Cannot connect wireless Deskjet 6988

I have a new HP Pavilion Elite d5100t running Vista Home Premium (64-bit) SP1.  I'm also using Norton Internet Security.  The PC is connected to a, router/ADSL modem Netgear DGN2000 Wrieless - N.  I can not get my DJ6988 to a wireless connection.  First I tried the Secure Easy Setup with WPS buttons, but it does not work.  The router has indicated that no device was found and kept flashing the led on the printer wireless and network light never came.  I had the same result, even with Norton firewall disabled.

Then I tried the instructions in the guide of the network for the configuration of the printer for a software firewall.  I've disabled the firewall and connected the printer with the Ethernet cable connected to the printer EWS.  I gave the printer static IP address and then the value as the intellectual property as a trust in the firewall site.  I then started the installation of printer software.  The facility found the wired connection and I followed the instructions to establish a wireless connection.  After removing the cable, Setup finds the printer wireless and finished with all what it seems to be ok.  However, a test page does not print and the light of network on the printer never stopped flashing.

I went in the printer properties in Control Panel and manually entered the IP address and that did not help.  Also, I went into the router and reserved IP address using the MAC and host name in the report to the printer.  That does not help either.  I don't know what else to do.

I solved my problem.  It was my fault that I have followed the instructions in the manual of the printer and not the manual of the router.  What I've done I hit the button on my router setup and then click the printer button.  I knew not who hits the button on the router generates a new SSID (why, I don't know).  The right way to do it for my Netgear router is to connect to the router (in Internet Explorer) and run the installer in this way.  When do so through the connection of the router it keeps the network settings.  My printer works fine wirelessly now.

Tags: HP Printers

Similar Questions

  • Tecra M1 cannot connect wireless

    Hello

    This new but I hope someone can help me.

    I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

    I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
    I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

    Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
    No problem connecting via a direct cable.

    Thank you

    Hello

    have you tried to connect with another machine to check if it works?
    Otherwise, I suggest the following things:

    -Disable all security features
    -update the firmware on your router
    -dhcp instead of IP´s sets the value
    -read the manual of the router, sometimes they have weird parameters

    and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

    Welcome them

  • My computer cannot connect wirelessly.

    I accidentally downloaded a windows vista edition family basic model of office on my laptop

    Now my computer cannot connect wirelessly. Now when I tried to download the cd I wanted to down load which has windows xp, it has not work it says something about the material or the floppy disk. My model laptop is a Hp Compaq 6910p. Please help me

    Dear, Mizzy2Fy4U

    Hello

     
    1. from which site you downloaded Windows vista home edition?
    2. what operating system is already installed on the computer?
    3. What is the exact error message about hardware and the floppy?
     
    You can also perform the resolution of the problems of Internet connection and check:
    See the link provided:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
  • Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

    Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

    original title: cannot connect wireless

    Hello

    ·         You get the error message?

    Method 1:

    I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Also, follow the steps in troubleshooting section and check if that helps:

    In the Windows wireless network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

    Check out these links and check if that helps

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    See also:

    Solve problems with computers not appearing is not in the network map

    Hope this helps

  • HP Deskjet 3510: Cannot connect wireless with new router

    I got a new modem with router wireless integrated into my cable company.  Now, I am unable to connect wirelessly to my printer. He seems incapable of finding new wireless information.  The closest I could get the printer screen advised to 'hold the WPS button. '  However, my cable company has confirmed that the WPS NO button there and is not an option.

    Can someone help me get my printer working again?  Thank you!!

    @LisaC11

    Printer:

    E-all-in-one printer, HP Deskjet 3510 range

    Full software features:

    File name: DJ3510_1315 - 1.exe

  • CANNOT CONNECT WIRELESSLY WITH THE PRINTER!

    I need assistance to find, how to connect wireless my Windows RT (8.1) and my HP Deskjet 2541.

    Hello

    Gow do you connect your printer now? Are BOTH on the same network? Please try to use Wndows store to install HP AiO Printer Remote.

    I hope this helps.

  • Cannot connect wireless keyboard 700 v2.0, receive the error code 28.

    Original title: 700 wireless keyboard v 2.0 cannot connect to laptop

    Gentlemen.

    700 wireless keyboard v 2.0 cannot connect to the laptop, after checking the Device Manager said that "the drivers for this device are not installed. (Code 28) «,

    Hello

    What is a Microsoft Keyboard?

    Follow the steps mentioned in the article:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    If you use try Microsoft Keyboard article below:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    Try to download the driver of Microsoft Hardware download and check:

    http://www.Microsoft.com/hardware/en-us/downloads

    You can contact the Microsoft Hardware section if you have any questions:

    http://www.Microsoft.com/hardware/en-us/support/contact-us

    Hope the above information is helpful.

  • HP Envy 4500 cannot connect wireless to the printer

    Recently I bought HP Envy 4500 printer. Connected to my router ok TP-Link3631 and have successfully printed from android phone and portable computer connected wifi but cannot print wireless from the office, running XP Pro, but allows you to print via a USB connection. Office see printer through a router using 192.168. etc and printed the report. Have tried to install the software via disc cd and internet several times, Inc. reinstall, but can not get computer to connect. Have been round and round in circles several times, also used print and scan doctor without success. It seems that the software is not fully installed. Or maybe something wrong with the network. Anyone have any ideas? Thank you

    Hi @atr345,

    I see by your post that one of the computers is not recognizing the printer on the network, but you can print by a USB connection. I can help you with this.

    Type the IP address in the address bar of Internet Explorer to see if the built-in Web page printer server load on this computer.

    Check the computer IPV4 address to see if it matches the first 3 games of the IP address of the printer.

    Go to start, type cmd in the search box, enter, then type ipconfig.
    Check the IPV4 address.
    Now, check the IPV4 address for the printer. (192.168.1.9)
    Do the first 3 sets of numbers match? (if they do not match then the computer is not on the right network)

    Try and ping the printer.

    In the same window, type ping printers (space between ping and IP address) IP address
    What are the results?

    If the available printer built-in Web server, the first 3 sets of numbers of computers had matched the address IPV4 of the printer and you could ping the printer, then try and configure the connection to printer wireless via the USB connection.

    Installation of the software of the printer for a wireless network connection.

    Please go to the first step: preparation for installation, number 4.

    If you need help, let me know.

    Good day!
    Thank you.

  • SONY VAIO VGN-SZ28 cannot connect wireless with WPA encryption

    Hi guys

    I have a sony VAIO PC is unable to connect wireless if I have WPA and WPA2 encryption. When I decrease the security WEP device connects well. the laptop never asks the user name and password of the ad

    The type of security, I use WPA2 802. 1 x with PEAP-EAP-MSCHAPv2

    Please note the following:

    1. Wireless driver is updated to the latest version. I see EAP and WPA Press Cordless screwdriver
    2. Windows XP service pack 3 operating system

    no idea why I am facing this problem?

    Thank you very much

    Elijah

    Hi Elijah

    You can deal with a number of certificate on the laptop.

    If the wireless client is configured to use PEAP Protocol as you suggested the default setting is usually to check the certificate of the server. This would mean that you need to install a certificate on the laptop. However, there should be a setting on the client to disable the server certificate 'validate' If you do not want to (or cannot) to install a certificate on the laptop.

    See attached some screenshots.

    Concerning

    Roger

  • New routers cannot connect wireless for HP 3510

    I have a new router and you have to reconfigure the connection Wireless for my HP 3510.  I go to the printer and the installation program and to reconfiqure and it States to connect to a USB cable which I am there my new SSID and password on my PC which is correct, and then when I go to then it fails to connect.  What should I do?

    Called Technology Services, it took 2.5 hours to solve the problem.  It seems as the Deskjet 3510 series (mine is actually and 3512) has a big problem with the connection to suppliers IP router which I just got.  They did fix after taking possession of my PC, the software, re - install the software and then spending a lot of time to get an IP address for the router of unistalling.

  • HP 6500 E309n cannot connect wireless with 10.7 (Lion)

    I have a printer wireless HP 6500 E309n which worked fine in Snow Leopard, but not after the update to Lion.

    In system preferences, I can query power and using the printer utility levels, I CAN print a test page, but I can't print a configuration page.  Print a page configuration results in the message "could not print the configuration page.

    When I try to print from an application program I get the message "the printer is unresponsive.

    However, when I access the printer directly from Safari, I can print a page of "status of printer report."

    Yes, I have "reset" my printers (delete all printers) and reinstalled the 6500.  Yes, I went through a software update.  Yes, the printer works fine with other computers on the network.

    Help...

    It's weird.

    I unplugged and physically moved the printer next to the router to test a connection via a ethernet cable (worked fine) then he moved the machine to Lion to connect via USB (worked fine).  When I then connected wireless, it also worked fine.

    Apparently simply cut the power and reboot did the trick.

  • 8600 Officejet pro all-in-one: 8600 cannot connect wireless Officejet

    Unable to connect wireless when adding the printer.  I can see the IP address and the name on the report to the printer, but can not see the printer when I try to log on my computer.  It worked fine until I loaded the latest patch. It's the same thing with another 8600 and I got to the wire that one for the router to print.  This 8600 is too far from the router to run a cable (at the top). (only about 20 feet of actual distance.) I see that the printer is enabled on the router.  I tried to add the printer to the computer with the IP address and the hostname without success. We were working wireless until today.  I've uninstalled and reinstalled the driver without success.  Still do not see the printer.

    Any suggestions?

    I forgot to say that I fail to see the printer wireless to 2 separate computers - an 8.1 and other windows 7.

  • my laptop cannot connect wirelessly to the internet with the built-in wireless adapter

    G50-118NR my client specification identifies my network home qwest DSL WPA2 as public wireless whenever I connect wireless using the Atheros AR5007 802 wireless network adapter. 11 b / g WiFi and does not connect to the internet.  I can change the Private type, but it does not help.  I have restored the laptop using Vista Home Prem 32-bit recovery CD and that did not help.   The wired connection works perfectly and other 'g' and 'n' USB wireless adapters also work very well.

    Hello:

    Please read my post on the link below for the Atheros cards and newer routers, and see if you install the latest Atheros driver I posted on it works for you.

    http://h30434.www3.HP.com/T5/wireless-Internet-home/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

    Paul

  • Unable to connect wireless - Deskjet Ink Advantage 2545

    Hello

    Im having a problem to use a wireless connection to my printer, during installation, the following prompt message:

    Question: You have manually entered the name of the network (SSID) cannot be found.
    Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
    ============================================================================================

    I rechecked, the SSID and password has been entered correctly, but the same message always keep ready to.

    IM using Windows 7.

    What should I do?

    Hi @Francis78,

    I see that you have problems with the implementation of the printer on the network. You get the message "the network name (SSID entered) manually is not found". I would like to help.

    Cycle power to the router, computer and printer.

    Please double check the correct password and type of encryption, click the wireless on the taskbar, right-click on the name of your network, click Properties, click view the password, it will tell you the type of encryption and password. Spaces and special characters may not be recognized.

    Here is a document to set up the printer on the wireless network.
    Setting up the printer on a wireless network for HP Deskjet 2540 and HP Deskjet Ink Advantage all-in - One Printer Series 2545.

    If you have turned on Mac filtering, on the router, you will need to add the Mac address of the printer.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • After you uninstall Telstra cannot connect wireless software security

    I started installing security software Internet of Telstra which covered the part passing through. I had to reset the parameters of builders and uninstall the software of telstra and now I am unable to connect to telstra wireless and it seems that many safety equipment are turned on and I cannot change any settings.

    Any ideas?

    Hello!

    To be honest, I know a lot of internet security because s programs an interesting topic for me, but I've never heard of Telstra software.
    Where did you download this software?

    And I think you should give us a description of the error detailed what you man with security facilities.
    Maybe you should run CCleaner to clean up the system and registry files of Telstra.

    In the worst cases, you need to restore the factory using Toshiba Recovery disk settings. :(

Maybe you are looking for