Cannot connect to the local file and print when the domain controller is not available because the network connection

Similar Questions

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100 - 02 M: cannot open the local area network to share files and printer - LAN Unplugged

  I have an office of another manufacturer which was connected by a wireless network via a Belkin router for a laptop another manufacturers - both running XP.

  I have now replaced the other laptop with a laptop Toshiba Satellite A100 - 02 M under Vista Home Premium. While I can still access the Internet from both machines, I can't open the LAN to share files and printers. The laptop shows 'LAN Unplugged' all the time. Any ideas would be accepted with gratitude.

  Ray Freeman

  Hello

  I have no general solution, but I'll try to give some advice solution;
  If you want to connect laptop with LAN cable both please make sure that you use a crossover ethernet cable.
  In addition, check if the network card is properly recognized in Device Manager.

  You could try updating the LAN driver and remove the NIC in Device Manager to update the installed driver.
  After restarting again the operating system should recognize the new (Lan) device and should install it automatically.

  I also studied a bit in this forum and found a similar thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14852&MessageID=54037

  Check the proposals contained in this message.

  By the way; Microsoft provides a very useful page on Vista and how to configure the network, the file and printer sharing and troubleshooting
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

• Cannot connect two computers windows 7 for the file and printer sharing

  Original title: trying to share files and printers on two computers and seem to have a firewall problem! Windows 7 is on both computers.

  I went through the setup procedures, I think, but still actually will not connect.

  Hello

  ·        How are you trying to share files and printer through the group home or workgroup?

  ·        What is put in place procedures have you tried?

  ·        How do you know that there is a problem with the firewall?

   

  Step 1:

  Temporarily, you can try disabling the firewall on the system and check. See the article mentioned below.

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  I also suggest you to disable the security software and check if you are able to establish a connection between the two systems.

  Note: Activate the wall and fire safety software once the scans.

   

  Step 2:

  I suggest you follow the steps mentioned in the articles below.

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system

  original title: Disk Image file

  While there, I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system. Pls help me remove :)

  I discovered what the problem was... :)

• cannot depend on a file of discovery and sharing files and printing

  I know this has been posted before but I can't find the right answer, I tried all of the suggestions I've found.  I still can't file discovery and sharing files and printing to stay on, I use Norton firewall and I always turn off no luck.  Have you checked all the services which are expected to be running and that they have tried the suggestion to try it in safe mode still nothing did nothing a sfc/scannow.  I am using windows 7 pro 32 bit summer trying to figure this out for a week.  I'm trying to do not have to reinstall windows.

  Thanks for any help

  I know this has been posted before but I can't find the right answer, I tried all of the suggestions I've found.  I still can't file discovery and sharing files and printing to stay on, I use Norton firewall and I always turn off no luck.  Have you checked all the services which are expected to be running and that they have tried the suggestion to try it in safe mode still nothing did nothing a sfc/scannow.  I am using windows 7 pro 32 bit summer trying to figure this out for a week.  I'm trying to do not have to reinstall windows.

  Thanks for any help

  Already responded to check if this may correct your answer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-turn-on-my-network-discovery-and-file-and/9e766e4b-3eb0-475f-B680-6bd75fbd3d2a

• Sharing files and printing turn off the coast

  I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?

  Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.

• XP Pro SP 3 firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected

  I am running XP Pro SP 3 on a working group. I'm trying to access the files from a Windows 7 machine on the same workgroup. But the XP firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected. When I disable the XP firewall, all right.

  Here are a few entries in the firewall exception log file:

  2012-06-01 09:53:25 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:26 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:27 DROP UDP 192.168.2.2 192.168.2.255 138 138 202 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:29 DROP UDP 192.168.2.11 192.168.2.255 138 138 202 - RECEIVE

  I did some research on another site, and I came up with the FIX for this issue. It has to do with the node XP somehow getting ready to type "Peer-to-peer". I applied the fix in this article:

  http://support.Microsoft.com/kb/903267

  and the problem is now solved.

  Please come back and let everyone know how you fixed the end!

  However, the fact that this has happened and you don't know how concerned me (if it was my machine).

  Here's what I propose for extra cleaning:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• I'm unable to set up file and printer between my laptop and desktop sharing. Both are Windows Vista.

  original title: file and printer sharing problem

  I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium.  The printer is connected to the desktop computer that is connected to the router.  The laptop is wireless.  In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on

  Hello

  What exactly happens when you click the icon of the computer on the network map? You get the error message?

  If possible after return the screenshot of the network card that could help us help you better.

  See the bottom of the articles that might help you resolve this problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Use the network adapter to manage and troubleshoot networked devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you

• Wonder about file and printer sharing (existing home network)

  Before you start what are the risks and problems with the file for example, virus,.

   

  So should I use the Windows Wizard or the menu of Linksys to enable files and printers shared on my Inspiron 2200 and my 4600 (Desktop) dimension. I use a HP PSC 1210 all in One (Wired to desktop), pilots have been implemented on the two compositions and I use McAfee Security Center without the Protection of privacy on the two compositions. So, how do this.

   

  Do I have to install the file and printer for MS Networks sharing? What is it?

   

  Router information
  Linksys Wireless-G 2.4 GHz
  Firmware Version: v3.03.6, January 6, 2005
  Current time: Tuesday, November 6, 2007 21:57:23
  MAC address: 00:07:E9:26:4F:5 has
  Router name: WRT54G
  Host name: D3DD5G31
  Domain name: phub.net.cable.rogers.com
  Internet

  Type of configuration
  Connection type: Automatic Configuration - DHCP
  MTU: 1500

   

  Message edited by Kenster102.5 on 11/06/2007 22:28

  Message edited by Kenster102.5 on 11/06/2007 22:29

  Message edited by Kenster102.5 on 11/06/2007 22:32

  
  

• How Exchange View screen between local files and remote server?

  I just need to know how to switch the display between local files and remote server, I want my files the on the left and the remote server on the right.  I had it set up before, but just got a new computer and can not remember how I did it.

  Its OK, I found it. Thank you

• How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  I want to continue my membership with Adobe, however, not if it requires some additional software purchase.

  For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.

• A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?  I can't even read the sticker because it has been moved to a separate column on the right.

  A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?

  I can't even read the sticker because it has been moved to a separate column on the right.

  Hi Bobca,

  I'm sorry, but the forecast of nail has been deprecated in the latest version due to security problems.

  Kind regards

  Nicos