cannot connect to windows the first time I try to use the password. Enter it in the second time and it gives me access
I am using windows 7 Home premium 64-bit on an HP desktop with intel 3.4 GHz processor. About two weeks ago, I noticed that when I tried to connect to windows by entering the user password, the system would have indicated the incorrect password. Then I must enter exactly the same password again once, he would give me access. A few days later, I noticed that every time I tried to connect to a Web site that requires a user ID, the cursor would move in through all the ID I used on this site previously. Can someone help me fix this problem?
Hello
You did changes to the computer before the show?
Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.
Tags: Windows
Similar Questions
-
Cannot connect G585 to the second screen (HD TV)
Hello
I recently bought G585 with AMD Radeon E-1500 7310 HD graphics card. I installed Windows 8 and installed the latest video and audio drivers so depending on your reference page:
http://support.lenovo.com/en_US/downloads/default.page?
After that, I tried to connect the laptop to TV through VGA to HDMI cable, but without success. The laptop does not recognize additional screen. I tried several times with the same result. After several trying problems with Windows started. I had to reinstall OS. I'll appreciate assistance on your side to add an additional screen for the laptop.
Hi TheoNet,
Welcome to Lenovo Community!
This cable you use is intended for the HDMI to VGA.
I believe that this will not work. "VGA output only provides analog signals while the HDMI input will only take digital signals.
Converting cable will not work. It may be possible, but you'll need a Signal trans-codeur that converts the analog signal to digital like this:
http://www.eBay.co.UK/ITM/audio-VGA-to-HDMI-video-HD-HDTV-converter-box-1080p-/150531829415
Hope this helps
See you soon!
-
upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found
Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.
TT2
-
comes to connect in iCloud for the first time and to synchronize my calendars etc I noticed it all disappeared. How can I restore them?
They run iCloud.com? You have them on a computer?
-
Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.
Hello
If you have another system then plug your HARD drive as a secondary to another system & copy below the files of this machine.
C:\WINDOWS\system32\userinit.exe
C:\WINDOWS\system32\winlogon.exePaste these files in the same location in the C drive of the problematic computer.
Search now for your question.If it won't, then I suggest you to repair your operating system.
Thank you.
-
I stopped to receive mail after December 31. It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?
MacBook Air, OS X El Capitan
First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.
From the Mail menu bar, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
time and when I connect to mail hot that its gives me this message (we cannot connect to Hotmail right now. Please try again later.)
Hello
Make sure you are clicking a valid link:
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usError message "your account has been locked" when trying to connect
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2Compromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
ORIGINAL TITLE: Vista problems
Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.
Hello
What is the exact error message related to the windows registry?
I suggest you follow the steps mentioned below:
Method 1:
Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.
Method 2:
Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Method 3:
If the previous step fails, follow the steps in the link:
-
Original title: Windows Installer does not properly.
I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow. I hope someone can help, Murray
Hi Murray,
Have you followed the steps in your previous post?
Because of Windows Installer, you can follow this link & check if the problem persists:
Problems installing and uninstalling programs on Windows computers
Hope the helps of information.
-
Cannot connect to Windows Vista due to password problem
I have a Dell XPS computer laptop model PP28L and run Vista Home Premium. When I bought the computer I bought in a pawn shop. Of course it was sold with no records at all. No recovery or restore of Windows disks. I have a valid Microsoft "proof of License'for my Vista Home Premium. Should I be reinstall Windows and if yes how I'd get the disks.
* original title - cannot connect on Windows Vista Home Premium because someone changed my password, deleted my ID of the administrator and the guest connection. I am in the *.
Your only option is to do a clean install of Vista. There is no free, download of the disk. Contact the manufacturer of the computer and they may be willing to sell you a set of recovery disks to reinstall the system (but you will need 23 digit product key to activate it in all probability even if sometimes it is not necessary when it is made with recovery on the same computer discs).
Here is Microsoft's policy on software lost: http://support.microsoft.com/kb/326246 you can see is not much help.
If you can borrow an installation disk of Vista genuine of the same size of the bit of ANYONE, you can use that with your product key to re - install the system and start over (you get a new administrator account and set your own password for him - or to leave empty that you choose).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Cannot connect because windows 7 does not recognizse my profile
Original title: Mr. Wall
Cannot connect because windows 7 does not recognizse my profile
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
"We cannot connect to Windows Live Hotmail right now. Please try again later. »
This just started July 1st or 2nd. I can't open or send e-mails. I get a yellow-forbidden message that say, 'we cannot connect to Windows Live Hotmail right now. Please try again later. "I was able to access it using another computer. I see a lot of people with this problem, but I see no solution. Appreciateyour would help considerably.
Thank you
Donna
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help
Hello Gloria,.
I ask you to execute methods in the following link and check if the problem is resolved.
You can also contact the manufacturer to find out how to clean the print head.
http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en
Please get back to us with the State of the question.
-
When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?
Hello
Please refer to the help documents below to download the application Adobe CC:
Download, install, update or uninstall applications
Kind regards
Sheena
Moving to the cloud creative download & install
-
When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))
Look at the options of quick selection - particularly the four icons on the left.
Maybe you are looking for
-
To loop through all the leaves in numbers
How would browse all sheets in a file of numbers with AppleScript? (From here on, I'm wanting to rename each worksheet of the value of a cell on the sheet, but I think I found the part). Thank you very much.
-
Upgrading 3.6.7 - changed with the scroll arrows.
My arrows no longer function normally, but seem to have a new attribution of action. I would like to return to the default operation of these keys. I can't find any Info for that.(using XP and the new Firefox 3.6.7)
-
Hi, I use OS x 10.11.2 in early 2009 iMac. Somehow the spotlight is not the content of the internet. I want to check the weather in any city as "Weather in New York" etc. but it shows nothing on the internet. Do I need to install Extensions for mac t
-
Hey guys. My trial version of LabVIEW 2014 just ran and I can't build an installer for a .vi which includes the installation of data acquisition equipment so it can be run on any computer. The NOR cDAQ-9174 lets it read a digital signal which would g
-
HP deskjet 2544: HP deskjet 2544 incompatible ink/flashing lights ink intermittently
Despite the change of new cartridges, through aid and all operations includes the cleaning heads, cartridges with distilled water, coffee filters, the printer is still incompatible Advisor ink and the ink is not save. I used the scan doctor and the