Cannot connect to internet after upgrade to 9.3

Similar Questions

• Cannot connect to internet after upgrading to windows xp professional version 2002 service pack 1.

  Hello

  My labtop is hp nc6000. I have upgraded to windows xp professional version 2002 service pack 1 and I can't connect to the internet.

  I used another computer desktop to download service pack 2 and 3, but still cannot install these due to no internet connection.

  I also tried to upgrade the drivers of hp nc6000 obtained from another computer, but received a message that the package cannot be decompressed - another copy must be obtained.

  Please help with kindness.

  Thank you.

  Are you trying to connect wireless or ethernet cable? Have you checked your connections are enabled? If you use the wireless option, you use the hp or windows connection manager?

  I sugest you try to connect with an ethernet cable and go to the network connection in Control Panel and check if your local connection is enabled. If you connect through a router has the DHCP settings.

  If you use the wireless you will need to enter the connection as a new SSID and key details

• Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

  I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

  I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

  When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

  He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

  Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

  If I end up installing a new Ethernet card going to work?

  Any suggestions?

  Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

• Cannot connect to internet after removing a virus

  Can't connect to internet after removing a virus. Said in the currency manager there is a problem with the ethernet controller and can not find a driver when he found new hardware. Dell optiplex 260 - win xp - IE8

  Hi PamJones. Check if the network in Internet Explorer settings are configured to connect to a Proxy Server and remove the option if there is. To do this:

  1. Launch Internet Explorer (ignore the subject text unable to browse the internet).
  2. Click Tools > choose 'Internet Options '.
  3. Click the Connections tab.
  4. Click the "network settings".
  5. Make sure there's a check mark on the button "automatically detect settings".
  6. REMOVE THE check MARK from the option "use a Proxy Server for your network local (these settings will not apply to the VPN connection or access remotely).»
  7. Click OK to close the LAN settings window.
  8. Click OK to close the Internet Options window.
  9. Close Internet Explorer.
  10. Restart Internet Explorer.

  You are now able to browse websites?

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• Cannot connect to internet after Windows updates

  When I double click on broadband connection, it won't open after installing windows update

  * original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.

  Hello

  1. what operating system do you use?

  2 you get an error message while trying to access the internet?

  3 what updates did you install?

  1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps instep 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  For Windows XP:http://support.microsoft.com/kb/310353

  Note: To restore your computer to a Normal startup mode, follow these steps:

  a. click on start in the box start the search.

  b. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.

  d. When you are prompted, click on restart.

  Install Windows updates in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  2 please check the items below to solve the problems of internet connectivity.

  Why can't I connect to the Internet?
  Using the troubleshooter from network in Windows 7
  Use Network Troubleshooter event logs to solve network problems

  In Windows network connection issues

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Computer cannot connect to internet after the user changed network name

  Original title: "Network__".

  We offer free wifi in our lobby and yesterday a man asked our pin # so he could get on the internet, we discovered after leaving one of our computers cannot connect to the internet as the name of network now shows its computer network and it has need of a code key passes and the password , how can we disable and back to ours?

  You gave your PIN #?
   
  There should be a reset button on your access to restore your system to
  by default. Of course, you will then have to re-enter many of your
  security data, unless you have saved it.
   
  "Artic Auto Air" wrote in message
  News: 92aa11d3-77ea-4680-b04c-c415b59e2c66...
  > We provide free wifi in our lobby and yesterday a man asked our pin #.
  > so he could get on the internet, we discovered after leaving one of our
  > computers cannot connect to the internet because the name of the network shows now
  > like its computer network and there need a code key passes and the password, how
  > We turn off and back to ours?
   
   
   

• Cannot connect to internet after auto update under Vista.

  Original title: System shows the connection, but cannot connect

  After an automatic update in Vista in mid-August I can no longer connect to the internet.  My system tray shows that I am connected but I can't.  I'm on a DSL wireless connection with a desktop computer (one does not) and a laptop with XP that always works very well.  I re - configure the modem, uninstalled, and reinstalled the wireless card, has run an anti-virus in safemode, uninstalled the Qwest connection network and re-installed AND uninstalled the update to Vista.  I even tried the system restore to an earlier time.  Nothing.  Internet diagnosis says that it cannot solve the problem.  I have read other forums on the UN-checing proxy settings but mine have not been verified.  I re-set my settings IE8 by default.  Uninstall protection against viruses... What did I miss?

  Hi dozerman5676,

  -You receive an error message/code when you try to connect to the internet?

  Follow the steps below:

  Method 1:

  Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:

  The problems of Internet connection

  Method 2: Reset Internet Protocol (TCP/IP)

   

  To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.

  See How to reset the Internet Protocol (TCP/IP)

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot

  Hello

  I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.
  Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?
  Long story short, after several relocations (refresh option), I've noticed as a result of behavior:
  1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.
  2. when I restart the computer and any time after that, is STOP WORKING.
  Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?
  It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).
  Help me please, since this is quite irritating :(

  Hello

  I finally found the problem.
  The invisibility of the active network has pushed me towards the answer.
  biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.
  By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.
  In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.
  Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!
  The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.
  This should be corrected, as it would be a great help in this scenario.
  TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story).

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to Internet after reinstalling vista.

  * - Original title - OUR Dell laptop came with the vista operating system

  OUR Dell laptop came with the vista operating system. Myhusband dislike vista.  Exp of Windows has been installed on our laptop.  recently, virus disabled the jury mouse & key.  I reinstalled vista. How can I connect to the internet.  I get an error msg.  the underlying ethernet connectivity required for the broadband connection was not found. pls install activate the ethernet adapter.

  Fran

  Hi Joseph,.

  I see that you can not connect to the Internet after reinstalling vista. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2 have you installed all necessary drivers after installing vista?

  3. do you format the disk hard while re - install vista?

  4. who is the ISP?

  I suggest you to refer to this article and check if that helps.

  Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-vista&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• Compaq Presario C772TU l: I am not able to connect to internet after upgrade to Windows 10. It doesn't have the drivers LAN or WAN

  Hello
  My laptop computer with the Compaq Presario C772TU model number has no internet connectivity fade via LAN or Wifi. There are no drivers. Until now I was using windows 7 (64-bit), and it worked very well. After 10 of Windows it cannot find the drivers!

  Please help me to get the drivers. If I go to HP, they have drivers for Windows Vista, which installed but does not work only! Help, please.

  Hello:

  The ethernet card, the only suggestion I can offer would be to try the W8.1 directly from Realtek drivers.

  First driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Do you know what model of wireless network card your PC came with?

  The list of parts does not help me because it shows that there may be one of 3 different model wireless network cards.

  If you are unsure, please do the following so I can understand what your laptop's model card...

  Go to Device Manager.  There should be a category of other devices containing a list of devices that need drivers under this category.

  The wireless card is labeled as a network controller.

  Click the network controller device, and then click the Details tab in the upper part of the window of network controller device.

  Now you should see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the 3rd point (Hardware ID).

  After the first string of characters you see in the window.

• XP systems cannot connect to internet after updates applied over the weekend (10/29 - 10/31)

  Systems: Dell Optiplex 740

  Operating system: XP Pro, SP3.  Connected to the AD network.

  Antivirus: Symantec Endpoint Protection

  : Systems imaged with Symantec Solution Suite 2.5, running ghost console client, run office 2007, LotusNotes email client, Adobe Acrobat 9.0 pro, no odd/specialty software.

  The following hotfixes have been automatically downloaded and installed this weekend.  (The domain value autoinstall updated policy)

  KB2296011 KB2345886 KB2360937, KB2378111, KB2387149, KB982132, KB979687, KB981957, KB2279986, KB2360131, KB2418241

  System ran perfectly before the updates above being installed, applied.

  Symptoms:

  1 - log on to the network, sometimes connection takes hours (2-3) to load a new or existing profile.  This seems random, as some profiles allow an immediate connection.
  2 - the system does not stop.  Even if gone for 16 hours, it never completes the task.
  3. can access local systems within the network through a UNC path, but very very slow.  Can ping anywhere, ping also solves dns IP (google.com, yahoo.com, etc.).  Can't access a Web page than IE.  Curiously, install google chrome or any other browser allows web access - never through IE, however.
  4. can not view or change the connections of the network adapters.  Hangs and never completed the task.
  5 USB devices not already connected to the workstation before above patches do not load/install, even if they were previously on this system.  For example, a USB key that worked Friday does today.
  6 - when the screensaver activates, system is not sometimes recover.
  7 - safe mode with networking will run without problem.  IE works, connects to the web.  No hardware problem, no connectivity issues.

  Here is what I have tried, in all possible and combination orders:

  1. remove each patch listed above.
  2. remove each patch listed above AND any referenced patch.
  3 reinstall the SP3.
  4. remove each piece of software other than the operating system.
  5 - disable all services that do not work in safe mode with network.
  6. Remove and reinstall the NIC drivers.

  I am at a loss.  I have an image before the explosion, and it works perfectly until these patches are downloaded and installed.  After the restart, bam.  So, I can easily reproduce the problem.

  Does anyone have any ideas or clues as to what to try?

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If tweaking your third-party provider (i.e., Symantec Endpoint Protection) the firewall settings don't help, try the following:

  1. disable all components Symantec Endpoint AND THEN make sure that the Windows Firewall is enabled.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #5 below.

  2 Uninstall "a security update for Windows Internet Explorer 7 (or 8) (2360131)" [or "for Windows XP security update (2360131)" If IE6] via Add/Remove Programs (make sure the box show updates at the top right) and reboot.

  3 d - c #1 above.

  4. open Internet Explorer (only) to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g., KB2360131).  If an update of root certificates is listed (possibly in the category of the optional software updates on the left side of the scan results window), install it to enjoy enhanced Internet Explorer security.

  5 reboot & make sure that all in #1 above is activated again and, if necessary, disable the Windows Firewall and enable your third-party firewall.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• E2500 cannot connect to internet after re-configuration wifi

  After the initial Setup, if I go to advanced configuration and trying to modify the wireless router drops it's internet connection (looks like it does not acquire DHCP) and is incapable of is re - connect until I have reset to the default values and use the CD again.

  I confirmed that change the SSID or password it breaks, but I don't know about the other parameters.

  The firmware update seemed to kill it, also, but at that point, I gave up and am about to put the thing in the trash. My router linksys 15 years ago, works very well and doesn't have this problem.

  Hi there, rick2019. We are sorry for the inconvenience this is for you. Give us a chance to help you with this question and help solve you this challenge. Do you feel the abandonment of the Wired internet connection and wireless? Have you met the challenge even after the firmware upgrade yet?