Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.

Similar Questions

• Win'xp - sp3 is very slow to shutdown or Hibernate mode, the boot is OK. It's the same in safe mode, it takes stop 8' 45 ".

  I ran; Defrag, sfc;  Chkdsk; virus scan; and besides, all anything will do, someone at - it a suggestion?

  Hello

  1 did you change your computer, after which the issue started?
  2. is your operating system updated with the latest Windows updates?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Disconnect external devices such as printer, USB key, HDMI enabled devices and check if it makes a difference.

  Step 2:

  I suggest that you start your computer in a clean boot State and check if that helps.

  Note: The steps in the article to restart your computer as usual.

  See also:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• Can not turn on the same monitor if connected to the TV displays error no video signal".

  Original title: barely tv cell

  have on my computer and the screen does not light. He lit up a bit but not on. I have connected my laptop to my tv via the vga cable. Start the computer screen turns off after startup. Start in safe mode, it works. Restart n normal mode turns off screen. TV said no video signal. What causes this?

  Hello

  Try the steps mentioned below and check if they help to resolve the issue.

  Method 1:

  Use the option ' enable video low resolution (640 × 480) ' start and then update your video card driver

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  (d) log in your computer with a user account with administrator rights.

  (e) If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

  If these steps resolve the issue, you are finished. If this is not the case, go to the next set of steps.

  Method 2:

  Start the computer in safe mode and disable your video card

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.

  (d) log in your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  (e) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the list of categories of equipment, expand the category of display cards. Take note of your graphics card.

  (g) with the right button of your graphics card and then click on disable. Confirmation prompt, click Yes.

  (h) close all open windows and restart your computer normally.

  (i) when your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

• When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  Please follow it mentioned below as follows:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 reset the hosts - IP addresses redirected file may prevent you to complete the authorization process.

  • Run the host file fix in the cleaning CC tool.
  • Reset the file hosts manually.

  4 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  5 - raise the cloud creative app and connect

  Let us know if that helps.

• Firefox cannot load site on the same machine, but can be downloaded on the same version again

  I have Firefox 3.6.13 on two Windows XP computers. I have a monitor of TED 5000 that has an internal Web site, you can get by (http://geracjgosolar.dyndns.org:1095) and it displays well on one machine but I get a white gray Panel (default background) on the other machine. IE can display fine on both.

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

  Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
  Mozilla Crash Reporter

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

  Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

  Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

  Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

• Firewall: can I have the firewall of windows vista premium and the norton 360 firewall will at the same time?

  can I have the premium windows vista firewall and Norton 360 firewall will at the same time?

  Not recommended.

  Two firewalls running may cause conflicts.

  Choose one or the other.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Build 7600 this copy of Windows is not genuine - I can only run the computer in safe mode

  My son - under Windows 7 Home Premium - Dec 2010 laptop, purchased at Future Shop

  It has worked well for the past 2 years.  Suddenly, on Saturday, he stopped doing anything.
  That's happened?
  I don't know, but when I started upwards, normally, all I get is the 'black screen of death", with the words"Windows 7 Build 7600 this copy of Windows is not genuine ".
  I CAN'T DO anything HERE - can't make a right click, left click, CTRL ALT DEL, menu button - nothing works

  So I rebooted in SafeMode with networking - everything works fine.

  I have tried many fixes - when I read the topics - but NONE OF THEIR WORK in safe MODE
  slui.exe 4?  Does not work in safe mode
  Run?  Does not work in safe mode
  Start - computer - properties - activate windows now?  Does not come to the top, in safe mode
  However, he won't come to the top with a status or product ID
  Starter - activate windows?  does not work in safe mode
  I tried to download the windows / microsoft / genuine / validate the tool - but guess what, that didn't work either - update installation failed - error information 0x8007043C - probably does not work in safe mode - but that's all I have As
  I did a system restore - it 'worked' but ran very slow - and then when I restarted, the problem came back.
  and many others

  I ran Avast free on it - and anti-octets Malware - nothing - but I can only run in safe mode.
  Avast has some programs that run on the system re - start - but it does not start in normal mode - if none of them work

  I read a lot of topics on this - and I'm VERY FRUSTRATED

  I used another laptop - does the slui.exe 4 - and he asks me the activation key?  I can't that - not in safe mode
  I called the phone number - and talked to anyone - they told me to go through the www.howtotell.com - and report a counterfeit copy.  But it's NOT a COUNTERFEIT copy.
  OK - it's perhaps - but why it worked for 1.5 years?  And I bought from FutureShop, so should be reliable.  And I have the certificate of Authenticity on the back

  Don't forget - I can't do anything either in normal mode - but the Safemode with network works perfectly well.

  So, I don't know what to do.

  I don't think that's my problem - I bought a genuine copy, a reliable retailer.
  Anything you can do to help, would be greatly appreciated.

  I agree with this assessment.

  Hard drives come with a large number of spare sectors 'invisible' - it's only when they all well used by repair mechanisms built-in to the reader that the number of bad sectors Windows begins to increase from zero (in your case, it is a sector) means that there is already a significant degradation of the drive, and you can expect the count to start sooner or later back.

• Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before

  Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before the upgrade to windows 8

  Contact by web chat support.

  Mylenium

• XP SP3 cannot connect to WPA2 wireless network, but can Debian on the same PC.

  I have a Toshiba Portege M200 dual-boot Windows XP Tablet PC Edition with Service Pack 3 installed and Debian GNU/Linux codename Wheezy with Debian non-free package firmware-ipw2x00 allowing my wireless adapter to use and wicd package to manage wireless connections.

  Two operating systems are able to connect to a WPA - PSK network automatically without any problem whatsoever.

  Debian is able to automatically connect to a WPA2-PSK network without any problem, but simply Windows doesn't connect at all.

  Windows shows the WPA2 network in the list of available networks and correctly recognizes as having the WPA2 security.  However, when trying to manually connect, Windows ask me the network key (I have enter), then spend about two minutes «Waiting for network...» "with the usual animation and indefinite progress bar.  Windows back me to the list of available networks window, then shows me not connected to everything as if I didn't choose any.  When waiting for Windows to connect automatically, Windows will sometimes appear a bubble icon connection wireless network saying that it could not connect to one of my favorite networks but that he will continue to try.

  I get no error message or any other message of any kind.  Windows just trying with fanfare and fails silently.

  The two operating systems have updates of installed operating system vendor.

  Someone at - it ideas?

  To give a vision a little to the solution "install a new driver" discussed in the Technet forum thread, it seems that the problem here is the same as that commonly encountered when trying to update printer drivers: a user downloads the new driver and installs it but the problem remains.

  What happens is that if the older driver is not removed all first, it is not replaced by the new driver.

  Windows installs hardware devices using INFs.  They are located in % windir%\inf.  Actually, the previous statement is incomplete.  The first time that a device is installed, Windows uses the INF file to create a corresponding PNF file located in the same directory.  The PNF file is a "precompiled" version of the INF file and Windows Setup actually uses the PNF file because it is "more effective" to do.

  If you download a new driver and replace only the INF file and do not delete the old driver files, when you 'day' the driver, Windows Setup examines the old file PNF which points to the old files and uses.

  Then... either completely uninstall the device or at least delete the PNF file appropriate before attempting to install an updated driver.

  And download the new driver from Toshiba or the manufacturer of the adapter wireless in the computer.  Don't understand from Windows Update.

• Error 'this computer cannot connect to a homegroup. " How can I connect my 2 parts forming a home network?

  I'm trying to connect my pc with my pc upstairs downstairs (both HP pcs. 1pc is Vista, the other is 8.1). Now, I guess I'm on the right track to connect both PC and trying to establish them as a group residential when I get to the page of the homegroup, it reads 'this computer cannot connect to a homegroup' Finally I get 'service Homegroup provider is not running.

  How can I connect my 2 parts forming a home network?

  Thank you DVSMSC I missed it - you have reason. Homegroup is introduced in Windows 7 and works in 8 / 8.1 / 10 also, but not back to Vista.

• Cannot connect to my network, but I can connect to my network of neighbors several.

  I can't connect to my own network from my laptop/Vista computer Home. I can connect to my neighbours networks without any problem. I don't know why I can't connect to mine. When I do, it is said that LocalOnly.

  I can see my network but cannot connect to the internet.

  Hi Rhonda,

  Looks like you are faced with the question for a while now and I know it might be boring. But, do you have to follow the above troubleshooting? If so, what was the result?

  You can take a look at this article and see if it solves the problem.

  How to connect to a wireless network in Windows Vista

  I hope this helps!

• my Windows XP sp3 laptop completely stops working (tight) when plugin - container.exe is running. If I stop using the Task Manager, everything works again. Please advise as my addons arnt work not at all?

  Windows XP sp3 on a dell inspiron 1000 laptop siezes place completely after the launch of firefox 5.0.
  Ive always had the same configuration and update of firefox I'll.

  The "silver bullet" is to disable out-of-process-plugins, that could cause Firefox to crash instead of only the process that causes a problem.

  http://KB.mozillazine.org/plugin-container_and_out-of-process_plugins#Disabling_crash_protection