cannot connect to my wireless keyboard

Similar Questions

• Satellite P750 - cannot connect to my wireless router.

  My laptop cannot connect to my wireless router.
  I tried to connect with the other laptop and it works.

  Help me

  Recommend to read some threads here in the forum "Wireless issue" of Toshiba.
  There is a lot of discussion on WiFi problems and how to solve this problem.

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• Satellite C660-1CZ cannot connect to my wireless router

  Hello comrades,.

  I have a problem to connect to my wireless router.
  We have 3 notebooks here at home, and all are able to connect.
  But my Toshiba laptop cannot connect. I don't know why...
  The latest drivers are installed for RTL8188CE.
  I'm sure it's the latest driver from 2011.

  My operating system is Windows7.
  I bought yesterday and tried everthing to connect with my easybox 802.
  I also changed some settings on the router.
  Can someone help me pls?

  On other laptops, the SSID of the router's Easybox-D77327, but my Toshiba shows just Easybox-D57327.
  Its not the same SSID but the router is good.
  In my view, the problem is that my laptop shows me a bad SSID of the router, but how to solve the problem...?

  You have the same problem when using the AC power mode and battery as well?
  Can you connect to the router if WLAN is not secure?

  An error message occurs when you try to connect to your router?

• Windows XP cannot connect to DSL Wireless Modem - locked mode "Acquiring Network Address", never connects. Broadcom wireless card

  I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.

  When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.

  The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).

  I am told that it worked (I can't confirm this, as the player crashed when I got it).

  Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.

  Thanks in advance!

  How do you reinstall Windows?

  If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well.  If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.

  If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.

  However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.

  The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.

  The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  Click the Wireless Networks (see screenshot)
  If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
  Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
  OK your way out
  Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.

  If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.

  If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• Cannot install mouse__ and wireless keyboard

  I have a dell dimension 2400 running xp.  I'm putting a new keyboard and mouse on it.  I have a logitech wireless keyboard and mouse.  When I try to install it I got an error box that appears and indicates the software
  > You are installing for this hardware has not passed Windows stable
  > Check compatibility. So I'm going to put the old Dell keyboard and mouse on it, the same thing happens.  So I tried to put back the original keyboard and mouse on and it will not accept it also.  I'm at a loss to know what to do.  I can't restore the system without the keyboard and mouse.  Help, please.

  Hello damom111,

  Thank you for visiting the Microsoft answers community.

  Try to start in safe mode:

  -Connect your original wired keyboard and mouse
  -Press F8 at startup until your get to the start menu > select Safe mode
  -Once in safe mode, you can uninstall the software and drivers for the new keyboard and mouse

  restart the machine to you and you should have a working keyboard and mouse. Now, try to reinstall the new keyboard and mouse, making sure to follow the instructions that came with your hardware.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect ot my wireless network after you run Setup WRE54G

  I bought a camera (ver. 3 - en) WRE54G refurbished. Just before the installation, I was able to connect to my wireless network, internet access, etc.

  So I ran the installer for the WRE54G to my laptop, which failed because the installation program could not connect to the diving (device was plugged).

  After this attempt, I am still able to connect to my wireless network at home with my laptop, however, I cannot access the internet.

  Other computers (macBook, my Galaxy Tablet) have no problem with the wireless network, only the laptop that ran the Setup program.

  I restarted the wireless router and my laptop several times. I then unplugged the WRE54G - no difference, Iam not able to access the internet.

  Can you please help?

  THX

  Never mind. For some reason any annihilated configuring the default gateway setting - so no DHCP, DNS server.

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect http - Centennial Wireless

  Hi guys.

  My application cannot connect to the web by HTTP server, when it works with the radio of the centennial.

  Do you know the Centennial wireless uses APN?

  If Yes, what is the APN username and password?

  You have an experience related to this matter (Centennial Wireless)?

  Thanks in advance.

  Hello

  I found this one:

  APN: private.centennialwireless.com
  Username: privuser
  Password: priv

  Thank you

  Bifocals

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.