Cannot connect to Mobilemarketplace on my phone or connect using the connector outlook on my laptop. Said LIVE ID error.

Similar Questions

• Satellite L750D - cannot connect using the administrator account

  Hello

  I have a Toshiba Satellite L750D-14R and it I cannot access to my administrator account, I had not changed my password or anything either, and, the night before, I had been on that fine and the next day he said my username or password was incorrect.

  I tried to put my password in full about 30 times and he wouldn't so I had to use the account invited to try and find a solution, whenever I connect I try to put my password and it still says the same thing.

  Can someone help me please?

  Someone at - it other access to your laptop? I mean the password cannot be changed without reason.

  Maybe a stupid question now but have you created the recovery disc? Problem is that without this password, you will not be able to install the OS by using recovery image saved on the HARD disk and in the worst case, you must reinstall OS by using the recovery disk.

• Cannot connect to the site Web of family security - loop redirection then error.

  I am trying to connect to the Security Web site for the family to see the log files and to make some changes.  Identification of phase of my work.  When I connect on the family safety I see it bounce login.live.com and site security for the family quickly and then I get an error.

  Connection
  Something was wrong and we cannot connect you right now. Please try again later

  I tried multiple computers and browsers.  Same results.

  Don't know if this is the magic bullet, but I've just updated some information on my profile (add my first and last name) and now I can sign as if by magic in Family Safety. I had also been down since the end of July.

• Cannot connect to the admin page of R6400 laptop, only on iPhone

  I installed a new router R6400 but can not access the admin of my laptop page. I was able to access it from my iPhone, so I am able to connect to the internet.

  I have talked to support 2 or 3 times and they always say the same thing: reset the router, type 192.168.1.1 in the address bar, try routerlogin.net or routerlogin.com, ping the router, check the IP address, etc. etc. I even tried to simply connect to the router via an Ethernet cable and still no go.

  Is someone can you please tell me why it does not work? I have read both articles, and they all seem to be saying the same thing. I just want to be able to access the admin of my laptop page. Someone at - he found a solution to this?

  I activated just improved Protected Mode and it worked. Don't know if it's the best solution (saw where to uncheck enable protected mode was an option too), but at least the admin site open - finally!

• The son works do not - cannot connect using the connection wired remote

  I tried to connect my other computer to the Internet using an Ethernet RJ-45 cable to connect to the Modem, and then plug in then. The computer is detected on the modem and the computer has detected the modem too. When I enter the user name and password and connect, it remains to the WAN Miniport PPPOE connection and then it says that the remote computer has failed. I restarted the modem several times. The defective cable or the computer is defective. My other computer running Windows XP Professional SP2.

  "Is the cable defective or faulty computer."

  Well, try another cable and limit it.

• Jabber user cannot connect using the AD account

  Hello

  I have a question about jabber/movi registering on local control of the VCS. They can't log in using their Jabber account on the control of VCS that have been configured on TMSPE. The connection error message is ' user/password incorrect or field name '...

  Jabber users who were configured manually on the TMS can sign in successfully.

  Connection between TMS and AD is ok and import AD users successfully.

  What should be the correct configuration on the authentication policy control VCS?

  > Sub-area by default?

  > Deafault area?

  > The traversal area?

  I also need to plug the VCS control on the announcement?

  Thank you

  Acevirgil

  "Verify the identification information" on the three - and Yes, the VCS - C needs to be added to our era.

  /Jens

  Please note the answers and score the questions "Answered" as appropriate.

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• I just got a new modem att wireless, now my phone cannot connect to the printer as it used to...

  just got a new modem att wireless, now my phone cannot connect to the printer as it used to...

  If AT & T has provided the modem, you can give them a call and explain the problem you are having. They should be able to help you. If you did not have all that in place, then it would be a little difficult to explain what you need to do... but... basically you would need to connect the modem and check the settings there and make sure your printer match the parameters.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• iPhone cannot connect to the server to iCloud

  Hello!

  My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

  WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

  His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

  I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

  Any help much appreciated!

  Does anyone have advice at all...? Aside from throwing the thing?

• The blackBerry Smartphones No. MMS option and cannot connect to the application server

  Good evening

  For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.

  The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.

  Any help?

  Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.

  Good luck and let us know!

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Cannot connect to the virtual store of Toshiba

  Nice day.

  I am from Slovakia. I bought online for my small son Tablet Toshiba Journe. We cannot connect to the virtual store of Toshiba. The worst thing is that I don't ever account of Toshiba's e-store. Unique number I found is the tablet in the user manual and PIN: GMH300087E10. Can you tell me please give access to the store online, but either way or help me to recover the virtual store. Son would be very happy.

  Thank you. Palo

  Hey. Write me a mail, I will send you instructions on the use of this tablet. Online store does not work me and once I have already reset the account.

  Roman

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• Skype cannot connect with the latest version?

  Hello there guys. I got the error "Skype cannot connect" with the latest version? I tried to reinstall Skype, so that delete my Skype folder in %AppData%, it did not work, I have to do? I tried to log in with your new account, still no luck? How can I sign in Skype... ?

  So I just fixed my problem by installing win 8.1 Pro 64 bit hehe Thx for the help anywayz.