Cannot connect to Windows 7 after update

I have Windows 7 Home Premium installed on my Dell Inspiron desktop computer. The other day, I installed a few important updates from Windows Update. I decided to restart the computer and it says stop then I did on my xbox while you wait for reboot. After maybe 15 minutes I noticed the screen was the same and the computer restarted ever. The circle animated on-screen icon was more moving. I left alone for a while longer without change. I restarted the computer and noticed that it took much more time to start. Finally, I would like to get to the windows logo screen where the logo moves. The logo suddenly freezes and stays that way. I started in safe mode, and he says that recent updates have not succeeded and it was back the changes. I'm still not able to log in. I can boot the system in safe mode, but it does not recognize my mouse and my keyboard to use. I can not even find my OS drive to use. I am very frustrated. I've had this computer for only a few months. Any help would be greatly appreciated.

You can probably fix this by using the system restore. Here we go:
1. keep tapping F8 during the first phase of startup.
2. select Repair from the menu.
3. Enter the administrator password when you are prompted. It is often empty.
4. When you are prompted, select System Restore.
5. set Windows to a point before this problem occurred.

If steps 1-3 does not work, you can do instead:
1. put your BIOS so that it uses the DVD drive as its primary boot device.
2 start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
3. Press any key when prompted to boot from the DVD.
4. When you are prompted, select System Restore.
5. set Windows to a point before this problem occurred.

Tags: Windows

Similar Questions

  • Cannot connect to Windows 7 after update November 2015

    After you install updates to windows on November 11, 2015, my system rebooted when prompted to and loaded windows up to the login screen.

    I have 2 accounts of users set up. A as an administrator and as a user with limited rights.

    I also have 6 machines which are all set in the same place that received updates.

    6 ALL now act in the same way.

    After selection of the user, users icons disappear just but normally at this point the password box comes upward, but after the update, the screen goes back only to the icons to logon.

    I tried safe mode, safe mode with networking, safe mode with command prompt and the ability to load the last known good configuration, but ALL have the same result, back in the log on screen.

    I use a VPN client mobile net movement, but I called the support for the net movement and they indicated that this is not a problem of netmo.

    I tried the default bios settings also.

    I don't have any ISO on USB, they are mobile units with no DVD. So I can't do a restore from the DVD system but could flash player if I had a.

    What was in this update and how to resolve this short of blow HD?

    All 6 machines do exactly the same after MS Updates, it is a problem of update.

    After a whole day troubleshooting, the following fix worked for me. Had to start by using a windows installation disc 7 to access command prompt and remove the package "KB3097877". Still called Microsoft, which offered to help "intensify" my problem if I paid $150 for a subscription.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-login-problem/51685076-e39f-42DE-B265-ca109ecfbd82?page=2

    Good luck!

  • Cannot connect to Windows 7 after updates

    That's what I'm left with after updates ran Friday:

    • All accounts are locked (including facial recognition). Clicking on a user comes back to the same screen without ever asking for a password. It's as if all the accounts have been disabled.
    • Try to get to the command Mode prompt course taking me in the Safe Mode GUI log in the page with the same behavior.
    • Try to go to the "last good known Configuration" does exactly the same thing.
    • Recovery disc does not work.
    • Reset system known as the recovery partition is corrupted (this is an OEM Toshiba installation).

    Any suggestions? Since I can't go to the command line... It is extremely important that I again have access soon.

    Hardware information: Stock Toshiba Satellite A505-S6030

    You can try restoring the system as follows:

    1. Set your BIOS so that it uses the DVD drive as its primary boot device.
    2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
    3. Press a key when prompted to boot from the CD.
    4. Select 'PC Repair' in the menu.
    5. Select 'Repair' when prompted.
    6. When you are prompted, select System Restore.
    7. Configure Windows to a point before the update on Friday.

    Since your recoery partition is now useless, it is essential that you create an image of your installation and store it on an external drive. Do this after you fix your current problem.

  • Cannot connect to Windows 8 after refresh.

    Original title: could not connect to Windows 8 after refresh. I'm about to lose my mind!

    I am LIVID!

    I updated my NEW laptop because Windows 8.1 caused a cargo problems and crashes. NEVER AGAIN.

    After refreshing, I could only login with a local that gives me access to anything. My normal password and log in as administrator using stupid windows live.com password no longer works.

    So, I changed the password for windows.live on another PC.

    Now this new password no longer works. WTF?

    I can't access any of my stuff that was installed and stored under the original user/password.

    I can't add a new admin account, I can not do an another drink or fresh install. Nothing. He just guard invited me to the password that it won't take.

    Also, when I searched this problem on the web, I see dozens and dozens of links for this problem.

    BUT when I go to the link, it seems that they have all been removed from answers.microsoft.    TRY to HIDE the PROBLEM?

    Can someone tell me how to get out of this nightmare, so I can access my original account. PLEASE, I BEG YOU!

    Please, I beg you.

    Hello

    Sorry for the delay in response.

    Please take a look at this article and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

    http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

    Here's another thread that has some good troubleshooting steps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

    Hope that the information was helpfula and let us know if you need assistance in the future. We will be happy to help you.

  • Cannot connect to AT & T after updating to Firefox 14.01. Chrome OK

    After updating Firefox to 13.01 14.01, I can't access my AT & T account. The newspaper into a web page loads normally, but when I fill in the fields name and password and enter, he returned to the home page, no error message, empty fields.
    13.01 worked as it should and so chrome.

    Hope you can help me with this!
    

    Al

    This can be caused by corrupted cookies.

  • Cannot connect to Windows 7 after Microsoft updates

    After the most recent series of updates to one of our laptops set up and configured, the office went into the log on screen. There is one main user on this laptop. When we click on the user icon, however, user, accessibility, and stop icons disappear for a few seconds, the animated 'wait' icon appears for a while, then the entire screen darkens, and this goes back in the log on screen. We are never faced with the prompt of password or any other message. This happens if start us normally or in Mode safe. We also tried to commissioning in the configuration "last good known", but the same problem occurs. We can enter the recovery tools, but the only available recovery seems to be the restoration of the original configuration of the C:\ drive.

    Is there a work around known for allowing us to open a session?

    Critical data are synchronized on a network drive, so there is little emphasis on this front. We would like to just avoid having to reinstall applications (office 360, Norton, etc.) which may require additional assistance to cancel lost installation.

    Richard Luketich

    Thomas Bidwell

    https://social.technet.Microsoft.com/forums/Windows/en-us/72ebe931-3dfb-4544-ad5e-64d0d46105c0/fix-for-Windows-7-touchscreen-users-kb3097877?Forum=w7itproinstall

  • Cannot connect to Apple ID after update to iOS 10

    You use an iPhone 6s, updated to iOS 10 yesterday. Immediately after the update, I found that I can not access the App Store, my music, or iTunes. There is no error message or prompt open a session my Apple ID, he said only: "loading" but never actually connects. Someone suggested a disconnection from the App Store through my settings so I tried. I've disconnected successfully but can not reconnect. I tried a dozen times to reconnect and one of the two following situations happens: I hit login and nothing happens or the prompt, I get my info and nothing happens. I rebooted/restarted my phone several times, connected on iTunes via my PC (successfully, but affects only not my phone) and put to update to iOS 10.0.2 but nothing never solved the problem. Help!

    Hi there, trekalong!

    Thank you for joining the communities Support from Apple! Looks like you are having problems with the App Store. The good news is, there are a few items with steps, you can try to solve the problem. Read this article with the steps toforce a nearby app on your iPhone, iPad or iPod touch. This will allow you to close the application you are having problems with.

    Then, check out this article with the steps to restart your iPad, iPhone or iPod touch.

    The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

    If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

    1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
    2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
    3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

    Have a great day!

  • Cannot connect to Windows and Microsoft updates

    Cannot receive Microsoft or Windows updates. I read some responses to download manually. How this is done, I'm not a computer guru!

    What level of SP is your Win XP computer?

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    and: http://support.microsoft.com/kb/901037

    Post back with any additional information that may be relevant to your problem.

    We also need to know if you receive specific errors etc..

  • Cannot connect to Game Center after updating iOS 10

    I know that in the update it delete the Game Center app (which personally I didn't really like that) but now when I try to play a game involving the Game Center, it said something like if please connect to Game Center or unable to connect to Game Center or something. I have even one where it shows a "connect" button, but it does nothing. I really want to be able to play these games, I used to be able to play. Of course there is no application to connect from. Can you help or give me an app that will allow me to log in?

    (Sorry it was the nearest appropriate community...)

    Nevermind I fixed it! Go to settings, then search for Game Center and sign in!

  • Cannot connect to the network after updating to iOS 9.3 Beta

    I downloaded and installed the public beta version of iOS 9.3 on my iPhone 6 today. After that, I am unable to connect to the network. I tried to reset the network connection of the phone and have my cell phone operator reset the network connection. None worked. Anyone else have this same problem?

    I was able to solve the problem by turning on "Airplane Mode" for 5 seconds, then shut off again. Everything seems to work fine now.

  • My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

    My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

    HI andrewcsfan1,
    I understand that Firefox cannot connect to a network after update.

    What operating system do you use? What is XP?

  • Error 641 cannot connect to Windows Installer and it could be installed incorrectly & error 80070641for Windows Update.

    Original title: Windows Installer does not properly.

    I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow.  I hope someone can help, Murray

    Hi Murray,

    Have you followed the steps in your previous post?

    Because of Windows Installer, you can follow this link & check if the problem persists:

    Problems installing and uninstalling programs on Windows computers

    Hope the helps of information.

  • Cannot connect because windows 7 does not recognizse my profile

    Original title: Mr. Wall

    Cannot connect because windows 7 does not recognizse my profile

    Hello

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

    Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

    You can run the Admin account hidden from the prompt by if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Unable to connect using Face Time after updating iOS 9.3

    Unable to connect using Face Time after updating iOS 9.3

    gshort319 wrote:

    Unable to connect using Face Time after updating iOS 9.3

    Use FaceTime with your iPhone, iPad or iPod touch - Apple Support

    Get help if you cannot make or receive calls FaceTime - Apple Support

  • Cannot record music on ipad after update to IOS 9.3.

    Cannot record music on ipad after update to IOS 9.3. In the view 'now playing' I could tap on the title that opens a window where I could score 1-5 stars. Now by tapping on the title just changes the display of the album. What can I do? I would be very unfortunate if I could rate is no longer my music while listening to it on the IPad. The 1-5 star rating still works in Itunes, but it is a great help for me. Thanks for help.

    Try this below the steps it will work!

    You must press the title to bring up the option enter a star...

    Once it is visible, touching it will bring back the title most of the time and allow entry only part of the time.

    "need to press the title of music playback and the rating stars will appear."

Maybe you are looking for