Cannot connect to Internet after reinstalling vista.
* - Original title - OUR Dell laptop came with the vista operating system
OUR Dell laptop came with the vista operating system. Myhusband dislike vista. Exp of Windows has been installed on our laptop. recently, virus disabled the jury mouse & key. I reinstalled vista. How can I connect to the internet. I get an error msg. the underlying ethernet connectivity required for the broadband connection was not found. pls install activate the ethernet adapter.
I see that you can not connect to the Internet after reinstalling vista. I'll help you with this problem.
1. What is the brand and model of the computer?
2 have you installed all necessary drivers after installing vista?
3. do you format the disk hard while re - install vista?
4. who is the ISP?
I suggest you to refer to this article and check if that helps.
Let us know if you need assistance with any windows problem. We will be happy to help you.
Can't connect to internet after removing a virus. Said in the currency manager there is a problem with the ethernet controller and can not find a driver when he found new hardware. Dell optiplex 260 - win xp - IE8
Hi PamJones. Check if the network in Internet Explorer settings are configured to connect to a Proxy Server and remove the option if there is. To do this:
You are now able to browse websites?
- Launch Internet Explorer (ignore the subject text unable to browse the internet).
- Click Tools > choose 'Internet Options '.
- Click the Connections tab.
- Click the "network settings".
- Make sure there's a check mark on the button "automatically detect settings".
- REMOVE THE check MARK from the option "use a Proxy Server for your network local (these settings will not apply to the VPN connection or access remotely).»
- Click OK to close the LAN settings window.
- Click OK to close the Internet Options window.
- Close Internet Explorer.
- Restart Internet Explorer.
Original title: System shows the connection, but cannot connect
-You receive an error message/code when you try to connect to the internet?
Follow the steps below:
Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:
Method 2: Reset Internet Protocol (TCP/IP)
To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
HelloI have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?Long story short, after several relocations (refresh option), I've noticed as a result of behavior:1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.2. when I restart the computer and any time after that, is STOP WORKING.Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).Help me please, since this is quite irritating :(
HelloI finally found the problem.The invisibility of the active network has pushed me towards the answer.biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.This should be corrected, as it would be a great help in this scenario.TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story).
When I double click on broadband connection, it won't open after installing windows update
* original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.
1. what operating system do you use?
2 you get an error message while trying to access the internet?
3 what updates did you install?
1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
Try the steps instep 1 in the article to put your computer in clean boot mode.
For Windows XP:http://support.microsoft.com/kb/310353
Note: To restore your computer to a Normal startup mode, follow these steps:
a. click on start in the box start the search.
b. type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.
d. When you are prompted, click on restart.
Install Windows updates in Windows 7
2 please check the items below to solve the problems of internet connectivity.
Thanks and greetings
Umesh P - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.
· Update that you installed before the problem?
· Are you able to connect to the internet properly now?
You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.
Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.
The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135
Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135
Hope the helps of information. Please post back and we do know.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I just had to reinstall vista (based on the recommendation of the forum do how can I install/uninstall anything one way). Now I can't connect to the internet, or my network. I have a laptop Dell Inspiron 1525.
It seems that I reinstalled the network adapter - at least when I started there was no category "network adapters" in the Device Manager, and now he has one with Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller under it.
Thanks to a different compurter I downloaded the thing Dell told me to download when I typed in my Service tag.
Also, I downloaded and installed the service packs 1 and 2 since for Vista, since I knew that they were on my orginal OS.
In looking at the network and sharing Center, it seems that network discovery is turned off. I tried to turn it on, but nothing happens.
Any ideas on what to try next?
In addition, I don't know if it's relevant or not, but when I reinstalled my OS, I thought everything would be gone, but the memory is always at the same level as it was before resettlement.
Did you follow the directions of Dell to reinstall Vista?
You do not say if yoyu used their disks or you have used the recovery Partition to do.
Here are two ways for you to read and see if it's what you were doing.
Using the Dell recovery partition:
Using the Dell disc:
See you soon.
Original title: "Network__".
We offer free wifi in our lobby and yesterday a man asked our pin # so he could get on the internet, we discovered after leaving one of our computers cannot connect to the internet as the name of network now shows its computer network and it has need of a code key passes and the password , how can we disable and back to ours?You gave your PIN #?There should be a reset button on your access to restore your system toby default. Of course, you will then have to re-enter many of yoursecurity data, unless you have saved it."Artic Auto Air" wrote in messageNews: 92aa11d3-77ea-4680-b04c-c415b59e2c66...> We provide free wifi in our lobby and yesterday a man asked our pin #.> so he could get on the internet, we discovered after leaving one of our> computers cannot connect to the internet because the name of the network shows now> like its computer network and there need a code key passes and the password, how> We turn off and back to ours?
We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP did the same thing, without effect. The phone line has been tested, it's ok. I swapped the cables to make sure that they are not defective. I moved the modem to return to the old location, but now it does not work there either.
WiFi seems to be ok and all our devices (phones, tablets, computer) recognize the wireless network and modem, but there is simply no internet connection. It is bizzarre! Nothing has changed, there is no new hardware, no updates or upgrades, the ISP is always the same, the only thing that differs is the location, in the same House.
The lights on the router modem are as follows:
Food - white
Internet - amber
DSL - off
WiFi - white
Any ideas what I could try to make it work again? Should I do a factory reset on it? This could be the cause? Move a modem do not stop working. We only had since November so it isn't old yet, and it has been working fine so far.
Any help at all would be greatly appreciated!
It has been a while now, but I thought I would update this for anyone interested or affected by the same problem we did.
After weeks of back and forth with the ISP and try and test anything and everything we could think, including the replacement of the D7000 in store warranty (not just once but), and nothing is helping, the ISP finally filed a foul for us and sent a CET. And what do we know? There was a flaw in the riding of Telstra which he had found, and which caused our internet connection fails. After that which has been set, we are online again. The line still falls here and there and the phone line is cute, but at least we are connected.
And now I'm fighting with the ISP for refund during all these weeks we were disconnected while they refused to be a mistake for us and have someone out. Time for a new ISP, I think!
Hope this helps someone else with the same problem there.
I had to reinstall XP Pro to my mesh recovery disk. (blue screen of death) Is no longer an icon in the network window, so I can't set up or connect to Internet even activate XP again. How can I fix?
You are probably just need to install drivers for your Ethernet card and perhaps other parts also. If you are not provided with a CD of drivers by mesh, you could be in trouble, mesh downloads site is not available, it was "closed until further notice."
If you have the driver CD, it can "autoplay" and install all the drivers for you. If this is not the case, there is probably folders separated on the CD for each type of driver installation.
If you do not have a driver CD, or have problems with it, let us know for more asitance. If you have the CD but can not get the drivers installed, please provide information on what you're trying and what happens when you try it.
Hard drive crashed. Reinstalled Vista who created a folder named Windows.old. I can't delete this folder or its contents. I tried the folder/file attributes, but it only works for some files.
Here are two useful sites about Windows.old:
How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vistahttp://support.microsoft.com/kb/930527/en-us
Have a look here http://support.microsoft.com/kb/931702/en-us
This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit). Again, I want to remind that I never had this problem before installing Windows 7.
-After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar. (It was how I was welcomed after the installation of Windows 7 is said by the way).
-The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.
Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)
Driver provider: Microsoft
Driver date: 14/05/2009
Driver version: 7.2.1127.2008
Digital signer: Microsoft Windows
Thus, we have solved the problem! There are two possibilities of your problems:
1 company Adobe uses the Bonjour service , this service should be disabled.
Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!
2. If it is not signed as Bonjour service. Try to disable the service:
Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).
It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!
my computer is very slow and I decided to install a clean copy of vista, and now I've finished my computer does not connect to the internet more. It will work with the wireless or wired Ethernet.
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > search for the latest network maps, etc. Vista drivers for it > download/install them.
The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.
Troubleshoot network adapter problems to Microsoft link above.
Mick Murphy - Microsoft partner
I can fill an update of vista on my laptop, but then I can't connect to my Wi - Fi. The same thing happens whenever I try to download a different anti-virus. The only way for me to get the network connection must complete a system restore.
Any help would be great
Understanding Windows Update and Extras in Windows Vista at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
See you soon.
Mick Murphy - Microsoft partner
Systems: Dell Optiplex 740
Operating system: XP Pro, SP3. Connected to the AD network.
Antivirus: Symantec Endpoint Protection
: Systems imaged with Symantec Solution Suite 2.5, running ghost console client, run office 2007, LotusNotes email client, Adobe Acrobat 9.0 pro, no odd/specialty software.
The following hotfixes have been automatically downloaded and installed this weekend. (The domain value autoinstall updated policy)
KB2296011 KB2345886 KB2360937, KB2378111, KB2387149, KB982132, KB979687, KB981957, KB2279986, KB2360131, KB2418241
System ran perfectly before the updates above being installed, applied.
1 - log on to the network, sometimes connection takes hours (2-3) to load a new or existing profile. This seems random, as some profiles allow an immediate connection.
2 - the system does not stop. Even if gone for 16 hours, it never completes the task.
3. can access local systems within the network through a UNC path, but very very slow. Can ping anywhere, ping also solves dns IP (google.com, yahoo.com, etc.). Can't access a Web page than IE. Curiously, install google chrome or any other browser allows web access - never through IE, however.
4. can not view or change the connections of the network adapters. Hangs and never completed the task.
5 USB devices not already connected to the workstation before above patches do not load/install, even if they were previously on this system. For example, a USB key that worked Friday does today.
6 - when the screensaver activates, system is not sometimes recover.
7 - safe mode with networking will run without problem. IE works, connects to the web. No hardware problem, no connectivity issues.
Here is what I have tried, in all possible and combination orders:
1. remove each patch listed above.
2. remove each patch listed above AND any referenced patch.
3 reinstall the SP3.
4. remove each piece of software other than the operating system.
5 - disable all services that do not work in safe mode with network.
6. Remove and reinstall the NIC drivers.
I am at a loss. I have an image before the explosion, and it works perfectly until these patches are downloaded and installed. After the restart, bam. So, I can easily reproduce the problem.
Does anyone have any ideas or clues as to what to try?
Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
If tweaking your third-party provider (i.e., Symantec Endpoint Protection) the firewall settings don't help, try the following:
1. disable all components Symantec Endpoint AND THEN make sure that the Windows Firewall is enabled.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #5 below.
2 Uninstall "a security update for Windows Internet Explorer 7 (or 8) (2360131)" [or "for Windows XP security update (2360131)" If IE6] via Add/Remove Programs (make sure the box show updates at the top right) and reboot.
3 d - c #1 above.
4. open Internet Explorer (only) to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g., KB2360131). If an update of root certificates is listed (possibly in the category of the optional software updates on the left side of the scan results window), install it to enjoy enhanced Internet Explorer security.
5 reboot & make sure that all in #1 above is activated again and, if necessary, disable the Windows Firewall and enable your third-party firewall.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
The stop charge to 90% to stay at this level.The laptop is new, but the battery bar software indicates a level of wear of 8.5%. How can I solve the problem?
When I got my macbook pro all the keys on the keyboard had a white backlight. Now, the keys of the Center have a greenish light, while the external are always bright white. What is the cause? It's horrible. I can adjust the brightness up and down
Hello I have an acer liquid e2 smartphone running on android jelly bean 4.2.1 recently, I bought a micro sd with a capacity of 32Gbs of kingston card at first glance, everything worked fine, but yesterday, I wanted to transfer files via 4Gbs. I notic
After uninstalling InCD 4 my drivers are defection, XP, all updates, will not let me restore to the previous time, uninstall and restart without help, everything wook fine, is there some how online I can download and replace these drivers
workstation running XP SP2 and installed the 4.8.00.0440 vpn client and cisco 1721. client VPN connected and after 2 hours, it cuts details of the journal 1203 14:25:04.125 07/06/06 Sev = Info/4 IKE / 0 x 63000017 Marking of IKE SA delete (I_Cookie =