Cannot connect to the web portal of VMware Data recovery

Similar Questions

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• WRT54G V8 cannot connect to the web-based configuration page?

  Earlier, I reset my router and was able to use 192.168.1.1 to visit the configuration page based on the web while trying to restore a home network, now that I have a new computer using Windows 7 that can not use the easylink advisor. I was able to get on the page update my SSID and WEP key. But when my wireless devices were still having problems to you connect to the internet, I tried to go back to the page and found that I can't seem to connect, even if my office is able to connect to other websites very well.

  Anyone know what I can do wrong? I use Verizon DSL. I was able to ping to the router and all tests have shown that it was connected fine, but I still can't get on the configuration page and my laptop can't connect to the network. I tried to reset the router again and still nothing. And Yes, I went through several cycles of power. I have also tried to move if the network card on my computer, but the computer said it was impossible to create a card for him, although at the time I had listed as a home network.

  Wireless on 192.168.1.1 connections often fail.  Using the router configuration pages, always use a computer that is connected to the WRT54G.

  If the above does not solve your problem, so here are my other tips to see the router configuration pages:

  You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system.  The router should work, but you will need to configure your router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• Cannot connect to the Web Interface using IE9 idrac6

  Hello world

  I was appalled last Saturday when I have downloaded voluntarily a remote server knowing that I would use the idrac to bring up, to see that when I tried to connect to the idrac he wouldn't my password.  I had to call the customer and send them to the site on Saturday night and I was very angry about this.

  After being, upward, that I tried several times to connect remotely and it still would not accept my password, I tried the reset of the OM Server page, but not to go.  I would put my password and it should Flash quickly "Access please wait" at the bottom of the screen, and then he would just go back to the login screen.

  I thought maybe it was a browser security issue, so I tried to add the remote site to my trusted sites and lowering of safety, but it did not help, so I tried various is to say like compatibility mode settings and still no go.  This has been tried on 2 different machines to Windows 7 with IE9, a x 64 and x 32.  Then I thought that I would try Chrome instead and it worked fine...

  So I tried a VM XP with IE8 on it, and it worked well.  It seems so - that IE9 is the culprit.

  I called in the systems management team and we tried which helps some ActiveX controls in the zone of confidence, but it did not help and he me basically what IE9 doesn't play well with the drac's and they are working on an update to fix the problem.

  This is perfect and I accept it, because I know I can get with another browser if I had to, but someone has actually managed to make it work with IE9?

  I have the same problem. But, I have found that if 'Remove' all under 'Browser history' (check everything: Cookies, history, temporary Internet files, etc...) it will allow me to connect and work for a while. Then I after a bit, it stops working. So again, I delete all log and work harder. This was a major pain in the rear lower.

  Oh, but I never have the ActiveX/native console to work. But I'm just using the Java plug-in.

• Cannot connect to the provider Portal

  When I try to log on to the portal the seller using my Blackberry ID Blackberry (that I used successfully to join this forum and post this message), my connection is rejected with the message:

  • This user name or password is not associated with a valid ID of BlackBerry. Try again.

  What is someone having the same problem?  Is there a work around?  Or is the portal site of Blackberry have a problem?

  Notes:

  Portal Internet address is:

  https://appworld.BlackBerry.com/isvportal/home.do?RETCODE=Ma%3D%3D&type=bG9nb3V0c3Nv

  And the address when I'm on the login screen is:

  https://blackberryid.BlackBerry.com/bbid/login/?callbackuri=aHR0cHM6Ly9ibGFja2JlcnJ5aWQuYmxhY2tiZXJy...

  Thomas

  All that was the problem, it is solved, because I took.

• Big Brother Live Feed will not play or cannot connect to the Web site.

  I can't connect to CBS.com to watch Big Brother Live Feeds. When I hit the button 'connect', or a 'secure connection' error or nothing happens and stays of sign - in the pop-up on the idle screen and won't go away. CBS.com has two different choices to click to connect, or working. It will work in Internet Explorer.

  refer to

  • Resolve the error message "secure connection failed".

  and

  • How to clear the cache of Firefox

  Items to solve this.

• Why "problem loading page" appears when I try to start firefox? I can access the page relevent medium of internet explorer, but firefox cannot connect to the web.

  A few days ago Firefox has stopped working when you use the shortcut or exe. file. The message http://en-gb.start3.mozilla.com/firefox?client=firefox-a & rls = org.mozilla: en - GB:official appears, even if when I paste this address in internet explore it works. What is preventing firefox to connect?

  One possible cause is security software (firewall) that blocks or limits Firefox without you informing on this subject, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox.

  See Server not found - the problems of connection and Configure the firewall so that Firefox can access the Internet and http://kb.mozillazine.org/Firewalls

• IE 8 cannot connect to the web site because of restrictions on computer

  By clicking on a link Web translates into a negative answer above.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Post back with answers/results for additional assistance if necessary. MS - MVP - Elephant Boy computers - don't panic!

• down loaded more recent firefox and now it does not connect to the web.

  Just did the new down load and restarting the Fire Fox cannot connect to the web.
  No problem before this new version.
  IE works fine. Chrome works very well.
  Only fire fox does not.

  You get this error message.

  See also article Firefox cannot load websites, but can other browsers .

• WANT to 114 does not connect to the Web server

  Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

  I tried everything-

  1 re-install services - error cannot connect to the web server

  2. Update - error cannot connect to the web server

  3 give the static IP address

  4 restore the default settings

  I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

  Hi sbenzie,

  How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

  Not yet given the information above, here's what I would try.

  I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

  Now try to connect to Web Services again.

• Connect to the Web server

  Just bought a HP Photosmart 7520 installed on Windows 7 Pro and cannot connect to the web server despite having internet connection any ideas

  Hi, sorry to hear that you're having trouble is your new printer connected to the HP web services. Here is a link to a post that covers some possible causes and solutions for connectivity issues. Hope that this help get you connected, but post back if your still having the problem.

  Good luck.

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/eprint-apps-connectivity-troubleshooting-please-review/TD-p/572635

• air application connects to the web service although swf don't

  Hey there,

  I will try and be brief. We built a kiosk application in flash builder a pure as3 project. When we went to convert it into an air application all seems fine except for two issues. one is that we cannot use the Security.allowDomain("*"); Tagus. not much we comment on this possibility, but when we do we cannot connect to the web service that we use. Here is the error msg that we get:

  URL http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid = 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  ioErrorHandler: errorProductId: WebApplicationException

  ioErrorHandler: currentTarget: Error #2032: error in workflow. URL: http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid =. 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  Here is the error of charles:

  < error >

  < > 103 errorCode < / errorCode >

  types of arguments < message > Incorrect or combination < / message >

  < errorDetail > WebApplicationException() < / errorDetail >

  false < success > < / success >

  < / error >

  now, if we run just the swf file it connects very well. the only reason I need this app to be in a wrapper of the air is so that I can remove the print dialog box. otherwise, I'd create just an exe file.

  any ideas would be great!

  Thank you

  OK, found the problem!

  When we built the as3 project and we implement web service calls, we used post from get we caused problems. We have been connecting to a service of qa so that may have something to do with it. In all cases, we have changed the headers in the air application to get and it seems to work fine. Why would he works in the SWF and not the air who knows, but there are go!

  Thank you

  Jorge

• Some Web pages do not allow (safari cannot connect to the server)

  I can't access some Web pages like the movie online, eBay, Amazon, etc. sites, when I try, I got the note as 'safari cannot connect to the server' and my chrome also got error like massage "this webpage is not available" more my App Store unable to work properly can not download updates»» I tried to delete all the data of the website... and uninstall extensions, but there was not work //I got a MacBook Pro 2014 middle with OS X EL capitan 10.11.2//some on help me please

  Please remove the 'ESET' product (if you have it installed) by following these instructions. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

• Cannot connect to the portal

  Keep my past is connected to the Web site through my watch, but I can't connect anymore.

  He tells me I have no valid credentials, but they seem to work the W450. I just use my user name to connect to the forums!

  Anyone else with this problem?

  Was finally able to connect the portal a few minutes ago. All is well for now.

• Web services Officejet 8100 printer cannot connect to the server

  I tried to set up ePrint - HP connected on my Officejet Pro 8100, which, for some reason, it's own decided to disable the eprint service. When I try to connect to get the confirmation code for HP connected, this message appears

  "Unable to connect to the server.

  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings. »

  I tried all of the suggestions posted in this post-

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/cannot-connect-to-se... - but none solved the problem.

  Apart from not using web services or filing a compliant under the terms of the UCC for the guarantee of marketability, what to do next?

  Hello RealGomer,

  Welcome to the Forums of HP Support!

  If I understand your message your Officejet 8100 is more connected to the Web Services and you have tried to assign a manual IP address of the printer.

  In the link you provided I have not seen any information about which server DNS has been used, because it is usually the cause / root of the problem, try to enter the DNS name of 8.8.8.8 & 8.8.4.4. To enter, you must be in the Web integrated to the network printer server.

  If this DNS information do not resolve, I'll get another for the DNS installation program.

  See you soon,.