Cannot connect to one or more systems of vCenter server: 5.5 DEVICE VCENTER

Similar Questions

• WebClient does not work could not connect to one or more systems of vCenter Server

  Hi all

  I just installed vCenter 5.5 and seems to have done very well.  I can log on to the client vSphere on my computer and see my vcenter server.

  When I log in the webclient service, I can't see my vcenter server.  There's nothing there.

  Also, I get the following error message at the top of the page of webclient when I connect:

  Cannot connect to one or more systems of vCenter server:

  https://domain:443 / sdk

  Question and reinstalled vCenter server has been fixed.

• VCSA 6 - could not connect to one or more systems vCenter Server - but I already deleted it...

  I have a recording of question in my server vcenter (VCSA) after adding a few VCSAs to a single SSO. All VCSAs are displayed correctly, but I removed an old... will be... No... die. It causes the initial connection to last 2 to 5 minutes. It shows immediately and the error on the top of the page indicating the "vcenter server in not available.

  

  As you can see, the VCSA referenced in the error message is not even in the list of 'the vCenter inventory'-> 'resources"->"Server vCenter:

  

  But it's somehow in the section 'License' from the same server vcenter:

  

  I think that screwing with the other parts of my installation vcenter because that stuff will be reached a limit of 120 and stop working. Here is a SS just try to look at the Configuration of the system:

  

  It expires essentially like some other windows. Originally vcenter be largely unusable.

  I think that the main problem is that I can't remove a stale VCSA Mode related SSO. It causes hanging on login and many never completed processes. I could increase the time-out period, but this will not solve the bland entry which is the culprit.

  Here is the error that occurred within the VCSA. It is every time I have to refer to something to check with other vcenter servers. Given one is more accessible, it is not able to speak, causing a timeout. The data service has expired because a main task took more than 120 seconds. See the vsphere client - virgo.log for more details.

  Okay it looks like you can run the command cmsso-util. Time consuming but gets the job done.

  VMware KB: Dismantling of the vCenter Server or a Services Platform controller

  hqvcenter1: / # cmsso - unsubscribe util - node-pnid balvcenter3 [email protected] name

  2015 04-20 T 15: 21:17.810Z order: [' / usr/lib/vmware-vmafd/bin/dir-cli ', 'service', 'list', '-login', '[email protected]']

  2015 04-20 T 15: 21:17.952Z done by running the command

  2015 04-20 T 15: 21:18.145Z order: [' / usr/lib/vmware-vmdir/bin/vdcleavefed ', '-h', 'balvcenter3', '-u', 'administrator']

  2015 04-20 T 15: 27:37.058Z done by running the command

  Success

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• I/o control of storage - "connected to one or more hosts pre-4.1 version...".  No, I'm not.

  Subject says it all.  When I click on the control of i/o Storage box, I get the message '< name of the data store > data store is connected to one or more hosts pre-version 4.1 that do not control of storage i/o support.  This is false.  There are only two servers connected, and they are the two 5.0 with the latest patch.  What gives?

  Apparently, it's a matter of having the correct license on you host.

  One company more SIOC support so if any host without it is connected to the data store, you will get the error.

  After thinking that out, it was to allow only on data warehouses that are connected to the Ent host exclusevly + and it worked without any errors.

  The one with my installation/ISO-files must have this option disabled because it is shared with the hosts having licences below.

  Of course, I pulled my hair on the error and started watching the bad VMs now outdated information for VirtualCenter until I found this blog:

  http://yuridejager.WordPress.com/2011/01/10/VMware-vSphere-4-x-error-the-datastore-is-connected-to-one-or-more-hosts-that-do-not-support-storage-IO-control/

  Hope this helps explaining your problem.

  (Yes, I agree that sucks it error if poster has nothing to do with the reason behind the problem in our case)

• Cannot connect to the app more

  Hi guys
  
  I can not connect to my appilcation more (single node install) 11.5.10.2
  
  I get the loginscreen (apache work. DB workin as before with the same credentials). But as soon as I get the password and click on enter I get the following error:
  
  oracle.apps.fnd.framework.OAException: Application: DNF, name of the Message: INVALID REQUEST of FND. Chips: APPL is fnd;. (Could not find message because there is no connection to the base)
  
  and then later in the stack:
  # # 0 in detail
  oracle.apps.fnd.framework.OAException: Application: DNF, name of the Message: INVALID REQUEST of FND. Chips: APPL is fnd;. (Could not find message because there is no connection to the base)
  at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:5526)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:958)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
  to _html._OA._jspService(_OA.java:88) oa
  
  
  Is someone can you please tell me where I can begin to solve this? I can't see all notes for this metalink.
  
  Thanks and greetings
  ceauke

  Hello

  APPLICATION OF INVALID FND. Chips: APPL is fnd;. (Could not find message because there is no connection to the base)

  This is a generic error and cannot stop here (as long as the database and the database listener are running).

  Do you think I should update the profile options with a SQL update to the base table? (It's only a game env so I did not "mind.) I wonder if the system that gets the same present when connecting.

  I recommend to update the options for profile directly, instead use an API.

  Please see the thread below for more details.

  Update profile at the user level options?
  Update profile at the user level options?

  Kind regards
  Hussein

• Somes devices cannot connect to WiFi TimeCapsule more

  Hi everyone, I am facing a weird situation.

  Current configuration: the home Wifi is provided by a TimeCapsule, which has its firmware updated. A couple of device (10) are regularly connected (printers, iMac, MacBook Air, iPhone, iPad, iPod, etc.). Nothing very complicated.

  The situation:

  This morning, I had 2 friends at home with their personal devices (one tablet of Nexus and an iPad 1st generation). I tried to connect to my Wifi and it never worked. On the iPad, the wheel turned in the parameter space WiFi and no internet connection was possible. No Wifi setting has been provided by the TimeCapsule (no IP, etc.). On the tablet of the Nexus, I got more details: he was blocked at the stage of IP address get.

  Obviously, my first thought was to restart my TimeCapsule. Unfortunately, nothing has changed: these new devices have been blocked at the same stage and... my daughter iPod also got stuck. Exactly like the iPod from my friend. But has been connecting iPod to my daughter to my wife for the last 3 years!

  My friends finally left, so the problem is "over", with the exception of the iPod of my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  On the TimeCapsule, I see that the iPod gets an IP address. Also, when I change the name of the iPod in the control area, I can launch a sync to iTunes on the iMac and the iPod name is updated! So, this means that the iPod IS connected via Wifi, but it is not possible to browse the Internet or connect to what. The WiFi icon does not even appear in the top bar.

  All other devices (iPad, iMac, etc) works perfectly.

  Any ideas?

  M.

  ... except for the iPod from my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  As you probably already know, reset the network settings deletes saved passwords and network configuration details. It also exports the residual caches and preferences. Most of the time, it should be fixed.

  As it didn't, the only other suggestions I could give are:

  • Go to the option "forget network Wi - Fi" in iOS settings and then manually try to join the wireless network yet.
  • If this does not resolve the problem, then possibly one or more of your Wi - Fi connection settings for your wireless network may have to be changed:
    • Make sure that the network name does not include spaces or special characters.
    • Don't 'hide' your Wi - Fi network.
    • Try temporarily disabling Wi - Fi security to see if the iPad will connect now.

• I can't connect to internet unless I'm using an ethernet cable. I am on a computer laptop lenovo and cannot connect to my home internet group. When I troubleshoot, my device is not found. What should I do?

  My computer now has internet but my laptop cannot get any internet without ethernet cable. When I troubleshoot, my device is also unrecognisable.

  Hello

  1. who troubleshoot steps did you try?

  2 did you change on your computer?

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I also suggest you to see link and check.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Troubleshoot low wireless signal quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

• My intex 3g data card cannot connect to the windows operating system 8, why?

  My intex 3g data card shows the following when connecting to the internet in the windows operating system error 8. The error message is "the system cannot find the directory entry for this connection".  but I can't use the telephone connection. Please find a solution for it.

  Hello! There is another easy method.

  1. install the compatibility mode Windows 7 driver.
  2. right click on computer and select manage, then go into the Device Manager.
  3 see. you other disks with the triangle on the bottom icon, right click and select Update driver software.
  4. Select Browse my computer for driver software.
  5. now, the path should be "C:\Program Files\Intex speed 3.5 G Datacard" with subfolders include verified.
  6 do this for all 3 of them and your drivers will be installed.

  FACT! Enjoy now.

• How can I control the number of clients connecting to one or more access points?

  Hi guys,.

  I am using several access points LWAPP/CAPWAP (1010, 1131, 1142) connected to the 4400 series wlan controllers (OS Version 4.2 and 7.0).

  Regarding the client connection to access points, I have several questions:

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  Best regards

  Thorsten

  Hello

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  YEARS-

  Here is the link for possible Maximum...

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
  
  c70ccfg.html#wp1085099
  
  Recommended , Not more than 20 clients per AP.

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  YEARS - here's the software bug that we had raised with the development team of thre...

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj94508

  Symptom:
  
  There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
  Conditions:
  Workaround:
  
  

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  YEARS - you can configure the feature aggressive load balancing across the WLC, it can help...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Xbox 360 cannot connect to my pc more

  before this error for months, I use my laptop and desktop computer to connect to xbox live without problem. I have the xbox plugged into the ethernet port on the pc and the pc over wifi with the shared connection that is naturally connected wireless to the router.

  The other day I connected the pc to the modem directly to test something and when I got together it all back but discovered that the xbox is no longer 'sees' the pc. have two PCs, I was able to reproduce the result into jumping once more directly into the modem then going back to the router. I guess once the modem for pc connection Jack, some setting has been changed I don't know and none of the solutions I found were applied to this oddity.

  Hello

  The question you have posted is related to the Xbox.  Please visit the link below to find a community that will offer in support of your application.

  Xbox support: http://support.xbox.com/en-US/

  Hope this information is useful.

• Cannot connect to my Windows Vista system that my password do not work.

  MY TOSHIBA EQUIUM LT IS 6YO. I HAVE THE RECOVERY DISK.

  AN outfit that have been paid eighty-five pounds for the support of a year now claim to allow to recover my LT I need windows vista disks to ensure my ability to log on as administrator and user. The two passwords do not work on windows vista edition access home premium

  Hello JohnBURTISM,

  See the link below for more information.  I hope this helps.

  Microsoft Answers: password forgotten, lost password/drive recovery disk

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/lost-password-lost-password-recovery-discdrive/c44e2a78-bff4-44dc-AF7D-a6f969f3b706

• [Error number: 0x8DDD0018] _ the site cannot continue because one or more of these Windows services does not work:...

  I tried to fix the automatic updates via the following Web sites to ensure that the BITS and the automatic updates function.

  http://support.Microsoft.com/kb/910337

  http://support.Microsoft.com/kb/883614

  The only problem is the history of the update, hidden restore updates, and change the settings appear dimmed.  Please don't tell me not to:
  To ensure that these services are running:
  1. click on start and then click Run.
  2. type services.msc, then click OK.
  3. in the list of services, double-click on automatic updates, and then click Properties.
  4. in the startup type list, select automatic and click on apply.
  5. Verify that the service status is started, if the service status is stopped, click the Start button.
  6. in the list of services, double-click on Background Intelligent Transfer Service (BITS), and then click Properties.
  7. in the startup type list, select manual and click on apply.
  8. check that the service status is started, if the service status is stopped, click the Start button.
  9. in the list of services, double-click the event log and then click Properties.
  10. in the startup type list, select automatic and click on apply.
  11. check that the service status is started, if the service status is stopped, click the Start button.

  I did it!

  Thank you
  gdv925

  Norton Utilities has a section "Manage your Services" where I chose a minimum on commissioning.  I 'restored' Services '' recommended '' and all is good.

• Error - Windows Live Mail could not be started because msmail.dll could not be loaded and one or more system DLL could not be loaded esapp.dll.

  Original title:. DLL does not charge any suggestions?

  ESAPP. DLL, MSMAIL. DLL does not load

  Hi KennethJenks,

  When exactly do you get these error messages?

  You can uninstall the KODAK EASYSHARE software from Add / Remove Programs and reinstall it back. Later, check to see if the problem persists.

  Due to Windows Live Mail, I recommend you ask your question to the Windows Live Mail support for assistance.

  Hope the helps of information.
  Please post back and we do know.