too many times I don't remember and it still does not

    Can not connect to macbook pro, that keeps asking for password to icloud I have reset too many times I do not remember. Reinstalled operating system still does not work. Think to screw up the laptop and get back to a Windows machine. Not impressed with Apple.

    To connect to your computer, you must enter your computer in password journal, not your Apple ID.

    Otherwise, provide more details on exactly what is happening on.

    Writing an effective question of communities of Apple Support

  • I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

    I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

    Hi sonalnj,

    I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

    According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

    iPhone 6 s Tech Specs
    http://www.Apple.com/iPhone-6s/specs/

    Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

    OS X Lion mountain
    http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

    Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

    Update of OS X El Capitan
    https://support.Apple.com/en-us/HT201475

    Nice day!

  • Change of keyboard USB external Apple connected to the Macbook Pro

    Dear ladies and gentlemen,

    I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

    I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

    I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

    Thank you for your help in advance,

    Péter

    System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

    ... then the menu icon before, choose «Show Keyboard Viewer»

    Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

  • The MacBook Pro via generic ethernet adapter connection

    I am using a generic USB adapter to connect my MacBook Pro to Ethernet. It does not work. Any ideas?

    Contact the developer or visit their Web site for a suitable driver for your operating system.

    these things aren't always Plug and play.

  • Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

Maybe you are looking for